after encrypting with filevault 2 on mountain lion, safari is extremely slow

Has anyone but you ever administered this computer?

Is it possible that you installed those items and don't remember? What I'm getting at is whether someone else has been modifiying your system without your knowledge.

Please read this whole message before doing anything.

This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.

Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.

These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.

Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.

Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.

Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.

Launch the Terminal application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.

When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.

Step 1

Copy or drag — do not type — the line below into the Terminal window, then press return:

kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'

Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.

Step 2

Repeat with this line:

sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'

This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.

Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.

Step 3

launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'

Step 4

ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null

Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.

Step 5

osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null

Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.

You can then quit Terminal.

Please read this whole message carefully, especially the warnings, before doing anything.

1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.

2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.

3. You should either remove or update the following system modification(s), if an update is available from the developer:

N/A

and definitely remove at least the following:

1Password

† 3ivx

† All Intego products

† All Micromat products

† Application Enhancer

† CleanMyMac

† Duplicate fonts in home folder

Evernote SafariClipper plugin

FlipShare

† Macaroni

Move Media Player plugin

† SIMBL

† Sophos

SpamSieve

† TextExpander

† VirtualPC (non-functional partial installation)

4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. In some cases it may be necessary to re-download or even reinstall the software in order to get rid of it. I can't be more specific, because I don't install such things myself. Please do your own research.

Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.

Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.

If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.

WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and maymake the problem worse. The same goes for "utilities" that purport to remove software.

5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.

6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.

Uninstall SIMBL as follows.

Select Go ▹ Go to Folder… from the Finder menu bar, then enter the following text in the box that opens:

/Library

A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.

Application Support/SIMBL

InputManagers/SIMBL.bundle

Log out and log back in.

Make sure you never reinstall SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

How to maintain a Mac

1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine.

2. Keep your software up to date. Software Update can be set to notify you automatically of updates to OS X. Some third-party applications have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.

3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.

The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.

The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

The free anti-malware application ClamXav is not crap, and although it’s not routinely needed, it may be useful in some environments, such as a mixed Mac-Windows enterprise network.

4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until recently, but are now increasingly common, and increasingly dangerous.

There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.

Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a known corporate brand, such as Adobe Flash, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.

Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names.

5. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” “rebuilding the directory,” “running periodic scripts,” “deleting log files,” “scanning for viruses,” or “repairing permissions.” Such measures are for solving problems as they arise, not for maintenance.

The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Don’t waste money on Disk Warrior or anything like it.

i don't have SIMBL installed, i removed it a while ago.

No, you did not.

i'm not removing the following, the are used and needed

As I wrote above, you can reinstall the modifications once you have a clean system to test. I can see how you might have a use for TextExpander. CleanMyMac is worthless, and nobody needs it. In any case, I have no other suggestions. Good luck.

Are you willing to cooperate?

You just blew off the pre-imminent expert in this forum. Follow his advice. All of it and you might have a chance at fixing your problems. The only person that wasted their time was Mr Davis.

I posted instructions for removing SIMBL. If you follow them, it will be removed.

The effect of a system-wide installation depends in part on user-level settings.

I don't have a computer lab and staff with which to test every possible combination of system modifications. The only way I, or you, can have an idea of what's going on is to return the system to a nearly clean state, corresponding to what I use myself. I've used this procedure hundreds, maybe thousands of times on this site, and in almost all cases where the user cooperates, the problem gets solved. It does take some effort on your part as well as mine.