Hi all!
This morning my Iphone was out of battery, so I recharged it. But foud out it could not detect my SIM, it did not ask for the SIM code, nor detected its removal when I pulled it out. All the other functions were working good.
But the problems really started when I tried to restore my Iphone. Everything just went normal, until it failed, with Itunes giving error code -1.
What to do now?
With kind regards,
Floris237
iPhone 4S, iOS 5.1.1
That error indicates a hardware issue. I would take it to Apple and see if they can determine the issue.
That error indicates a hardware issue. I would take it to Apple and see if they can determine the issue.
It is indeed a hardware issue. Fourth guy for this month with this same problem in this forum after updating to 5.1.1. Out of all the odd questions, can I ask whether your 4S is a black or a white and the capacity of your model. And just to narrow things down, your carrier and your country. I'm gonna start a proper research on this now.
And BTW, take to Apple, you get a new phone! 🙂
Just to make sure they don't turn you down when you go to the Genuis Bar, remove your sim and do a full restore, after it fails, open up Console and look for the iPhone Updater logs and post the part related to "bbupdater" over here. I will check and see if its the same issue. <= These are instructions for a Mac. For windows, hit the Windows+R keys on your keyboard and paste ""%AppData%\Apple Computer\iPhone Updater Logs\" and open up the log file in that folder.
Damm, I was hoping it was just a software issue..
Of course, my iphone is a 4s, black, 64gb, my carrier is T-mobile and my country of orign is the Netherlands.
The log file was located in AppData\roaming\Apple Computer\iTunes\iPhone Updater Logs\ just for the next time, it will save some search time. In the log file there were two parts starting with bbupdater, which were separeted by some other log files. I hope it will help!
The first part of bbupdater:
bbupdater: BEGIN: Querying info at stage first
bbupdater: BEGIN: Preparing first stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 5...bbupdater: OK
bbupdater: END: Preparing first stage
bbupdater: Connecting to Loader...bbupdater: OK
bbupdater: Getting Version...bbupdater: OK
bbupdater: Loader version: PBL-DownloaderVER1.0
bbupdater: Fusing disallowed, will treat as fused
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x1d5879e0 [0x351650]>{type = mutable dict, count = 4,
entries =>
2 : <CFString 0x1a3e70 [0x351650]>{contents = "VendorID"} = <CFNumber 0x1d5850d0 [0x351650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1a3110 [0x351650]>{contents = "ChipID"} = <CFNumber 0x1d587990 [0x351650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x1a3e60 [0x351650]>{contents = "CertID"} = <CFNumber 0x1e880190 [0x351650]>{value = +2, type = kCFNumberSInt32Type}
6 : <CFString 0x1a3d10 [0x351650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (123743 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: Loading...
bbupdater: 0x2001a100 of 0x2002fe98 (26 percent)
bbupdater: 0x20022200 of 0x2002fe98 (53 percent)
bbupdater: 0x2002a300 of 0x2002fe98 (80 percent)
bbupdater: 0x2002fe98 of 0x2002fe98 (100 percent)
bbupdater:
bbupdater: Launching...bbupdater: OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: BEGIN: Preparing Second stage
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: END: Preparing Second stage
bbupdater: BEGIN: Gathering Personalization parameters...
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 0
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: NONCE: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
bbupdater: SNUM: 0x22CF2DE3
bbupdater: CHIPID: 0x005a00e1
bbupdater: END: Gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x1d5879e0 [0x351650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1a3e70 [0x351650]>{contents = "VendorID"} = <CFNumber 0x1d5850d0 [0x351650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1a3110 [0x351650]>{contents = "ChipID"} = <CFNumber 0x1e886bc0 [0x351650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x1a3e60 [0x351650]>{contents = "CertID"} = <CFNumber 0x1e880190 [0x351650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x1a3d40 [0x351650]>{contents = "Nonce"} = <CFData 0x1e886ac0 [0x351650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x1a3d10 [0x351650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Resuming Maverick Protocol
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: e3 e1 a8 4e 5e 33 2c 3e 43f2 16 a8 1f 4c f0 bc 50 89 2d 49
bbupdater: OSBL_HASH: bc 9f 2f 3e 6d b8 c6 93 05eb 6a f4 d9 a5 24 9a e0 f2 ec 1d
bbupdater: AMSS_HASH: 97 75 d6 e1 91 80 e7 ba 8dda 74 76 8f 14 b1 d6 d9 32 75 b7
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Saving personalized image to /mnt1/usr/standalone/firmware
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 5...bbupdater: OK
bbupdater: Modem not booting
bbupdater: END: Preparing Initial stage
bbupdater: END: Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage first
bbupdater: BEGIN: Preparing first stage
bbupdater: END: Preparing first stage
bbupdater: Connecting to Loader...bbupdater: OK
bbupdater: Getting Version...bbupdater: OK
bbupdater: Loader version: PBL-DownloaderVER1.0
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x1d5879e0 [0x351650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1a3e70 [0x351650]>{contents = "VendorID"} = <CFNumber 0x1d5850d0 [0x351650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1a3110 [0x351650]>{contents = "ChipID"} = <CFNumber 0x1e886ff0 [0x351650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x1a3e60 [0x351650]>{contents = "CertID"} = <CFNumber 0x1e880190 [0x351650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x1a3d40 [0x351650]>{contents = "Nonce"} = <CFData 0x1e886ac0 [0x351650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x1a3d10 [0x351650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: Loading...
bbupdater: 0x2001a100 of 0x2002ffa4 (26 percent)
bbupdater: 0x20022200 of 0x2002ffa4 (53 percent)
bbupdater: 0x2002a300 of 0x2002ffa4 (80 percent)
bbupdater: 0x2002ffa4 of 0x2002ffa4 (100 percent)
bbupdater:
bbupdater: Launching...bbupdater: OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: BEGIN: Preparing Second stage
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: END: Preparing Second stage
bbupdater: Not in restore mode - skipping gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x1d5879e0 [0x351650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1a3e70 [0x351650]>{contents = "VendorID"} = <CFNumber 0x1d5850d0 [0x351650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1a3110 [0x351650]>{contents = "ChipID"} = <CFNumber 0x1e886ff0 [0x351650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x1a3e60 [0x351650]>{contents = "CertID"} = <CFNumber 0x1e880190 [0x351650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x1a3d40 [0x351650]>{contents = "Nonce"} = <CFData 0x1e886ac0 [0x351650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x1a3d10 [0x351650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 0
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: OSBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: AMSS_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModePending
bbupdater: Hello response boot mode: ETLSAHModePending
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'OSBL'...
bbupdater: 0x6e050 of 0x6e050 (100 percent)
bbupdater:
bbupdater: Took 0.073293 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeComplete
bbupdater: Hello response boot mode: ETLSAHModeComplete
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'ELF'...
bbupdater: 0x32000 of 0x12c0000 (1 percent)
bbupdater: 0x6013f of 0x12c0000 (2 percent)
bbupdater: 0x885000 of 0x12c0000 (45 percent)
bbupdater: 0x1085000 of 0x12c0000 (88 percent)
bbupdater: 0x119b000 of 0x12c0000 (93 percent)
bbupdater: 0x12b1000 of 0x12c0000 (99 percent)
bbupdater: 0x12c0000 of 0x12c0000 (100 percent)
bbupdater:
bbupdater: Took 3.190453 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: Modem not booting
bbupdater: Modem not booting, attempts 0
bbupdater: Attempting to erase EFS and restarting the update process
000509.452637 hsic-baseband::deviceReadyInterrupt: interval of 86ms, should be >= 100ms
bbupdater: END(kBBUReturnTryAgain): Preparing Initial stage
bbupdater: END: Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage initial
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 5...bbupdater: OK
bbupdater: Modem not booting
bbupdater: END: Preparing Initial stage
bbupdater: END: Querying info at stage initial
bbupdater: BEGIN: Querying info at stage first
bbupdater: BEGIN: Preparing first stage
bbupdater: END: Preparing first stage
bbupdater: Connecting to Loader...bbupdater: OK
bbupdater: Getting Version...bbupdater: OK
bbupdater: Loader version: PBL-DownloaderVER1.0
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x1d5879e0 [0x351650]>{type = mutable dict, count = 4,
entries =>
2 : <CFString 0x1a3e70 [0x351650]>{contents = "VendorID"} = <CFNumber 0x1d5850d0 [0x351650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1a3110 [0x351650]>{contents = "ChipID"} = <CFNumber 0x1e886270 [0x351650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x1a3e60 [0x351650]>{contents = "CertID"} = <CFNumber 0x1e880190 [0x351650]>{value = +2, type = kCFNumberSInt32Type}
6 : <CFString 0x1a3d10 [0x351650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (123743 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: Loading...
bbupdater: 0x2001a100 of 0x2002fe98 (26 percent)
bbupdater: 0x20022200 of 0x2002fe98 (53 percent)
bbupdater: 0x2002a300 of 0x2002fe98 (80 percent)
bbupdater: 0x2002fe98 of 0x2002fe98 (100 percent)
bbupdater:
bbupdater: Launching...bbupdater: OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: BEGIN: Preparing Second stage
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: END: Preparing Second stage
bbupdater: BEGIN: Gathering Personalization parameters...
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 1
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: NONCE: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
bbupdater: SNUM: 0x22CF2DE3
bbupdater: CHIPID: 0x005a00e1
bbupdater: END: Gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x1d5879e0 [0x351650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1a3e70 [0x351650]>{contents = "VendorID"} = <CFNumber 0x1d5850d0 [0x351650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1a3110 [0x351650]>{contents = "ChipID"} = <CFNumber 0x1e886820 [0x351650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x1a3e60 [0x351650]>{contents = "CertID"} = <CFNumber 0x1e880190 [0x351650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x1a3d40 [0x351650]>{contents = "Nonce"} = <CFData 0x1e886630 [0x351650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x1a3d10 [0x351650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Resuming Maverick Protocol
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: e3 e1 a8 4e 5e 33 2c 3e 43f2 16 a8 1f 4c f0 bc 50 89 2d 49
bbupdater: OSBL_HASH: bc 9f 2f 3e 6d b8 c6 93 05eb 6a f4 d9 a5 24 9a e0 f2 ec 1d
bbupdater: AMSS_HASH: 97 75 d6 e1 91 80 e7 ba 8dda 74 76 8f 14 b1 d6 d9 32 75 b7
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Saving personalized image to /mnt1/usr/standalone/firmware
bbupdater: Backing up /mnt1/usr/standalone/firmware/Trek-personalized.zip to /mnt1/usr/standalone/firmware/Trek/
bbupdater: Waiting 30 seconds for BB to perform EFS erase
bbupdater: BB EFS erase done after 10.100000 seconds
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Adding 60.000000 seconds in timeout for EFS erase
bbupdater: Creating transport, attempts remaining 5...bbupdater: OK
bbupdater: Modem not booting
bbupdater: END: Preparing Initial stage
bbupdater: END: Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage first
bbupdater: BEGIN: Preparing first stage
bbupdater: END: Preparing first stage
bbupdater: Connecting to Loader...bbupdater: OK
bbupdater: Getting Version...bbupdater: OK
bbupdater: Loader version: PBL-DownloaderVER1.0
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x1d5879e0 [0x351650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1a3e70 [0x351650]>{contents = "VendorID"} = <CFNumber 0x1d5850d0 [0x351650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1a3110 [0x351650]>{contents = "ChipID"} = <CFNumber 0x1e8855d0 [0x351650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x1a3e60 [0x351650]>{contents = "CertID"} = <CFNumber 0x1e880190 [0x351650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x1a3d40 [0x351650]>{contents = "Nonce"} = <CFData 0x1e886630 [0x351650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x1a3d10 [0x351650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: Loading...
bbupdater: 0x2001a100 of 0x2002ffa4 (26 percent)
bbupdater: 0x20022200 of 0x2002ffa4 (53 percent)
bbupdater: 0x2002a300 of 0x2002ffa4 (80 percent)
bbupdater: 0x2002ffa4 of 0x2002ffa4 (100 percent)
bbupdater:
bbupdater: Launching...bbupdater: OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: BEGIN: Preparing Second stage
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: END: Preparing Second stage
bbupdater: Not in restore mode - skipping gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x1d5879e0 [0x351650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1a3e70 [0x351650]>{contents = "VendorID"} = <CFNumber 0x1d5850d0 [0x351650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1a3110 [0x351650]>{contents = "ChipID"} = <CFNumber 0x1e8855d0 [0x351650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x1a3e60 [0x351650]>{contents = "CertID"} = <CFNumber 0x1e880190 [0x351650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x1a3d40 [0x351650]>{contents = "Nonce"} = <CFData 0x1e886630 [0x351650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x1a3d10 [0x351650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 0
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: OSBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: AMSS_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModePending
bbupdater: Hello response boot mode: ETLSAHModePending
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'OSBL'...
bbupdater: 0x6e050 of 0x6e050 (100 percent)
bbupdater:
bbupdater: Took 0.073234 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeComplete
bbupdater: Hello response boot mode: ETLSAHModeComplete
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'ELF'...
bbupdater: 0x32000 of 0x12c0000 (1 percent)
bbupdater: 0x6013f of 0x12c0000 (2 percent)
bbupdater: 0x885000 of 0x12c0000 (45 percent)
bbupdater: 0x1085000 of 0x12c0000 (88 percent)
bbupdater: 0x119b000 of 0x12c0000 (93 percent)
bbupdater: 0x12b1000 of 0x12c0000 (99 percent)
bbupdater: 0x12c0000 of 0x12c0000 (100 percent)
bbupdater:
bbupdater: Took 3.205389 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
000555.427195 hsic-baseband::deviceReadyInterrupt: interval of 85ms, should be >= 100ms
bbupdater: Adding 60.000000 seconds in timeout for EFS erase
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: Modem not booting
bbupdater: Modem not booting, attempts 0
bbupdater: END(kBBUReturnIOError): Preparing Initial stage
bbupdater: END(kBBUReturnIOError): Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: bbupdater error: kBBUReturnIOError
0: RamrodErrorDomain/3ec: update_baseband: failed to perform next stage
1: BBUpdater/10
unable to convert ramrod error 1004
attempting to dump restore log
writing log file: /mnt1/restore.log
The second part which was seperated with other log files
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage first
bbupdater: BEGIN: Preparing first stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 5...bbupdater: OK
bbupdater: END: Preparing first stage
bbupdater: Connecting to Loader...bbupdater: OK
bbupdater: Getting Version...bbupdater: OK
bbupdater: Loader version: PBL-DownloaderVER1.0
bbupdater: Fusing disallowed, will treat as fused
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x1d66c8f0 [0x2e3650]>{type = mutable dict, count = 4,
entries =>
2 : <CFString 0x130e70 [0x2e3650]>{contents = "VendorID"} = <CFNumber 0x1d56bf90 [0x2e3650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x130110 [0x2e3650]>{contents = "ChipID"} = <CFNumber 0x1d66bb60 [0x2e3650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x130e60 [0x2e3650]>{contents = "CertID"} = <CFNumber 0x1d56b2c0 [0x2e3650]>{value = +2, type = kCFNumberSInt32Type}
6 : <CFString 0x130d10 [0x2e3650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (123743 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: Loading...
bbupdater: 0x2001a100 of 0x2002fe98 (26 percent)
bbupdater: 0x20022200 of 0x2002fe98 (53 percent)
bbupdater: 0x2002a300 of 0x2002fe98 (80 percent)
bbupdater: 0x2002fe98 of 0x2002fe98 (100 percent)
bbupdater:
bbupdater: Launching...bbupdater: OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: BEGIN: Preparing Second stage
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: END: Preparing Second stage
bbupdater: BEGIN: Gathering Personalization parameters...
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 0
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: NONCE: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
bbupdater: SNUM: 0x22CF2DE3
bbupdater: CHIPID: 0x005a00e1
bbupdater: END: Gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x1d66c8f0 [0x2e3650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x130e70 [0x2e3650]>{contents = "VendorID"} = <CFNumber 0x1d56bf90 [0x2e3650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x130110 [0x2e3650]>{contents = "ChipID"} = <CFNumber 0x1d66a3c0 [0x2e3650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x130e60 [0x2e3650]>{contents = "CertID"} = <CFNumber 0x1d56b2c0 [0x2e3650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x130d40 [0x2e3650]>{contents = "Nonce"} = <CFData 0x1d669900 [0x2e3650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x130d10 [0x2e3650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Resuming Maverick Protocol
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: e3 e1 a8 4e 5e 33 2c 3e 43f2 16 a8 1f 4c f0 bc 50 89 2d 49
bbupdater: OSBL_HASH: bc 9f 2f 3e 6d b8 c6 93 05eb 6a f4 d9 a5 24 9a e0 f2 ec 1d
bbupdater: AMSS_HASH: 97 75 d6 e1 91 80 e7 ba 8dda 74 76 8f 14 b1 d6 d9 32 75 b7
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Saving personalized image to /mnt1/usr/standalone/firmware
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 5...bbupdater: OK
bbupdater: Modem not booting
bbupdater: END: Preparing Initial stage
bbupdater: END: Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage first
bbupdater: BEGIN: Preparing first stage
bbupdater: END: Preparing first stage
bbupdater: Connecting to Loader...bbupdater: OK
bbupdater: Getting Version...bbupdater: OK
bbupdater: Loader version: PBL-DownloaderVER1.0
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x1d66c8f0 [0x2e3650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x130e70 [0x2e3650]>{contents = "VendorID"} = <CFNumber 0x1d56bf90 [0x2e3650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x130110 [0x2e3650]>{contents = "ChipID"} = <CFNumber 0x1d66a970 [0x2e3650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x130e60 [0x2e3650]>{contents = "CertID"} = <CFNumber 0x1d56b2c0 [0x2e3650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x130d40 [0x2e3650]>{contents = "Nonce"} = <CFData 0x1d669900 [0x2e3650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x130d10 [0x2e3650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: Loading...
bbupdater: 0x2001a100 of 0x2002ffa4 (26 percent)
bbupdater: 0x20022200 of 0x2002ffa4 (53 percent)
bbupdater: 0x2002a300 of 0x2002ffa4 (80 percent)
bbupdater: 0x2002ffa4 of 0x2002ffa4 (100 percent)
bbupdater:
bbupdater: Launching...bbupdater: OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: BEGIN: Preparing Second stage
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: END: Preparing Second stage
bbupdater: Not in restore mode - skipping gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x1d66c8f0 [0x2e3650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x130e70 [0x2e3650]>{contents = "VendorID"} = <CFNumber 0x1d56bf90 [0x2e3650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x130110 [0x2e3650]>{contents = "ChipID"} = <CFNumber 0x1d66a970 [0x2e3650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x130e60 [0x2e3650]>{contents = "CertID"} = <CFNumber 0x1d56b2c0 [0x2e3650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x130d40 [0x2e3650]>{contents = "Nonce"} = <CFData 0x1d669900 [0x2e3650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x130d10 [0x2e3650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 0
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: OSBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: AMSS_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModePending
bbupdater: Hello response boot mode: ETLSAHModePending
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'OSBL'...
bbupdater: 0x6e050 of 0x6e050 (100 percent)
bbupdater:
bbupdater: Took 0.073458 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeComplete
bbupdater: Hello response boot mode: ETLSAHModeComplete
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'ELF'...
bbupdater: 0x32000 of 0x12c0000 (1 percent)
bbupdater: 0x6013f of 0x12c0000 (2 percent)
bbupdater: 0x885000 of 0x12c0000 (45 percent)
bbupdater: 0x1085000 of 0x12c0000 (88 percent)
bbupdater: 0x119b000 of 0x12c0000 (93 percent)
bbupdater: 0x12b1000 of 0x12c0000 (99 percent)
bbupdater: 0x12c0000 of 0x12c0000 (100 percent)
bbupdater:
bbupdater: Took 3.207008 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: Modem not booting
bbupdater: Modem not booting, attempts 0
bbupdater: Attempting to erase EFS and restarting the update process
000649.085642 hsic-baseband::deviceReadyInterrupt: interval of 30ms, should be >= 100ms
bbupdater: END(kBBUReturnTryAgain): Preparing Initial stage
bbupdater: END: Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage initial
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 5...bbupdater: OK
bbupdater: Modem not booting
bbupdater: END: Preparing Initial stage
bbupdater: END: Querying info at stage initial
bbupdater: BEGIN: Querying info at stage first
bbupdater: BEGIN: Preparing first stage
bbupdater: END: Preparing first stage
bbupdater: Connecting to Loader...bbupdater: OK
bbupdater: Getting Version...bbupdater: OK
bbupdater: Loader version: PBL-DownloaderVER1.0
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x1d66c8f0 [0x2e3650]>{type = mutable dict, count = 4,
entries =>
2 : <CFString 0x130e70 [0x2e3650]>{contents = "VendorID"} = <CFNumber 0x1d56bf90 [0x2e3650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x130110 [0x2e3650]>{contents = "ChipID"} = <CFNumber 0x1d66cd80 [0x2e3650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x130e60 [0x2e3650]>{contents = "CertID"} = <CFNumber 0x1d56b2c0 [0x2e3650]>{value = +2, type = kCFNumberSInt32Type}
6 : <CFString 0x130d10 [0x2e3650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (123743 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: Loading...
bbupdater: 0x2001a100 of 0x2002fe98 (26 percent)
bbupdater: 0x20022200 of 0x2002fe98 (53 percent)
bbupdater: 0x2002a300 of 0x2002fe98 (80 percent)
bbupdater: 0x2002fe98 of 0x2002fe98 (100 percent)
bbupdater:
bbupdater: Launching...bbupdater: OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: BEGIN: Preparing Second stage
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: END: Preparing Second stage
bbupdater: BEGIN: Gathering Personalization parameters...
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 1
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: NONCE: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
bbupdater: SNUM: 0x22CF2DE3
bbupdater: CHIPID: 0x005a00e1
bbupdater: END: Gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x1d66c8f0 [0x2e3650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x130e70 [0x2e3650]>{contents = "VendorID"} = <CFNumber 0x1d56bf90 [0x2e3650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x130110 [0x2e3650]>{contents = "ChipID"} = <CFNumber 0x1d571a50 [0x2e3650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x130e60 [0x2e3650]>{contents = "CertID"} = <CFNumber 0x1d56b2c0 [0x2e3650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x130d40 [0x2e3650]>{contents = "Nonce"} = <CFData 0x1d572570 [0x2e3650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x130d10 [0x2e3650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Resuming Maverick Protocol
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: e3 e1 a8 4e 5e 33 2c 3e 43f2 16 a8 1f 4c f0 bc 50 89 2d 49
bbupdater: OSBL_HASH: bc 9f 2f 3e 6d b8 c6 93 05eb 6a f4 d9 a5 24 9a e0 f2 ec 1d
bbupdater: AMSS_HASH: 97 75 d6 e1 91 80 e7 ba 8dda 74 76 8f 14 b1 d6 d9 32 75 b7
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Saving personalized image to /mnt1/usr/standalone/firmware
bbupdater: Backing up /mnt1/usr/standalone/firmware/Trek-personalized.zip to /mnt1/usr/standalone/firmware/Trek/
bbupdater: Waiting 30 seconds for BB to perform EFS erase
bbupdater: BB EFS erase done after 10.050000 seconds
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Adding 60.000000 seconds in timeout for EFS erase
bbupdater: Creating transport, attempts remaining 5...bbupdater: OK
bbupdater: Modem not booting
bbupdater: END: Preparing Initial stage
bbupdater: END: Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage first
bbupdater: BEGIN: Preparing first stage
bbupdater: END: Preparing first stage
bbupdater: Connecting to Loader...bbupdater: OK
bbupdater: Getting Version...bbupdater: OK
bbupdater: Loader version: PBL-DownloaderVER1.0
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x1d66c8f0 [0x2e3650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x130e70 [0x2e3650]>{contents = "VendorID"} = <CFNumber 0x1d56bf90 [0x2e3650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x130110 [0x2e3650]>{contents = "ChipID"} = <CFNumber 0x1d5723b0 [0x2e3650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x130e60 [0x2e3650]>{contents = "CertID"} = <CFNumber 0x1d56b2c0 [0x2e3650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x130d40 [0x2e3650]>{contents = "Nonce"} = <CFData 0x1d572570 [0x2e3650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x130d10 [0x2e3650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: Loading...
bbupdater: 0x2001a100 of 0x2002ffa4 (26 percent)
bbupdater: 0x20022200 of 0x2002ffa4 (53 percent)
bbupdater: 0x2002a300 of 0x2002ffa4 (80 percent)
bbupdater: 0x2002ffa4 of 0x2002ffa4 (100 percent)
bbupdater:
bbupdater: Launching...bbupdater: OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: BEGIN: Preparing Second stage
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: END: Preparing Second stage
bbupdater: Not in restore mode - skipping gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x1d66c8f0 [0x2e3650]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x130e70 [0x2e3650]>{contents = "VendorID"} = <CFNumber 0x1d56bf90 [0x2e3650]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x130110 [0x2e3650]>{contents = "ChipID"} = <CFNumber 0x1d5723b0 [0x2e3650]>{value = +5898465, type = kCFNumberSInt32Type}
4 : <CFString 0x130e60 [0x2e3650]>{contents = "CertID"} = <CFNumber 0x1d56b2c0 [0x2e3650]>{value = +2, type = kCFNumberSInt32Type}
5 : <CFString 0x130d40 [0x2e3650]>{contents = "Nonce"} = <CFData 0x1d572570 [0x2e3650]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
6 : <CFString 0x130d10 [0x2e3650]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11208092 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 0
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: OSBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: AMSS_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModePending
bbupdater: Hello response boot mode: ETLSAHModePending
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'OSBL'...
bbupdater: 0x6e050 of 0x6e050 (100 percent)
bbupdater:
bbupdater: Took 0.073248 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeComplete
bbupdater: Hello response boot mode: ETLSAHModeComplete
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'ELF'...
bbupdater: 0x32000 of 0x12c0000 (1 percent)
bbupdater: 0x6013f of 0x12c0000 (2 percent)
bbupdater: 0x885000 of 0x12c0000 (45 percent)
bbupdater: 0x1085000 of 0x12c0000 (88 percent)
bbupdater: 0x119b000 of 0x12c0000 (93 percent)
bbupdater: 0x12b1000 of 0x12c0000 (99 percent)
bbupdater: 0x12c0000 of 0x12c0000 (100 percent)
bbupdater:
bbupdater: Took 3.205251 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
000701.451161 hsic-baseband::deviceReadyInterrupt: interval of 85ms, should be >= 100ms
bbupdater: Adding 60.000000 seconds in timeout for EFS erase
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: Modem not booting
bbupdater: Modem not booting, attempts 0
bbupdater: END(kBBUReturnIOError): Preparing Initial stage
bbupdater: END(kBBUReturnIOError): Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: bbupdater error: kBBUReturnIOError
0: RamrodErrorDomain/3ec: update_baseband: failed to perform next stage
1: BBUpdater/10
unable to convert ramrod error 1004
attempting to dump restore log
writing log file: /mnt1/restore.log
There are some differences. Your hardware seem to be a slightly more responsive than mine. But it still looks like its gone. The key line of code that points out to this is "unable to convert ramrod error 1004"
I know, after scanning through all that lines, its in the last bit!
Its strange that my is also:
1. Black
2. 64GB
3. Working on a GSM carrier.
I am working on the fact that those three factors along with iOS 5.1.1 matter. Also, you tried this without the sim right?
Hi folks, just yesterday i can restore my iphone 4 that have a problem when i restore from itunes, when i do the restore from itnes, always showed me the following error:
01:41:37.0017] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[01:41:37.0017] Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
[01:41:37.0017] Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[01:41:37.0017] Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[01:41:37.0017] Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
[01:41:37.0017] Depth:5 Error:Exception at :0:
[01:41:37.0017] - kBBUReturnTimedOut(8)/16: Pinging timed out
what I did was this: just when I will finish the process, when the status bar is at the end in the firmware, only put the sim card and go back to take out, I do this like 4 or 5 times and the process restoration ends so well. This method I tried it 2 times and 2 times worked. I spent like 10 hours trying to restore iphone without results, until I started watching the logs and the key is when you are upgrading the firmware sends a command to answer yes. And I hope this helps.
This is the line of the log that appears and when the restoration is correct:
amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: YES
Regards.
Iphone 4s error code -1
