ISDN and iMac Terminal Adapter

Question

Level 1

9 points

ISDN and iMac Terminal Adapter

I have just purchased an iMac G5 (20 inch) and also a Hayes ISDN USB Terminal Adapter to get connected to the internet.

I have installed the TA software but when I connect the TA the iMac does not seem to pick up the hardware. I get a diagnostic message that USB interface has failed.

I have tried a couple of things:

different USB port(each port is working with other devices)
different USB cable (that was working on other devices)

I have also connected the TA using the same cable to a Windows machine and it was recognised straight away.

Anybody that can advise I would really appreciate it - by the way I am a new Mac convertee from Windows so not that familiar yet with the OS.

Thanks
tonymul

iMac G5 Mac OS X (10.1.x)

iMac G5, Mac OS X (10.1.x)

Posted on Feb 6, 2006 9:40 AM

Reply

Answer 1

varjak paw

Level 10

182,668 points

Feb 6, 2006 11:41 AM in response to tonymul

I'd suggest you try asking in the iMac G5 area. This forum is for the new Intel-based iMac and so perhaps not the most likely place for you to get a quick and accurate response.

Good luck.

Oh, and BTW, you'll want to change your profile to correctly reflect the version of Mac OS X your system is running. The iMac G5s do not and cannot run Mac OS X 10.1.

Reply