2 Replies Latest reply: Sep 3, 2012 4:15 PM by MacMan240
JSG137 Level 1 Level 1 (0 points)

my macbook pro late 2008 will not start


MacBook Pro, OS X Mountain Lion (10.8)
  • Kappy Level 10 Level 10 (244,725 points)

    Reinstalling Lion/Mountain Lion Without Erasing the Drive

     

    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.

     

    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.

     

    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.

     

    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.

     

    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • MacMan240 Level 1 Level 1 (80 points)

    Problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset:

     

    Resetting the System Management Controller (SMC)

    Resetting the SMC on Mac portables with a battery you can remove

    1. Shut down the computer.
    2. Disconnect the MagSafe power adapter from the computer, if it's connected.
    3. Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
    4. Press and hold the power button for 5 seconds.
    5. Release the power button.
    6. Reconnect the battery and MagSafe power adapter.
    7. Press the power button to turn on the computer.

    Resetting the SMC on portables with a battery you should not remove on your own

    1. Shut down the computer.
    2. Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    3. On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    4. Release all the keys and the power button at the same time.
    5. Press the power button to turn on the computer.