Hi,
after upgrade from Lion to Mountain Lion, TimeMachine is not working anymore.
In Console, I get this error:
com.apple.backupd[6067]: Backup failed with error: 19
Should I apply this command?
http://www.trollop.org/2012/07/12/os-x-10-8-mountain-lion-time-machine-netatalk/
Is this a new issue?
I'm using Iomega NAS ix2-200 Cloud Edition
Thanks
Oliver
MacBook Air (13-INCH, MID 2011), OS X Mountain Lion
I had the same issue. I discovered that with the installation of Mountain Lion the network hosst name was changed.
from baggeraar's-imac to baggeraars-imac. when I made a new time machine backup in the web based configurator of the Iomega NAS with the new host name, the problem was solved.
My solution was to:
HTH
Oliver
Also for me your solution worked, thanks!
But if I am not connected to the NAS I recive an error window stating that TM is unable to find the server.
How to reset to the original defaul settings when Iomega come out with a new firmware?
Thanks,
PierG
The solution was a little off for me for some reason, but THANK YOU, it got me on the right track.
First of all, I have the same setup (i.e. Mountain Lion with an IOMega Storcenter ix200), and after the upgrade to ML, the TimeMachine Backups failed.
IOMega posted their solution here:
However, the instructions are vague.
To clarify what worked for me, from Terminal, run the following command (obviously replacing the username and IP address with your values, and without the <>'s)
sudo tmutil -ap setdestination afp://<USERNAME_GOES_HERE>@<IP_ADDR_GOES_HERE>/TimeMachine
Instead of using the IP address, I'm sure you could use your Nas name (e.g. MyNasName.local). However, I setup a DHCP reservation for my NAS so that it gets the same IP all the time.
Backup failed with error 19, after ML upgrade
