I installed 10.7.4 on my MacPro. It rebooted just fine. No internet connection. Hmmm....check my WiFi connection and it states "No WiFi Hardware found" *** is up with that? Shutdown, waited a couple of minutes and restarted. Now nothing but a gray screen and no CD eject. Nothing. A little help would be nice.
Mac Pro, Other OS, 10.7.4
Paste your kernel.log contents here right after a reboot. Might help point out whats wrong.
Me thinks my Radeon X1900 died. Myscreen is not gray, but blank. The power light comes on, but no picture. I hear the start-up chimes, but no video.
If you do get a chance to log in and can see the screen, then the logs will help explain what's going on
SMC and PRAM reset did nothing. I'm really not sure what's going on. I have sharing on my MacPro and it's not showing up on my iMac or MBAir? Could this be something besides the video card?
Shut down computer. Restart holding Command+R simultaneously. Run disk utility to repair disk. You may as well Repair Permissipns as well.
That didn't help. The monitor is blank, so I can't tell what it's doing.
After install of 10.7.4 update, the screen is like..moved down!!!...there´s a black gap on top between the menu bar and the edge of the screen!!!!!!!!!!!....PLEASE APPLE...DON´T GET WINDOWSY.....!!!!!!
Well, I'd put it in TDM and connect to another computer via FireWire and run repairs from there.
Tried the TDM and it only showed my 500GB spare storage drive, not my RAID HD. I'm pretty much stumped.
You are making this very difficult. You need to mention things like you're booting from a RAID.
So, how was the RAID created, a card, Disk Utility, SoftRAID? Is it a Mirror or a Stripe?
Sorry, don't mean to complicate things. It is a mirrored RAID created on DIsk Uitlity.
Well, you need to resolve the video issue, then you need to boot the machine from something else, either the recovery partition or an external.
That's the bad thing about the RAID. No recovery partition. Is there a replacement for the X1900 Radeon?
I would check with -
www.macsales.com
10.7.4 issues
