iPad charges intermittently even by the seconds unless I am lucky enough to clean it successfully or unless I hold it up or down to get a good connection. No dirt discernible. Any other more effective solutions?
Windows, Windows 6
If the charging cable won’t properly seat or easily fit into the charging port of the iPad, this might indicate that either dirt or lint is obstructing the plug, or the plug or charging socket have been damaged. A damaged charging cable must be replaced - whereas a damaged charging port must be repaired.
Removal of an obstruction is often best entrusted to the technicians at the Genius Bar of your local Apple Store or Apple Authorised Service Provider (AASP) - where the appropriate tools and expertise are available:
Genius Bar Reservation and Apple Support Options - Apple
If the problem is due to a visible obstruction, you may be able to remove it yourself. With good light, using a sharpened wooden matchstick or plastic toothpick, very gently try to dislodge a visible the obstruction from the socket. Be careful to avoid damaging the delicate electrical contacts within the socket. Note that a USB-C socket has an obvious "tongue" within the socket - this making the task difficult and risks damage to the USB-C port.
If the charging problem is not mechanical, these support pages should help with troubleshooting battery and charging issues:
Charge and monitor the iPad battery - Apple Support
If your iPad won't charge – Apple Support
Troubleshooting generally requires substitution of the Power Adapter and cable for another known-good item. Most models of iPad require a Power Adapter rated at 12W (i.e., 2.4A @5V) or greater to reliably charge. 5W Power Adapters (1.0A @5V) intended for older models of iPhone are inadequate to charge an iPad; if the iPad charges at all, charging will be very slow. Recent models of iPad are supplied with a 20W USB-C Power Adapter.
Some third-party USB-C power adapters (and portable PowerBanks) may not support USB PD (Power Delivery). Power Delivery mutually negotiates the charging voltage; the source, load and cable are all elements involved in the negotiation protocol. Unless the Power Adapter explicitly supports USB PD, it will almost certainly fail to charge the iPad; proprietary charging standards, such as QC (Quick Charge), are not supported.
Many computer USB ports also cannot source sufficient power to charge an iPad. Unless explicitly designed for charging connected devices, computer USB ports are typically limited to 0.5-1A @5V (i.e., 2.5-5.0W).
If you continue to experience difficulties when using an appropriate Power Adapter of 12W or greater, you might be best advised to seek assistance directly from from Apple Support. You can contact the Support Team using the Support link at top-right or bottom-left of this page. Alternatively, you can initiate and manage your support cases from Apple devices using the excellent Apple Support App. If not already installed, the App can be downloaded from the App Store:
https://apps.apple.com/app/apple-support/id1130498044
You might also visit the Genius Bar at your local Apple Store or Apple Authorised Service Provider (AASP) - where the technicians will be able to test and assess your iPad, Power Adapter and cable(s):
Genius Bar Reservation and Apple Support Options - Apple
If the charging cable won’t properly seat or easily fit into the charging port of the iPad, this might indicate that either dirt or lint is obstructing the plug, or the plug or charging socket have been damaged. A damaged charging cable must be replaced - whereas a damaged charging port must be repaired.
Removal of an obstruction is often best entrusted to the technicians at the Genius Bar of your local Apple Store or Apple Authorised Service Provider (AASP) - where the appropriate tools and expertise are available:
Genius Bar Reservation and Apple Support Options - Apple
If the problem is due to a visible obstruction, you may be able to remove it yourself. With good light, using a sharpened wooden matchstick or plastic toothpick, very gently try to dislodge a visible the obstruction from the socket. Be careful to avoid damaging the delicate electrical contacts within the socket. Note that a USB-C socket has an obvious "tongue" within the socket - this making the task difficult and risks damage to the USB-C port.
If the charging problem is not mechanical, these support pages should help with troubleshooting battery and charging issues:
Charge and monitor the iPad battery - Apple Support
If your iPad won't charge – Apple Support
Troubleshooting generally requires substitution of the Power Adapter and cable for another known-good item. Most models of iPad require a Power Adapter rated at 12W (i.e., 2.4A @5V) or greater to reliably charge. 5W Power Adapters (1.0A @5V) intended for older models of iPhone are inadequate to charge an iPad; if the iPad charges at all, charging will be very slow. Recent models of iPad are supplied with a 20W USB-C Power Adapter.
Some third-party USB-C power adapters (and portable PowerBanks) may not support USB PD (Power Delivery). Power Delivery mutually negotiates the charging voltage; the source, load and cable are all elements involved in the negotiation protocol. Unless the Power Adapter explicitly supports USB PD, it will almost certainly fail to charge the iPad; proprietary charging standards, such as QC (Quick Charge), are not supported.
Many computer USB ports also cannot source sufficient power to charge an iPad. Unless explicitly designed for charging connected devices, computer USB ports are typically limited to 0.5-1A @5V (i.e., 2.5-5.0W).
If you continue to experience difficulties when using an appropriate Power Adapter of 12W or greater, you might be best advised to seek assistance directly from from Apple Support. You can contact the Support Team using the Support link at top-right or bottom-left of this page. Alternatively, you can initiate and manage your support cases from Apple devices using the excellent Apple Support App. If not already installed, the App can be downloaded from the App Store:
https://apps.apple.com/app/apple-support/id1130498044
You might also visit the Genius Bar at your local Apple Store or Apple Authorised Service Provider (AASP) - where the technicians will be able to test and assess your iPad, Power Adapter and cable(s):
Genius Bar Reservation and Apple Support Options - Apple
No, I don’t know what kind of cable or adapter you’re using, but I can tell you that I had the same issue for about a year. I bought three new cables and cleaned my charging port on my iPhone 11. Every second day. Until I found out that it was because the cables I bought what’s too cheap, I buy 3 m cable every time I didn’t know there was such huge difference in quality. When I changed the cable to an original Apple the problem stop almost immediately😊
Hello!
First, I would suggest trying a different cable, and a different outlet, and seeing if the issue persists. If so, before you risk damaging the charging port with frustrated cleaning, I suggest you take the iPad to a Genius Bar or an AASP for further examination of the device.
You can use this link to help you find a suitable location: Find Locations
Have a great day!
how do i cleqn the charging port on my ipad so it will charge? i have to blow it out or clean. it every day or two
