G3 XPC750 tray load Motherboard circa 1999
hardware: 1999 G3 CRT iMac tray loader CD; processor= XPC750 PRX333SE; m board yr= "1998" no= 820-0980-A;
Ram on cpu board: Appple "MT 4Lsdt464HG-10cb1" + one 64MB in foxcon slots; Motherboard Ram slot= Samsung KMM965G512BQN-GO
Hello all, I have inherited two G3 CRT iMacs. This post is regarding the tray loader.
Question: All I have left of this iMac is the cage with all boards, the CD tray, video port board and orig 6GB HD.Can I build a small net box computer from this by adding a power supply and LCD monitor or is this scrap? On the modem side of the board there is a cigarette pack size box that plugs in to the mb near the modem. It has a two row sock 2 x 12 pins. I assume that this is the power entry point. Thanks for the advice.
Ram on cpu board: Appple "MT 4Lsdt464HG-10cb1" + one 64MB in foxcon slots; Motherboard Ram slot= Samsung KMM965G512BQN-GO
Hello all, I have inherited two G3 CRT iMacs. This post is regarding the tray loader.
Question: All I have left of this iMac is the cage with all boards, the CD tray, video port board and orig 6GB HD.Can I build a small net box computer from this by adding a power supply and LCD monitor or is this scrap? On the modem side of the board there is a cigarette pack size box that plugs in to the mb near the modem. It has a two row sock 2 x 12 pins. I assume that this is the power entry point. Thanks for the advice.
iMac G3 CRT slot and tray models, Mac OS X (10.2.x), m board yr=1998 no= 820-0980-A
