Old software- want to upgrade

You will need to upgrade to Office 2011. Office 2001 will not work with Snow Leopard.

Yes. Visit www.mactopia.com. You can do that after you upgrade to Snow Leopard. I'll offer these suggestions:

How to Install OS X Updates Successfully

A. Repair the Hard Drive and Permissions:

Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.

If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

B. Make a Bootable Backup Using Restore Option of Disk Utility:

1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.

Destination means the external backup drive. Source means the internal startup drive.

C. Important: Please read before installing:

1. If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
2. You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.

D. To upgrade:

Purchase the Snow Leopard Retail DVD.

Boot From The OS X Installer Disc:

1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.

Erase Drive and Install Snow Leopard

1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.

If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.

2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.

3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

4. Quit DU and return to the installer. Install Snow Leopard.

E. To Further Update Snow Leopard:

1. Download and install update(s)
2. Use Software Update, or
3. Download standalone updater(s).

Check out NeoOfficehttp://download.neooffice.org/neojava/en/index.php

NeoOffice is equivalent to Microsoft Office. It can open Excel files, Word files & PowerPoint files. You can also create these types of files that can be opened by PC users. Best of all, it's free.

 Cheers, Tom 😉