How to connect iPhone 15 to Starlink Wi-Fi for remote communication during power outages?

Assuming your Starlink router is receiving power from a UPS or another suitable backup power source during the electricity outage.

Starlink specifically recommends disabling VPNs when troubleshooting connection to its router.  https://starlink.com/ng/support?srsltid=AfmBOopxirZP3gF16YQSYuT6L1NYwm0r3Ym_EAnNysMjfR965yyn90T4

You may try some of these steps. Please check after each step...

1. Sometimes, a simple restart can resolve temporary software glitches. Turn off your iPhone, wait for a few seconds, and then turn it back on.
   1. Restart the device. That's it.
   2. Still not solved --> Force restart iPhone - Apple Support
2. If you're using a VPN, disable it and check if the error goes away. Go to Settings > General > VPN & Device Management and turn off any active VPNs. Disabling a VPN only from the iPhone settings may not completely turn it off. To fully disable it, you need to switch it off from the VPN service provider’s app or remove the configuration profile they installed. Only then is the VPN truly off, which can help if it’s causing issues with cellular or Wi-Fi connectivity.
3. Reset Network Settings: Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings: Only network settings are removed.
   1. When you reset network settings, previously used networks and VPN settings that weren’t installed by a configuration profile or mobile device management (MDM) are removed. Wi-Fi is turned off and then back on, disconnecting you from any network you’re on. The Wi-Fi and Ask to Join Networks settings remain turned on.
   2. To remove VPN settings installed by a configuration profile, go to Settings > General > Profiles & Device Management, select the configuration profile, then tap Remove Profile. This also removes other settings and accounts provided by the profile. See Install or remove configuration profiles on iPhone in this guide.
   3. To remove network settings installed by MDM, go to Settings > General > Profiles & Device Management, select the management, then tap Remove Management. This also removes other settings and certificates provided by MDM. See “Mobile device management (MDM)” in the iOS Deployment Reference.
   4. Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you've used before.
   5. 
4. If the issue persists, you can try resetting all settings on your iPhone. This will not erase your data but will reset all personalized settings to their default values. Go to Settings > General > Transfer & Reset > Reset > Reset All Settings and confirm the action. Note that you will need to reconfigure your settings afterward. All settings—including network settings, the keyboard dictionary, the Home screen layout, location settings, privacy settings, and Apple Pay cards—are removed or reset to their defaults. No data or media are deleted.
   1. Reset All Settings: Return iPhone settings to their defaults - Apple Support:- Return iPhone settings to their defaults
   2. You can return settings to their defaults without erasing your content.
   3. If you want to save your settings, back up your iPhone before returning them to their defaults. For example, if you’re trying to solve a problem but returning settings to their defaults doesn’t help, you might want to restore your previous settings from a backup.
   4. 
5. Make sure you have the latest updates installed.
   1. Update Over-the-Air (OTA) —> Update your iPhone or iPad - Apple Support (IN)
   2. Update using iTunes/Finder —> Update your iPhone, iPad, or iPod touch - Apple Support (IN)

If none of the above steps resolve the issue, it is recommended to reach out to Apple Support or visit an authorized service center for further assistance. They can provide specific guidance based on your device model and iOS version.

Did you download and install the Starlink App from the App Store?

The app walks you through the setup. You need to be outside in a clear open area with an unobstructed view of the sky.

If you are still having difficulty, you need to contact Starlink Support. Sorry, but Apple cannot help with Starlink.

Starlink Help CenterStarlinkhttps://starlink.com › support

If things won't work with Starlink you might want to try Globalstar, which should work natively with the iPhone. My neighbor reports that it works very well in remote regions of the western states.

1. This is a user to user only forum, not Apple Support.
2. Starlink is not owned by Apple, so why you're asking only other users on this user to user only forum about something Apple has nothing to do with, doesn't make much sense.
3. Contact Starlink for help with their service.

BTW, a Starlink station does need Mains power as well.

To “run thru” any power outages you WILL need an alternate power source.

(UPS and/or generator)