Previous 1 2 3 4 Next 49 Replies Latest reply: Oct 13, 2015 12:14 PM by efierro Branched to a new discussion.
fir3murd3r3r Level 1 (0 points)

My Bluetooth has gone missing and when i click on bluetooth file exchanger i get this message: no bluetooh hardware found. In order to use this application, you must have a bluetooth module. please verify that your bluetooth hardware is properly attached to the computer.


Could someone please send me a bluetooth driver down load for a macbook pro 15 inch 2011 or another way to solve my problem.


Thank you Apple support community.

MacBook Pro (15-inch Early 2011), Mac OS X (10.7.4)
  • Barry Hemphill Level 8 (37,327 points)



    Try resetting the SMC.  There is no "Bluetooth driver."



  • fir3murd3r3r Level 1 (0 points)

    I tried restting by hold left shift-command- control and power at the same time then releasing. It just ends up turning itself back on with no change to my bluetooth.


    Ps. Im used to working on PC's, ergo "bluetooth driver".

  • fir3murd3r3r Level 1 (0 points)

    Update i have tried reseting it with the shutting down and holding power for 5 seconds with nothing attached then releasing. It automaticly turns back on, with the bluetooth still not working.

  • Barry Hemphill Level 8 (37,327 points)



    Read this carefully.  If I have read your post accurately, you did not use the correct keys:


    Resetting the System Management Controller (SMC)

    Resetting the SMC on Mac portables with a battery you can remove

    Resetting the SMC on portables with a battery you should not remove on your own

    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).

    1. Shut down the computer.
    2. Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    3. On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    4. Release all the keys and the power button at the same time.
    5. Press the power button to turn on the computer. 
      : The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.




    P.S.  I am assuming I selected the correct MacBook Pro....


    Message was edited by: Barry Hemphill

  • fir3murd3r3r Level 1 (0 points)

    Yes after re-reading i relaized i messed up. Still nothing happened. No LED light change or flash off. I tried holding all down for five seconds and even a quick press and release. Then turned my computer back on, with nothing to show for it.

  • Barry Hemphill Level 8 (37,327 points)



    No help to you, but the SMC reset almost always fixes missing Bluetooth problems. 


    It is possible, of course, that the module has failed.  If you are near one, take it into an Apple store and have them test it for you.



  • fir3murd3r3r Level 1 (0 points)



    If my college supports Apple should they be able to fix it?


    Ill take it to them later today and post back with results.


    Thank you.

  • onemac Level 1 (0 points)



    This morning I couldn't get my Apple wireless keyboard to connect to my MacBook Pro.  I tried again and again to make contact but the keyboard wasn't found.  Then my brain finally clicked into "thinking" mode and I remembered the same situation having arisen some months ago.  I went to investigate!


    I went downstairs to fetch my iPad which was on but sleeping and brought it upstairs and turned it off.  Then I tried getting my keyboard in touch with my MacBook again and, as Bubbles of The Trailer Park Boys would say, "bingo!"  It worked!


    Explanation?  The keyboard (and I believe all Bluetooth devices) can only be in touch with one machine at a time. I have the keyboard paired with both my MacBook and my iPad (which I only use with the keyboard when I'm travelling).  Earlier in the day, the keyboard was connected to the MacBook and working fine, but the MacBook was getting a bit slow, so I decided to shut it down and start it up again.  When I did so, I didn't turn the keyboard off, and of course, it lost its connection to the MacBook.


    Meanwhile, however, sitting downstairs was the sleeping iPad, and even though it was quite a distance away, it must have picked up the Bluetooth signal from the keyboard and made a connection with it the moment I turned off the MacBook.  Then when I turned the MacBook back on, it wasn't possible to make a connection with the keyboard because the keyboard's signal was now being used by the sleeping iPad.  Because (as far as I know) a Bluetooth device can only be connected with one machine at a time, the MacBook simply couldn't connect with the keyboard as long as the keyboard was connected to the iPad.


    I assume that other folks have figured this out, and maybe there is at least one discussion on the forum about it, but unfortunately I don't have the time to look for it.  Anyway, even if this is not the solution to your problem, fir3murd3r3, I hope this might help someone somewhere with solving this embarrassing but very frustrating problem that I have found myself in a couple of times.  I just hope I remember all this the next time I get myself into the same situation! 


    Good luck!



  • fir3murd3r3r Level 1 (0 points)

    Update: My colleges IT has been too busy to take a deeper look for me but they have two ideas. 1. broken bluetooth hardware, 2. Missing/ corrupt bluetooth files.

  • DJ RDL Level 1 (0 points)

    OK..   so ive had this problem and tried all these fixes and nothing worked.  (Restarted computer/Reset the SMC/everything!)


    I by accident found a very easy fix that worked for me.   All I did was log out my user profile and logged into a different Apple Profile I had on my comp and to my surprise the bluetooth was working on that profile.  So I logged back into my main profile and the bluetooth was then available again.


    hope this works

  • sc0007 Level 1 (0 points)

    If your bluetooth service is suddenly not available on your Mac, here is a fix:

    01. Click on “Finder” in bottom left of your screen in the Dock
    02. Click on your “Home” icon on the left (picture of a house)
    03. Double-click on the “Library” folder
    04. Double-click on “Preferences” folder
    05. Delete file named “” (also delete any other item with “…”, if any)
    06. Shutdown your computer
    07. Unplug all USB and Firewire devices
    08. Unplug power cord
    09. Remove battery (if it’s a Macbook or Macbook Pro)
    10. Wait 1-2 min
    11. Hold down power button for 10 sec with the battery out (if it’s a Macbook or Macbook Pro)
    12. Insert battery (if it’s a Macbook or Macbook Pro)
    13. Startup again
    14. It should work!


  • Orioloq Level 1 (0 points)

    I tried all the above to no avail. What solved it for me was running the hardware test:


    After that bluetooth was available and working again.


    Hope this helps!

  • Tony34 Level 1 (0 points)

    I've had this problem for about six months and I've never been able to fix it. I've literally sat for hours looking through posts on google about Bluetooth on MacBook Pros becoming unavailable or disappearing. I tried almost everything (even reinstalled OS). I was starting to believe that this has to be a bluetooth hardware issue. Either the Bluetooth chip was defective in all these MacBooks or I some how broke it. I didn't think at all that it could still be a software issue after all that I've tried. I think I was wrong because...


    I finally tried the most simple thing that finally FIXED my Bluetooth on my MacBook Pro.


    All you have to do is...

    1) shutdown the MacBook

    2) once its off, hold down the power button for at least 20seconds. I was told that you'd hear a loud beep but mine didn't do anything. Not even the white led on the front turned on.

    3) if you had the same results, let go of the power button and now press and hold the power button again. This time, the white led should turn on and flash right before the gray screen and apple logo appears. Continue to hold the power button (just to make sure it works) and let go a few seconds after the spinning wheel under then apple logo appears.

    4) now check if your Bluetooth is back


    This surprisingly worked for me. I've never seen someone suggest this solution before, so I'm posting this for anyone else that has tried everything else and has finally given up.


    This may be a temporary fix because mine did go back to being unavailable after a restart. The Bluetooth works perfectly as long as you don't restart. If you do restart, just do the same thing again and the Bluetooth should be back.


    Please reply if this fixed your Bluetooth problem!

  • VinnyBob Level 1 (0 points)

    Tony 34,


    This procedure worked for me! Thanks!

Previous 1 2 3 4 Next