Changing motherboards in a 1.25ghz emac

is it possible to put a 1.42 ghz emac motherboard into a 1.25 ghz emac???

eMac 1.25ghz-OTHER

Posted on Sep 19, 2011 6:44 PM

Reply
7 replies

Sep 19, 2011 9:01 PM in response to Tim Reisinger

There were a lot of 1.25G eMac taht had a terrible logic board defect. It was once covered with an extended repair program ut it expired over two years ago.


A new logic bard can be very expensive/ If you live within driving distance of Eugene, Oregon there is a cost effective option there. Their replacement LBs are pricey:


http://www.synaptech.com/catalog/index.php?main_page=product_info&cPath=16_7_58& products_id=29&zenid=59ed774c64e3494592f4804daaf0b50c


but they have a service that repairs the existing 1.25G LB instead of replacing it. Used to be around US$130.

Sep 20, 2011 6:39 AM in response to Tim Reisinger

After doing some more investigation of this "new" emac, I put the old working HD back in and everything is working ok with that HD, but I am still unable to boot from a start up disk, I get a Kernal panic message. The only thing I can think of is the disk drive is bad?? but I can put a CD in and it works fine, but could it be that it can't read a DVD, it does have a Combo drive. Can that one part of the drive go bad where it just won't read a DVD?? I've got a Superdrive in my other emac, but I would hate to pull it if it still goes back to something on the board?? Any thoughts on this problem.


On a side note I am going to try using Superduper to load the info from the old emac to the 500gb hd. I tried going through the OS install process, but it wouldn't let me install on to the externalHD. I did reformat the hd to mac extended, but not journaled, does that make a difference??

Sep 20, 2011 8:30 AM in response to Tim Reisinger

Can that one part of the drive go bad where it just won't read a DVD??


Not unheard of, especailly if the drive uses separate lenses for CDs and DVDs.


Before ripping things open to swap optical drives, get a drive cleaning disk. They are US$5-15 at most electronics and office stores that carry computer stuff.


A lot of drives pronounced DOA by service providers are simply dirty and respond well to a cleaner disk.


A friend has an older MacBook Pro and its SuperDrive failed and he was told by the local AASP that he needed to replace the drive--estimated at US$140-150 for parts and labor. I loaned the guy my cleaning disk and the drive is now working properly.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Changing motherboards in a 1.25ghz emac

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.