Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Unable to Create Windows 7 Install Disk

Trying to get Windows 7 up and running on my 2010 MBP. After downloading the Windows 7 .iso and inserting my 4 GB flash drive (which should be large enough), I open up Boot Camp only to see that the option for "Create a Windows 7 Install Disk" is grayed out.


I don't have any DVDs on me, and I don't really feel like wasting gas going out and buying a pack of them just for this while I have a perfectly functional USB flash drive on hand.

MacBook Pro, Mac OS X (10.7.2)

Posted on Oct 25, 2011 6:44 PM

Reply
87 replies

Oct 27, 2011 11:13 AM in response to knotwrite

I am having the same issue with a Windows 7 installation with Boodcamp. Since the 10.7.2 update, the BCA has changed, combining the partitioning and installation into one step. It won't recognize my ISO disk as a valid installer disk, so Applecare Support recommended creating a Flashdrive install disk... but that option is greyed out. I have found no way to get access to that option.


My opinion is they broke the BCA trying to make it more user friendly. It worked fine for me in the initial 10.7 build and in 10.7.1. Now it is basically unusable (for me).


If anyone knows how to get this opened up, I'd really appreciate it.


Thanks...


Alan

Oct 27, 2011 12:27 PM in response to kermit4161

Just an update from Apple Support... it'll depend on the model of computer you have whether or not the USB Flashdrive boot option will be available. If the computer doesn't support booting from a USB drive, then the option wont be available. The tech helping me out is going to get me a list of computers supported. I'm not sure this is the whole answer though as the laptop I'm working on is a brand new MBP.. so we'll see. I'll post the list when I get it.

Oct 31, 2011 2:41 PM in response to Fortuny

I have a iMac 2.8 Ghz Intel Core 2 Duo with Mac OS X Version 10.6.8.


I also have a USB drive formated as Master Boot Record in MS-DOS (FAT) format. The USB has a capacity of 4GB+ and for now only includes a file named 'unattend.xml' and a folder named 'drivers'. I created this USB drive when advised by a Boot Camp support site, because the Windows 7 install created a blank screen with a small flashing line on the upper-left of the screen.


The I have burned an ISO file of Windows 7 Pro English 32 bit from the Microsoft site (I'm Gold partner).


So I started of by clicking on the Boot Camp Assistant, tried to download the nesecarry Windows drivers, but it refused... This seemed to be a normal problem which I could ignore (I heard). So I selected 'I have the Max OS X Installation Disc....' and pressed continue. I now prepared the size of the Windows environment and when that was finished, I inserted the burned DVD (which works perfectly fine on non-Apple computers).


All this time, the USB drive was in the back of the iMac.

I waited a while and the computer rebooted. A white screen appeared and after a while, the screen went to black, with the flashing little line on the upper-left of the screen...


What is it that I do wrong? Any help is really appreaciated.

Nov 11, 2011 8:24 AM in response to knotwrite

I have figured out a way to enable this option. This is only what worked in my instance. I will try to do a quick tutorial here.

Open Utilities(or where ever the boot camp assistant.app is at.) Hold Ctrl key and click Boot camp Assistant.app, The second option on the pop up menu will be Show Package Contents. Click that, then open Contents folder, then open the info.plist file with the property viewer. Scroll down to USBBootSupportedModels, open that listing and look at each item. By default you should have:


IM130, MM50, MP60, MB80, MBP90, MBA40


Heres what I did. I brought up my system information and looked for the Model Identifier, Mine is MacBook2,1. Based off how the above numbers are based, I put 2 and 2 together. I added a child string to the list in the info.plist file and typed in MB21(this will vary based on your Model Identifier). I had to save the info.plist file to another location(apparently it wont let you save to the one in the .app). I then renamed the original info.plist file in the Boot Camp Assistant.app Contents folder to info.plist.old(just to preserve the old file), then took the new edited file and dropped it into the Contents folder along with the info.plist.old file and everything else in there. Once thats done, you just back out to the Utilities folder and open Boot Camp Assistant. If everything went properly, you should have the option now checkable, if something went wrong, you probably didn't decipher the Model Identifier properly.


I have not attempted an install just yet, I will be trying this in the next few hours. For the record my Macbook is the black Macbook Mid 2007 model. I will update this thread once I try this process and see if my macbook will boot off usb properly.

Nov 11, 2011 1:01 PM in response to xxcrashxx

it appears that my model macbook does not support usb booting. after changing over the files, it did error trying to copy over the windows files, not sure why. after a reboot the process went through completely. on the reboot i got the apple symbol, then it would flash between the apple symbol, the circle with the line, and the folder with the question mark and would continue until powering off. but it did successfully create the usb drive. im guessing they disable the setting for systems that dont support usb booting??

Nov 24, 2011 8:24 PM in response to cfxram

In reference to the radio for Create a Windows 7 Install Disk being unavailable on the Macbook Pro.


Thank you for your input cfxram. After looking up what you did I was able to successfully create a windows 7 install disk on my 2010 macbook pro. For anyone who fumbled with this as I did, here are the exact instructions to fix the problem.


1. Open Applications > Utilities > Boot Camp. Right click Show Package Contents. Click Contents. Double click Info.plist and it should open up as "Info.plist - Locked".


2. Scroll down to the list of strings under <key>DARequiredROMVersions</key>. It should have a list that looks like this:

</array>

<string>IM41.0055.B08</string>

<string>IM42.0071.B03</string>

<string>IM51.0090.B03</string>

<string>IM52.0090.B03</string>

<string>IM61.0093.B01</string>

<string>MP11.005C.B04</string>

<string>MB11.0061.B03</string>

<string>MBP11.0055.B08</string>

<string>MBP12.0061.B03</string>

</array>


3. Copy and paste the last string in the list so that there is a duplicate at the end. A dialogue will come up saying "You don’t have permission to write to the folder that the file “Info.plist” is in.". Click "Duplicate" and it will open up in a seperate file named "Info". Your new file should have a string like this:

<array>

<string>IM41.0055.B08</string>

<string>IM42.0071.B03</string>

<string>IM51.0090.B03</string>

<string>IM52.0090.B03</string>

<string>IM61.0093.B01</string>

<string>MP11.005C.B04</string>

<string>MB11.0061.B03</string>

<string>MBP11.0055.B08</string>

<string>MBP12.0061.B03</string>

<string>MBP12.0061.B03</string>

</array>


4. Open Applications > Utilities > System Information. Under Hardware Overview there will be a Boot ROM Version. Mine was MBP71.0039.B0B. Copy this and paste it into the duplicate string you created at the end. It should look like this:

<array>

<string>IM41.0055.B08</string>

<string>IM42.0071.B03</string>

<string>IM51.0090.B03</string>

<string>IM52.0090.B03</string>

<string>IM61.0093.B01</string>

<string>MP11.005C.B04</string>

<string>MB11.0061.B03</string>

<string>MBP11.0055.B08</string>

<string>MBP12.0061.B03</string>

<string>MBP71.0039.B0B</string>

</array>


5. Scroll down to the list of strings under <key>USBBootSupportedModels</key>. Duplicate the last string the same as Step 3 and you should have something like this:

<array>

<string>IM130</string>

<string>MM50</string>

<string>MP60</string>

<string>MB80</string>

<string>MBP90</string>

<string>MBP90</string>

</array>


6. In System Information, copy the first part of the Boot ROM Version. Mine was MBP71. Paste this into the duplicate string at the end and you will have something like this:

<array>

<string>IM130</string>

<string>MM50</string>

<string>MP60</string>

<string>MB80</string>

<string>MBP90</string>

<string>MBP71</string>

</array>


7. Go to File > Save... and it will bring up a dialogue to save your new file. The default file name will be Info.txt. Change the extension so it reads Info.plist and click Save. A dialogue will come up "You have used the extension “.plist” at the end of the name. The standard extension is “.txt”." Click "Use .plist".


8. Go back into the original Info.plist folder from Step 1 and rename it as Info.plist.old. Drag the new Info.plist file from your desktop into the Contents folder.


9. Open up Boot Camp Assistant when you click through the menus, the radio to Create a Windows 7 Install Disk should be available now. Enjoy!

Unable to Create Windows 7 Install Disk

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.