Apple Intelligence is now available on iPhone, iPad, and Mac!

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Cannot air print since last update

Ever since I did the security update for my iPad mini I have not been able to connect to my printer. I have tried everything, nterrupt than other times reset the router checked what devices are connected and it still won’t do that. I’ve shut it off and on, rebooted it, done everything and it still won’t connect. My iPhone works fine. My laptop works fine and my husband‘s iPad works fine but not my iPad mini generation five.

Have others had the same problems? Please advise what to do to fix.

Thanks,

Annette M

iPad mini 5, iPadOS 17

Posted on Sep 26, 2023 12:28 PM

Reply
Question marked as Top-ranking reply

Posted on Sep 26, 2023 3:36 PM

Do you have any security Apps (such as Norton) or VPN installed on your iPad? If so, these may be interfering with your iPad's internal routing table - and may interfere with AirPrint/AirPlay and other Apple services. It may be necessary to temporarily remove such Apps from your iPad - and then perform a forced-restart of your iPad.


While restarting your iPad, a further restart of your WiFi Router may be helpful.


You’ll need to restart your network devices in the correct order. Assuming that you WiFi Router provides DNS services for your network, restart devices in this order - allowing time for devices to fully boot/restart prior to restarting other devices:


  • WiFi Router
  • Upstream wired Network Switch(es) (if any)
  • WiFi Access Points / Network Extenders
  • Other fixed infrastructure devices - such as Printers
  • Client devices (your iPad)


Restarting your iPad, after restarting other devices in the correct sequence, is most simply achieved by a forced-restart of the iPad:


  • On an iPad with a Home button: Press and hold the top button and the Home button at the same time. When the Apple logo appears, release both buttons.



  • On an iPad with Face ID: Press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the top button. When the Apple logo appears, release the button.




If you continue to have difficulties, check to see if your iPad is using the new WiFi Private Address feature. This feature is intended to provide additional privacy and security when using “public” (untrusted) WiFi networks.

Settings > WiFi > [Your WiFi Network / SSID] - tap the “i” icon - Private Address


The Private Address feature is largely unnecessary for your home WiFi network; if enabled, Private Addressing can interfere with anticipated operation of other devices, such as AirPrint/Airplay. In such circumstances, you may need to disable this feature - and can be enabled or disabled for each individual network.


Use private Wi-Fi addresses in iOS 14, iPadOS 14, and watchOS 7 - Apple Support


3 replies
Question marked as Top-ranking reply

Sep 26, 2023 3:36 PM in response to bannettes

Do you have any security Apps (such as Norton) or VPN installed on your iPad? If so, these may be interfering with your iPad's internal routing table - and may interfere with AirPrint/AirPlay and other Apple services. It may be necessary to temporarily remove such Apps from your iPad - and then perform a forced-restart of your iPad.


While restarting your iPad, a further restart of your WiFi Router may be helpful.


You’ll need to restart your network devices in the correct order. Assuming that you WiFi Router provides DNS services for your network, restart devices in this order - allowing time for devices to fully boot/restart prior to restarting other devices:


  • WiFi Router
  • Upstream wired Network Switch(es) (if any)
  • WiFi Access Points / Network Extenders
  • Other fixed infrastructure devices - such as Printers
  • Client devices (your iPad)


Restarting your iPad, after restarting other devices in the correct sequence, is most simply achieved by a forced-restart of the iPad:


  • On an iPad with a Home button: Press and hold the top button and the Home button at the same time. When the Apple logo appears, release both buttons.



  • On an iPad with Face ID: Press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the top button. When the Apple logo appears, release the button.




If you continue to have difficulties, check to see if your iPad is using the new WiFi Private Address feature. This feature is intended to provide additional privacy and security when using “public” (untrusted) WiFi networks.

Settings > WiFi > [Your WiFi Network / SSID] - tap the “i” icon - Private Address


The Private Address feature is largely unnecessary for your home WiFi network; if enabled, Private Addressing can interfere with anticipated operation of other devices, such as AirPrint/Airplay. In such circumstances, you may need to disable this feature - and can be enabled or disabled for each individual network.


Use private Wi-Fi addresses in iOS 14, iPadOS 14, and watchOS 7 - Apple Support


Cannot air print since last update

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.