My IPad sometimes says Not charging

Every once or twice every few days my IPad randomly says not charging. I sometimes think it just says that but is actually charging because when I go in settings it still says it’s charging but I don’t know. I cleaned the port, inspected the charging block and wire but it seems to only get more constant. I only had this IPad for 3 years so I don’t think it would be getting old. Though I have a few ideas that may be the reason It says that:

  1. I charge it on my desk, and the cord kind of bends, so maybe it’s just getting worn?
  2. I have to admit I sometimes the charging wire on the floor, it may have been damaged?
  3. I stopped letting it go under 30%, this might’ve glitched the charging icon


Those are all the ideas I have, I just posted this cause I’m worried if this is permanent

iPad, iPadOS 17

Posted on Sep 27, 2023 1:00 PM

Reply
Question marked as Best reply

Posted on Sep 27, 2023 2:33 PM

You may have symptoms of a failing Power Adapter, damaged cable, or damaged USB-C port.


These support pages should help with troubleshooting battery and charging issues:

Charge and monitor the iPad battery - Apple Support

If your iPad won't charge – Apple Support


Troubleshooting generally requires substitution of the Power Adapter and cable for another known-good item. Most models of iPad require a Power Adapter rated at 12W (i.e., 2.4A @5V) or greater to reliably charge. 5W Power Adapters (1.0A @5V) intended for older models of iPhone are inadequate to charge an iPad; if the iPad charges at all, charging will be very slow. Recent models of iPad are supplied with a 20W USB-C Power Adapter.


Some third-party USB-C power adapters (and portable PowerBanks) may not support USB PD (Power Delivery). Power Delivery mutually negotiates the charging voltage; the source, load and cable are all elements involved in the negotiation protocol. Unless the Power Adapter explicitly supports USB PD, it will almost certainly fail to charge the iPad; proprietary charging standards, such as QC (Quick Charge), are not supported.


Many computer USB ports also cannot source sufficient power to charge an iPad. Unless explicitly designed for charging connected devices, computer USB ports are typically limited to 0.5-1A @5V (i.e., 2.5-5.0W).


If you continue to experience difficulties when using an appropriate Power Adapter of 12W or greater, you might be best advised to seek assistance directly from from Apple Support. You can contact the Support Team using the Support link at top-right or bottom-left of this page. Alternatively, you can initiate and manage your support cases from Apple devices using the excellent Apple Support App. If not already installed, the App can be downloaded from the App Store:

https://apps.apple.com/app/apple-support/id1130498044


You might also visit the Genius Bar at your local Apple Store or Apple Authorised Service Provider (AASP) - where the technicians will be able to test and assess your iPad, Power Adapter and cable(s):

Genius Bar Reservation and Apple Support Options - Apple


Similar questions

2 replies
Question marked as Best reply

Sep 27, 2023 2:33 PM in response to MrPigWig

You may have symptoms of a failing Power Adapter, damaged cable, or damaged USB-C port.


These support pages should help with troubleshooting battery and charging issues:

Charge and monitor the iPad battery - Apple Support

If your iPad won't charge – Apple Support


Troubleshooting generally requires substitution of the Power Adapter and cable for another known-good item. Most models of iPad require a Power Adapter rated at 12W (i.e., 2.4A @5V) or greater to reliably charge. 5W Power Adapters (1.0A @5V) intended for older models of iPhone are inadequate to charge an iPad; if the iPad charges at all, charging will be very slow. Recent models of iPad are supplied with a 20W USB-C Power Adapter.


Some third-party USB-C power adapters (and portable PowerBanks) may not support USB PD (Power Delivery). Power Delivery mutually negotiates the charging voltage; the source, load and cable are all elements involved in the negotiation protocol. Unless the Power Adapter explicitly supports USB PD, it will almost certainly fail to charge the iPad; proprietary charging standards, such as QC (Quick Charge), are not supported.


Many computer USB ports also cannot source sufficient power to charge an iPad. Unless explicitly designed for charging connected devices, computer USB ports are typically limited to 0.5-1A @5V (i.e., 2.5-5.0W).


If you continue to experience difficulties when using an appropriate Power Adapter of 12W or greater, you might be best advised to seek assistance directly from from Apple Support. You can contact the Support Team using the Support link at top-right or bottom-left of this page. Alternatively, you can initiate and manage your support cases from Apple devices using the excellent Apple Support App. If not already installed, the App can be downloaded from the App Store:

https://apps.apple.com/app/apple-support/id1130498044


You might also visit the Genius Bar at your local Apple Store or Apple Authorised Service Provider (AASP) - where the technicians will be able to test and assess your iPad, Power Adapter and cable(s):

Genius Bar Reservation and Apple Support Options - Apple


My IPad sometimes says Not charging

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.