USB ethernet connection still not working on ventura 13.6.4! what a shame!

I don't understand your comment about testing with an older computer?

Note that none of the services <...> are attached to the hardware mentioned

but if I do $> ifconfig

I get ...

en5: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

ether ac:de:48:00:11:22 

inet6 fe80::aede:48ff:fe00:1122%en5 prefixlen 64 scopeid 0x4 

nd6 options=201<PERFORMNUD,DAD>

media: autoselect

status: active

so the hardware Apple T1 COntroller seems "active"

Another thing is, I cannot any other network service than a Thunderbolt

and the one in service ("inactive")

bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

options=63<RXCSUM,TXCSUM,TSO4,TSO6>

ether 82:86:7a:25:dc:01 

Configuration:

id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0

maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200

root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0

ipfilter disabled flags 0x0

member: en1 flags=3<LEARNING,DISCOVER>

    ifmaxaddr 0 port 8 priority 0 path cost 0

member: en2 flags=3<LEARNING,DISCOVER>

    ifmaxaddr 0 port 10 priority 0 path cost 0

member: en3 flags=3<LEARNING,DISCOVER>

    ifmaxaddr 0 port 9 priority 0 path cost 0

member: en4 flags=3<LEARNING,DISCOVER>

    ifmaxaddr 0 port 11 priority 0 path cost 0

nd6 options=201<PERFORMNUD,DAD>

media: <unknown type>

status: inactive

??

Oh! dear ...I have few errors on disk check and some inode issues*** ... but I laso tried another USB-C adaptor and it worked but using the MAC address of the bridge0 (above) not of the ether hardware!

So, the adptor below is not working anymore on my mac but did on my wife's Dell

(besides ethernet it has also HDMI VGA and USB A or B, but I didn't try them recently on my mac)

***

error: object (oid 0xb39c64d7a6841da9): o_cksum (0x136a758e9b9e011d) is invalid for object

error: object (oid 0xb39c64d7a6841da9): o_type invalid, o_type 0x51080fd4 should be 0x72656373

error: object (oid 0xb39c64d7a6841da9): o_subtype invalid, o_subtype 0x1e30fc98 should be 0x0

warning: volume keybag (44693556+1): block range isn't a valid keybag, skipping checks

Checking volume /dev/rdisk1s1.

Checking the APFS volume superblock.

Checking the object map.

Checking the snapshot metadata tree.

Checking the snapshot metadata.

Checking the document ID tree.

Checking the fsroot tree.

warning: inode (id 111185310): dir-stats key xf does not exist, despite internal_flags (0x8412)

warning: inode (id 116371053): dir-stats key xf does not exist, despite internal_flags (0x8012)

Also, I was wondering if I deleted these services would I be able to re-add them?

I had a second USB LAN service (the same as the one existing), so I must have been able to do so ... but now I don't have that choice? so?

Ok guys, forget all this (or maybe not as it is not custom things on a mac) ... but I went to https://www.startech.com/fr-fr/stations-d-accueil-universelle-pour-ordinateurs-po/dkt30chv and downloaded new pilots for this! compatible with Ventura 13.6.4 ... and now ethernet is working ( the <...> AX88179 USB 3.0 to Gigabit Ethernet) perhaps the System settings could have section on pilots or extensions or apps that are not working anymore with the updated OS?

Cheers now ;) pfff