Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

About Mountain Lion

I just download and install the OS X Mountain Lion and my computer is so slow that it takes forever to do the simplest task. What can I do?

MacBook Pro, OS X Mountain Lion (10.8.2)

Posted on Nov 19, 2012 3:28 PM

Reply
Question marked as Best reply

Posted on Nov 19, 2012 3:29 PM

Reinstalling Lion/Mountain Lion Without Erasing the Drive


Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.


Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.


When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.


Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.


Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

3 replies
Question marked as Best reply

Nov 19, 2012 3:29 PM in response to yadiralb

Reinstalling Lion/Mountain Lion Without Erasing the Drive


Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.


Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.


When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.


Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.


Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Nov 19, 2012 3:58 PM in response to yadiralb

First, back up all data immediately, as your boot drive might be failing.


Take these steps when you notice the problem.


Step 1


Launch the Activity Monitor application in any of the following ways:


☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)


☞ In the Finder, select Go Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.


☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.


Select the CPU tab of the Activity Monitor window.


Select All Processes from the menu in the toolbar, if not already selected.


Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.


Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?


Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)


Step 2


You must be logged in as an administrator to carry out this step.


Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.


Post the 50 or so most recent messages in the log — the text, please, not a screenshot.


When posting a log extract, be selective. Don't post more than is requested.

Please do not indiscriminately dump thousands of lines from the log into a message.

Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

About Mountain Lion

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.