Do a quick search regarding Synthetic Sapphire glass and iPhone 5, and you'll see that several forums clearly show the effects of using this material as it's complete transparent to IR and UV.... The camera is already sensitive to IR but the glass exacerbates the issue.
A little shot across the bow, Canadianpj,
Thanks for your constructive comments.
---- Yes, I am trying to get the famous purple/pink haze with my iPhone4S and I can't get ANY of my pictures to come out anywhere near what we are seeing in the iPhone 5.
The only close pics I could get was from an IR remote. It shows a pinkish light. Diode is ~790nm.
Here is a picture I took about a week ago, using my iPhone camera. Note the sun is in the left corner.
I should be seeing the famed pink discolouration.
I'm not seeing anything like this on the iPhone 4S.
Shot was taken at Cheongyecheon (across from Bennigan's) in Seoul, S.Korea
Check this out:
If that is going to stay the answer then there is no fix coming for this. The only way something is going to go get done is if we do not let up. Keep calling Apple Support, keep going to the stores.
There is a simple solution to the problem. Use a filter. It would be a cheap and easy fix.
Filters that block NIR wavelengths are less than $3.
I tried getting pink to show up on the rear iPhone 4S camera using an IR source. Doesn't allow IR at all. In fact the filtering is pretty decent.
However on the front camera, I do get pink in bright sunlight and it happens to be IR sensitive to a remote.
remote typically use 790nm.
What does this tell me about out colouration in the iPhone 5?
I believe the cameras used on the iPhone5 are identical to the 4S. anyone else confirm this?
Anyone test a TV remote control with the iPhone 5 yet. Notice any flashing ?
I dare anyone to try it and see what happens.
Come on, this s simple physics. The purple color is due to the reflected light inside the lens bouncing off the coatings. I get the same with my very expensive Canon dSLR. Just change your shooting angle and the issue can be easily avoided.
Like Scotty said to Captain Kirk, "I canna change the laws of physics". :)
You obviously don't get a massive pink flare like the pictures were seeing unless you've purposely taken out the IR filter to do NIR photography. Canon DSLRs use multiple AR coated optics and have completely different image sensors.
Infact CMOS. You're comparing Apples to Oranges.
The fact you get a flare, isn't the point. You don't get pink/purplish fogging away from a high intensity lightsource on a Canon DSLR.
iPhone cameras are CCD sensors.. Just as any other phone on the market has. CCDs are particulary prone to showing IR, which is why they are used in night security cameras with NIR arrays.
I am a professional photographer, myself, with a background in digital imaging.
I know IR when I see it.
For anyone with a iPhone5 do the test below.
If you see the flashing of a TV remote on the rear (8MP) , post your pics.
*CAMERA IR TEST
Test your camera's IR sensitivity (credit for this goes to the Digital Infrared Basics article):
1. Point a TV, camera or other IR remote into the lens of your camera.
2. Press any button on the remote.
3. Look for the IR beam in the camera's TTL LCD or EVF (electronic viewfinder).
4. If the remote's beam looks bright, you should be able to get decent IR images—at least with the affordable dark red Hoya R72 filter or Wratten 89b equivalent.