Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Start up disk os x won't eject

Start up disk will not boot or eject. Gray screen is up for 20 seconds and then iMac attempts to restart. What should I try?

iMac (24-inch), Mac OS X (10.6.8)

Posted on Aug 13, 2012 4:22 PM

Reply
Question marked as Best reply

Posted on Aug 13, 2012 4:24 PM

Booting From An OS X Installer Disc


1. Insert OS X Installer Disc into the optical drive.

2. Restart the computer.

3. Immediately after the chime press and hold down the "C" key.

4. Release the key when the spinning gear below the dark gray Apple logo appears.

5. Wait for installer to finish loading.


Five ways to eject a stuck CD or DVD from the optical drive


Ejecting the stuck disc can usually be done in one of the following ways:


1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.


2. Press the Eject button on your keyboard.


3. Click on the Eject button in the menubar.


4. Press COMMAND-E.


5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:




/usr/bin/drutil eject


If this fails then try this:


Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

1 reply
Question marked as Best reply

Aug 13, 2012 4:24 PM in response to Doug Stark

Booting From An OS X Installer Disc


1. Insert OS X Installer Disc into the optical drive.

2. Restart the computer.

3. Immediately after the chime press and hold down the "C" key.

4. Release the key when the spinning gear below the dark gray Apple logo appears.

5. Wait for installer to finish loading.


Five ways to eject a stuck CD or DVD from the optical drive


Ejecting the stuck disc can usually be done in one of the following ways:


1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.


2. Press the Eject button on your keyboard.


3. Click on the Eject button in the menubar.


4. Press COMMAND-E.


5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:




/usr/bin/drutil eject


If this fails then try this:


Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Start up disk os x won't eject

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.