Julius.J
Level 1
(0 points)
Q: Help Clients / MDCs can't connect after disableing/enable
Help!
I removed a computer form the san and did a fresh OSX install on its drive. When I went to re add it to the san it adds but the volume doesn't mount and in xsan admin is says fsmpm is not running. If i disable and and enable the san on the client I get an error saying "Failed to load volume list."
Here is the console code:
| Code: |
| 4/2/12 12:27:18.692 AM fsmpm: PortMapper: CVFS Volume PA06____________________________ on device: /dev/rdisk5 (blk 0xe00000d raw 0xe00000d) con: 2 lun: 0 state: 0xf4 inquiry [LaCie 12big fibre2 ] controller # 'default' serial # '60CC10A000300CBE0000000000000000' Size: 15466199007 Sector Size: 512 4/2/12 12:27:18.692 AM fsmpm: PortMapper: CVFS Volume PROJECT2________________________ on device: /dev/rdisk10 (blk 0xe000012 raw 0xe000012) con: 2 lun: 0 state: 0xf4 inquiry [LaCie 12big fibre ] controller # 'default' serial # '60050CC000610D25000000000000002C' Size: 15470106591 Sector Size: 512 4/2/12 12:27:18.692 AM fsmpm: PortMapper: CVFS Volume PA04____________________________ on device: /dev/rdisk3 (blk 0xe00000b raw 0xe00000b) con: 2 lun: 0 state: 0xf4 inquiry [LaCie 12big fibre2 ] controller # 'default' serial # '60CC10A000300CCD0000000000000000' Size: 15466199007 Sector Size: 512 4/2/12 12:27:18.692 AM fsmpm: PortMapper: CVFS Volume MD1_____________________________ on device: /dev/rdisk7 (blk 0xe00000f raw 0xe00000f) con: 2 lun: 0 state: 0xf4 inquiry [LaCie 12big fibre ] controller # 'default' serial # '60050CC000610E9000000000000000A0' Size: 1932281823 Sector Size: 512 4/2/12 12:27:18.692 AM fsmpm: PortMapper: CVFS Volume PROJECT3________________________ on device: /dev/rdisk11 (blk 0xe000013 raw 0xe000013) con: 2 lun: 1 state: 0xf4 inquiry [LaCie 12big fibre ] controller # 'default' serial # '60050CC000610D25000000000000002D' Size: 15470106591 Sector Size: 512 4/2/12 12:27:18.692 AM fsmpm: PortMapper: CVFS Volume PA05____________________________ on device: /dev/rdisk4 (blk 0xe00000c raw 0xe00000c) con: 2 lun: 1 state: 0xf4 inquiry [LaCie 12big fibre2 ] controller # 'default' serial # '60CC10A000300CCD0000000000000001' Size: 15466199007 Sector Size: 512 4/2/12 12:27:18.692 AM fsmpm: PortMapper: CVFS Volume PA07____________________________ on device: /dev/rdisk6 (blk 0xe00000e raw 0xe00000e) con: 2 lun: 1 state: 0xf4 inquiry [LaCie 12big fibre2 ] controller # 'default' serial # '60CC10A000300CBE0000000000000001' Size: 15466199007 Sector Size: 512 4/2/12 12:27:18.692 AM fsmpm: PortMapper: CVFS Volume RENDER1_________________________ on device: /dev/rdisk8 (blk 0xe000010 raw 0xe000010) con: 2 lun: 1 state: 0xf4 inquiry [LaCie 12big fibre ] controller # 'default' serial # '60050CC000610E9000000000000000A1' Size: 3862775104 Sector Size: 512 4/2/12 12:27:18.692 AM fsmpm: PortMapper: CVFS Volume PROJECT1________________________ on device: /dev/rdisk9 (blk 0xe000011 raw 0xe000011) con: 2 lun: 2 state: 0xf4 inquiry [LaCie 12big fibre ] controller # 'default' serial # '60050CC000610E9000000000000000A2' Size: 15470106591 Sector Size: 512 4/2/12 12:27:18.695 AM fsmpm: GetCctlsFromNss failed: [errno 54]: Connection reset by peer 4/2/12 12:27:18.695 AM fsmpm: PortMapper: central control init failed! 4/2/12 12:27:19.000 AM kernel: Xsan Client Revision 3.5.0 Build 7443 Branch (457.4) Built for Darwin 11.0 x86_64 Created on Wed Sep 21 17:01:26 PDT 2011 4/2/12 12:27:19.406 AM xsand: fsmpm exited unexpectedly (exit code = 1) 4/2/12 12:27:19.418 AM xsand: fsm shutdown after 0 seconds 4/2/12 12:27:19.443 AM com.apple.launchd: (com.apple.xsan[675]) Exited with code: 1 4/2/12 12:27:19.443 AM System Preferences: ERROR: -[XsandCommandAction doXsandManagementRpcWithCommand:]: unexpected EOF reading reply 4/2/12 12:27:19.443 AM System Preferences: ERROR: -[XsandCommandAction startExecution]: unable to send 'list' message to xsand |
and on the MDC
| Code: |
| 4/2/12 12:47:59.171 AM fsmpm: PortMapper: new_input authentication protocol error(39)... 4/2/12 12:48:26.177 AM servermgrd: xsan: [376/DA325E20] ERROR: get_clients_for_fsmvol_named(SANSBox): Could not find FS. Perhaps it just started up? 4/2/12 12:48:38.391 AM fsmpm: PortMapper: new_input authentication protocol error(39)... 4/2/12 12:48:44.704 AM fsmpm: PortMapper: new_input authentication protocol error(39)... |
I can't figure out why the fsmpm is exiting
4/2/12 12:27:19.406 AM xsand: fsmpm exited unexpectedly (exit code = 1)
Please help! I could use some suggestions. I've tried a lot, but with not much luck.
Julius.J
Level 1
(0 points)
Grim hope in the darkness.
I found a bunch of files with the wrong permission on my MDC01 in /private by tracking down a prosgate log issue. After manually fixing the permission things are looking up. I've gotten a new client to mount! I think I have had enough fun though I plan to backup the xsan config files and wipe both MDC's and restore the configs to see if life returns to normal.
I have a few new questions though!
What is the proper procedure for running cvfsck? I've seen many a post on this, but I'd like a refresher if anyone can point me in the right direction!
Also does anyone know if there is anything else I need to copy other then the xsan config files to get it up and running on a clean server install?
