AirPods Pro 3 diagnostic check status before hearing test

Hi there,

Great question! Here's how to know when the AirPods Pro 3 diagnostic check is complete before running the hearing test:

How the diagnostic check works:

When you start a hearing test (via the Health app → Hearing → Hearing Test) or through the AirPods settings, iOS runs a short diagnostic check on your AirPods Pro 3 to confirm they are in the correct state for an accurate test. This typically checks:

- That both AirPods are properly in your ears (fit detection)

- That the ambient noise level is low enough for the test

- That audio output is functioning correctly

How to know when the diagnostic is complete:

1. On-screen status indicator: The Health app or the AirPods hearing test screen will display a progress indicator or a status message while the diagnostic runs. Once it's done, you'll see a prompt like "Ready to begin" or the test will automatically start.

2. Listen for a tone: The AirPods Pro 3 will play a short calibration tone in your ears during the diagnostic. Once the tones stop and you hear a confirmation chime or the test prompts you to respond, the diagnostic is complete.

3. Fit check confirmation: If the app asks you to confirm your AirPods fit is secure, that's part of the diagnostic. Once you confirm and the app accepts the fit, the diagnostic phase is done.

Tips for a smooth diagnostic and hearing test:

- Make sure you are in a quiet room (below 35 dB ambient noise is ideal).

- Wear the AirPods snugly — the test won't proceed if the fit detection fails.

- Keep your iPhone still and close to you during the test.

- Do not move or talk during the diagnostic check phase.

If the diagnostic seems to be stuck or looping, try removing and reinserting the AirPods, or restart your iPhone and try again.

Hope this helps you get a clean and accurate hearing test result!