2020 Intel iMac: Low input from external microphones

Hey all, a friend and I record videos through OBS. The issue we are having is with any external microphone he uses with his 2020 Intel iMac (has the newest Tahoe update) has what seems to be a weak signal. We have tried a couple USB mic's and now using an XLR mic through an audio mixer but all with the same issue. He has the system Input volume at 100%, 100% in the Audio MIDI settings and his audio mixer is also maxed out. His levels average around -30 to -25db which doesn't make sense to me because all inputs are raised to the max. Obviously, the issue with all his gains maxed out, is it adds so much unwanted noise when I try to raise it in editing. He is only 6-10inches from the mic when speaking as well. I own an M1 Mac Mini which I tested the same Mic he's using on and had no issues and was able to set my input to about 40% sounding perfect. We eliminated OBS as the issue because his audio sounds the same in Discord and other programs as well. I've been looking for a fix for months now and nobody seems to have any answers or suggestions. Any help would be greatly appreciated.

iMac (2017 – 2020)

Posted on May 22, 2026 7:49 AM

Reply
Question marked as Top-ranking reply

Posted on May 22, 2026 9:03 AM

Have your friend disconnect the USB audio devices, then reset the 2020 iMac's SMC and NVRAM.

Reset the SMC of your Mac - Apple Support

Reset NVRAM on your Mac - Apple Support


If that doesn't help...?

Have your friend disconnect the USB audio devices and reset the 2020 iMac's Audio MIDI setup.

https://www.francoisgeorgy.ch/midi/how-to-reset-the-macos-midi-configuration/

3 replies
Question marked as Top-ranking reply

May 22, 2026 9:03 AM in response to Deetz23

Have your friend disconnect the USB audio devices, then reset the 2020 iMac's SMC and NVRAM.

Reset the SMC of your Mac - Apple Support

Reset NVRAM on your Mac - Apple Support


If that doesn't help...?

Have your friend disconnect the USB audio devices and reset the 2020 iMac's Audio MIDI setup.

https://www.francoisgeorgy.ch/midi/how-to-reset-the-macos-midi-configuration/

May 31, 2026 10:30 AM in response to den.thed

Thanks for the response. Unfortunately, none of those steps worked. I attached a sample audio file straight from him using the mic, all of his input levels are raised to the top which picks up the background noise you hear but his voice is still very quiet, only between -30 to -20dB. So, obviously raising that volume makes the background noise unbearable, which is the opposite of what a Dynamic mic is supposed to do, which is what he is using.


https://www.dropbox.com/scl/fi/pda52lbgoa3p6la3zl7ws/audio-test2.wav?rlkey=27c1uyagge8t1hoq1qhkzupkc&st=lxh7bhtz&dl=0

2020 Intel iMac: Low input from external microphones

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.