Currently Being ModeratedJul 21, 2011 7:31 AM (in response to prolink)
I´ve the same problem, what I saw in Google is, waiting for Lion driver by Xerox or change Printer. I knew thats bad, but no good news, because rosetta is dead under Lion...
I will change Printer
Currently Being ModeratedJul 25, 2011 4:27 AM (in response to prolink)
Had the same "failed" error. I re-installed the printer and instead of using the default driver I changed it to "Phaser 6110MFP" under Options & Supplies and Driver. Worked flawless now. I own the non-multifunction printer (Phaser 6110).
Currently Being ModeratedJul 25, 2011 9:31 AM (in response to ivc)
ivc, this is working perfect
I can't select correct answer for your post because i messed up before but for ANYONE reading this thread then ivc has 100% found the fix.
Well done mate, your a star
Currently Being ModeratedJul 31, 2011 3:19 AM (in response to prolink)
I have this printer on my network using Airport Extreme. The xerox driver did not work because it was written with Rosetta. I installed printer and using other driver option used Samsung CLP 300 (Xerox is actually Samsung with xerox Toner cartridges) using the following link
And it works fine
Hope this helps
Currently Being ModeratedAug 1, 2011 4:51 AM (in response to ivc)
Just a note, because for me it wasn't obvious:
You need to download anew the drivers for Phaser 6110MFP from the Xerox website , item Mac OS X 10.6 Print Installer
Do not select any drivers from the list from Preferences yet.
After you have installed the drivers, THEN select the printer from the list in Preferences.
Btw, Samsung CLP 300 drivers work just fine.
Currently Being ModeratedSep 12, 2011 2:30 AM (in response to prolink)
I have the xerox phaser 8560:
I also installed Lion at work here;
everything was working fine with the 1.2 driver under snow leopard.
After the lion install, pressing the print button didnt do anything (paused).
I then downloaded and installed the new xerox lion driver (2.09) which at the end of the installation process asks me to locate my printer which i did using its IP address.
Now, trying to print, it doesnt pause anymore, the print job does proceed to the queue, but i get the error 'printer out of ink', which is definately not the case as it printed fine under snow leopard.
Anyone know a solution/workaround for this?
Thanks in advance!!!