magsafe 2 for retina display macbook pro

I've had two different MacBook Pro's since 2006... I went through 4 magsafe power adapters as the cable coming straight off the connector always began to permanently bend at the magsafe connection point such that I didn't trust it from an electrical safety point of view (after seeing one arc at that point a time or two). Then when I bought what would be my 5th power adapter, much to my positive surprise, Apple had done a redesign that had the cable coming out at a right angle with repect to the way the older ones had the cable come out... They also beefed up how the cable comes out of the magsafe end.


Now I see a picture of the 85W power adapter for the new Retina display macbook pro I am planning to buy soon... And it looks like they've reverted to the old "wire straight out from the connector" approach...


Is that true??? That would be a significant step backward for me as where I have to plug in my mac (to the right of where I sit) having a straight cable coming out from the left of the mac is just going to cause me to start wasting power adapters again...


Might I be able to continue to use the 85W power adapter I currently have on my 17 inch 2009 macbook pro??? And it's not the original power adapter but one I bought maybe in 2011 or so... I love this one where the cable leaves in the direction heading out away from the top of the mac rather than the ones that came out straight to the left... And the picture of the new one appears to come out straight to the left again...


And what do you even call the power adapter I have that I bought in about 2011 where the cable comes out at a right angle to the magsafe connector itself???


Any help folks can provide on the questions above would be much appreciated... thanks... bob...

MacBook Pro, Mac OS X (10.7.3)

Posted on Jun 15, 2012 9:45 AM

Reply
8 replies

Jun 15, 2012 10:42 AM in response to Robert Paris

I have a MBA 2011 that has the Magsafe connector that comes off the connector at a right angle and love the design of it. I just purchased the MBP Retina and was quite suprised to find the connector used was bulker and did not use that same right angle design as the MBA. I sure wish they had - it works great. I can see the likely problems you describe coming from this design.

Jun 15, 2012 11:16 AM in response to stevejobsfan0123

Ahhh, remember the Mac Pro from a few years ago that used a refrigerant?


And a number of years ago the Cray XMP and YMP had all of the cpus immersed in refrigerants because they ran so hot they were melting the solder and chips. Those were something to run on...unbelievable speed, well for that point in time.


I used to have a watch that had more computing power than the IBM 1620 I first learned to program on.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

magsafe 2 for retina display macbook pro

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.