only one working usb port
No mucked up pins
The non working is the one towards the screen.
I've done the:
CMD, op, p and r
ctrl, opt, shift, pwer
I'm fully updated (to my knowledge)
It's the early 2011 (no more support..)
If you need anything else, please let me know.
The non-working port WILL charge my cellphone.
I cannot mount my cellphone with that particular port though.
It won't let me use a mouse either.
or "my passport"
or a USB thumbstick
MacBookPro8,1
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: coonlferous MacBook Pro
User Name: kawaiiRACCUUMM (coonlferous)
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: Yes
Time since boot: 6 minutes
Power On Self-Test:
Last Run: 12/9/12 1:01 AM
Result: Passed
-------
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c2d
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfa
FaceTime HD Camera (Built-in):
Product ID: 0x8509
Vendor ID: 0x05ac (Apple Inc.)
Version: 5.16
Serial Number: CC2B1W0DGHDG6LL0
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa200000 / 3
Current Available (mA): 500
Current Required (mA): 500
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfa100000 / 2
Current Available (mA): 500
Current Required (mA): 2
USB Receiver:
Product ID: 0xc52f
Vendor ID: 0x046d (Logitech Inc.)
Version: 22.01
Speed: Up to 12 Mb/sec
Manufacturer: Logitech
Location ID: 0xfa130000 / 6
Current Available (mA): 500
Current Required (mA): 98
BRCM2070 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa110000 / 5
Current Available (mA): 500
Current Required (mA): 94
Bluetooth USB Host Controller:
Product ID: 0x821a
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.37
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa113000 / 8
Current Available (mA): 500
Current Required (mA): 0
Apple Internal Keyboard / Trackpad:
Product ID: 0x0245
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.08
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfa120000 / 4
Current Available (mA): 500
Current Required (mA): 40
-------
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c26
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Hub:
Product ID: 0x2513
Vendor ID: 0x0424 (SMSC)
Version: b.b3
Speed: Up to 480 Mb/sec
Location ID: 0xfd100000 / 2
Current Available (mA): 500
Current Required (mA): 2
IR Receiver:
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0xfd110000 / 3
Current Available (mA): 500
Current Required (mA): 100
I'll try anything. I was considering updating to Lion to see if anything would change but I'm afraid I'd pee away 20 dollars. Any suggestions??
MacBook Pro, Mac OS X (10.6.8)