-
All replies
-
Helpful answers
-
Oct 12, 2011 8:48 AM in response to dhwaltby dhwalt,Re. Moskovit and SleepWatcher 2.2
This line has picked up a blank space in compatibilit y:
sudo cp ~/Desktop/sleepwatcher_2.2/config/de.bernhard-baehr.sleepwatcher-20compatibilit y.plist /Library/LaunchDaemons/de.bernhard-baehr.sleepwatcher.plist
Take care that other lines may have picked up blank spaces in odd places! I am unable to edit out the added blank space character.
All the lines starting sudo should be single, rather than wrapped, for Terminal.
Apologies Dave
-
Oct 12, 2011 1:09 PM in response to dhwaltby moskovit,Good news (hopefully):
Mac OS 10.7.2 (just released) may solve many of our wi-fi problems. The release notes say this:
"Address an issue that may cause a delay in accessing the network after waking from sleep."
Post here whether the update solves your problems, please, so we can see how successful it is.
(Dhwalt: Thanks for your suggestions re solving this problem via Terminal. I'm hoping that the update will solve my problems, but if it doesn't, perhaps I'll give your suggestions a try.)
-
Oct 13, 2011 4:40 AM in response to moskovitby nipper123,Well Guys, this board has been VERY quiet after the 10.7.2 (11C74) release. Did it fix your bug or is Lupunus right and there is no bug—just a few hundred thousand messed up routers?
-
Oct 13, 2011 4:59 AM in response to moskovitby dhwalt,Thank you Apple.
Now back to Snow Leopard performance for WiFi connection on wakeup from sleep. OK, only installed and ran the large Combo Update for 4 hours but so far no WiFi failures. Normal service has been resumed - we hope!
Next question, "Why can't I use iCloud"? - Coming to the UK soon says Apple.
-
Oct 13, 2011 5:54 AM in response to dhwaltby ChristianMoehler,In my case 10.7.2 doesn't solve the problem.
After wakeup the MacBook Air doesn't automatically connect with Wifi.
It only works if I disable bluetooth - still like in 10.7.1.
But I have to say I have installed 10.7.2 on the normal way.
I have not installed the combo update.
I am afraid that a Combo-Update can slow down the Air - like it was by installing 10.6.7.
https://discussions.apple.com/thread/3033131?start=0&tstart=0
http://forums.macrumors.com/showthread.php?t=1122278
I am not sure if I should install the combo-update instead of the "normal" update ???
-
Oct 13, 2011 6:19 AM in response to lrogersinlvby teruaki,I have updated to 10.7.2 and ios5 on iphone and ipad2, but my conection is still no working! So I can't share my internet conection from iMac to mobiles...
-
Oct 13, 2011 6:40 AM in response to moskovitby Lily1000,I had no wifi problems till 10.7.2! I know its not my network, my other computers and iphone are having no connection problems. And it was fine before the 10.7.2 update........7 month old iMac and now it wont be allowed to sleep!
-
Oct 13, 2011 7:23 AM in response to robertoneby gokku3,robertone wrote:
Ciao.
Io ho usato questo post presente a pagina 56 di questo thread da parte di Robygen ed ha funzionato.
si tratta di un work-aroud, ma per il momento (modifica fatta un paio di settimane fa) funziona.
Roberto
==========================
Here is a guide (in italian...but I think you can easily translate it)
http://miaplacidusedaltriracconti.blogspot.com/2011/08/problemi-wifi-con-os-x-li on-la.html
It's similar to the guide posted by Jester. Kext utility makes the backup of lion's 80211 kext by itself.
I know this is not THE solution.
But it's A solution.
==========================
my firmware version: Atheros 9380 4.0.58.4-P2P (Lion 10.7.2)
I followed the instructions but after reboot there was no wi-fi functionality at all: the OS wouldn't find any wi-fi card.
So I reinstalled the backup 10.7.2 kext file, reboot and everything was back to normal (which means I'm still unable to get a stable connection).
Is there a reason why replacing the 10.7.2 kext file with the 10.6.4 one doesen't work for me? It' so strange. After reboot, it's like the OS doesn't see any wifi hardware installed...
Should I try using other kext file instead of the 10.6.4 one? Maybe with 10.6.5 or 10.6.6 it'll work...
I remember the first time I boot my brand new imac everything was working fine. but after upgrading to a newer version of snow leopard things just kinda went south. Then Lion just made things worse...
-
Oct 13, 2011 7:42 AM in response to lrogersinlvby Yecc,My Wifi constantly drop. I'm so tired with this ******* Lion
-
Oct 13, 2011 7:45 AM in response to robertoneby ryyjma from san fedele intelvi,Ciao, Roberto.
Ho aspettato con circospezione la 10.7.2 e dopo averla scaricata, il problema rimane: il wi-fi non funziona, si scollega senza motivi apparenti sul mio IMac mentre continua a funzionare egregiamente sul mio Mac Book...sono demoralizzato...non so più cosa fare....mi scoccia enormemente..forse noi maccanici pensavamo di non incorrere nei problemi dei PC...invece...no!
A 'sto punto sto pensando di soprassedere all'acquisto dell'IPhone 4s....con quello che costa/costerà, chi me lo fa fare di rischiare?
Evidentemente queste 70 e rotte pagine dell'Apple support communities, non servono a nulla....se nessuno di Apple si preoccupa!
Buona giornata!
Hello, Robert.
I waited cautiously to 10.7.2 and after downloading it, the problem remains: the wi-fi does not work,you disconnect for no apparent reason on my iMac as it continues to work well on my Mac Book ...do not be demoralized ... I know what to do .... it annoys me greatly Maccanico .. maybe we thought we would avoid the problems of the PC ... but ... no!
A 'point I'm thinking to postpone the purchase of the iPhone 4s .... with what costs / cost, why should I bother to risk it?
Obviously, these 70 routes, and the Apple support pages communities, to no avail .... if no onecares about Apple!
Good day! -
by hormelmeatcompany,Oct 13, 2011 8:09 AM in response to ryyjma from san fedele intelvi
hormelmeatcompany
Oct 13, 2011 8:09 AM
in response to ryyjma from san fedele intelvi
Level 1 (0 points)
For those who are having problems rejoining after waking from sleep:
Open Console.app in /Applications/Utilities. Do you see something similar to this line?:
configd: subnet_route: write routing socket failed, Network is unreachable
-
Oct 13, 2011 8:44 AM in response to hormelmeatcompanyby Lily1000,Nope.
I got this though...
13/10/2011 14:15:56.748 airportd: _doAutoJoin: Already associated to “getyourownwifichannel”. Bailing on auto-join.
found a similar post on macrumours - no solution yet
-
by ryyjma from san fedele intelvi,Oct 13, 2011 8:53 AM in response to hormelmeatcompany
ryyjma from san fedele intelvi
Oct 13, 2011 8:53 AM
in response to hormelmeatcompany
Level 1 (0 points)
-
by robertone,Oct 13, 2011 8:59 AM in response to ryyjma from san fedele intelvi
robertone
Oct 13, 2011 8:59 AM
in response to ryyjma from san fedele intelvi
Level 1 (5 points)
DesktopsHi Ryyjama.
Really I'm bit disappointed.
Yesterday evening, I have installed 10.7.2 and... the wi-fi start to be dropped every 3-4 minutes.
so I connect my iMac with the cable to continue to work.
Now I have checked the firmware: it was updated by 10.7.2 to "Versione firmware: Atheros 9280: 4.0.58.4-P2P"
So some minutes ago I have re-applied the work around on page 56.
Now it works and my firmware is back to "Versione firmware: Atheros 9280: 2.1.9.8.1".
Ony one notes: I have performed the procedure two times: the first time the Firmware version was not changed. It could be my fault the first time or... another strange surprise of Lion.
So it seems to me that the problem is connected to a plenty of possible reasons and each case has a specific solution or... work around.
Still waiting for some signal from Apple
BR
Roberto
-
Oct 13, 2011 9:02 AM in response to Lily1000by Lily1000,Just to add, more searching around lead me to another post on these forums, and it has worked for me - at least for the time being although will test it out more later. Thanks to Triddick for passing it on....... Just to reiterate, it was not a problem till 10.7.2, no idea why though.
"I read a link posted in this forum to remove all locations apart from your wifi, disable airport and then remove the following file:
/Macintosh HD/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
Then enable airport and connect to your wifi network. This creates the file again but has no left over residue from snow leopard.
This has worked for me and it is working fine now, just wanted to let you know what worked for me and say thanks to the person who posted the link.
Thanks"
