Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

I'm getting the following error message when attempting to invoke "Find My Mac"


Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

MacBook Pro

Posted on Jan 2, 2013 7:11 AM

Reply
Question marked as Best reply

Posted on Jan 2, 2013 11:13 AM

You have no recovery partition. This is a normal condition if your boot volume is a software RAID, or if you modified the partition table after running Boot Camp Assistant to create a Windows partition. Otherwise, you need to reinstall OS X in order to add a recovery partition.


If you don't have a current backup, you need to back up before you do anything else.


You have several options for reinstalling.


1. If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X and did have a Recovery partition, then you can boot from the Time Machine volume into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.


2. If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-R at the startup chime. Release the keys when you see a spinning globe.


Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.


3. Use Recovery Disk Assistant (RDA) on another Mac running the same major version of OS X as yours to create a bootable USB device. Boot your Mac from the device by holding down the option key at startup.Warning: All existing data on the USB device will be erased when you use RDA.


Once you've booted into Recovery, the OS X Utilities screen will appear. Follow the prompts to reinstall OS X. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.


If none of the above choices is open to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer. When you run it, be sure to choose the right drive to install on.

1 reply
Question marked as Best reply

Jan 2, 2013 11:13 AM in response to gsquare43

You have no recovery partition. This is a normal condition if your boot volume is a software RAID, or if you modified the partition table after running Boot Camp Assistant to create a Windows partition. Otherwise, you need to reinstall OS X in order to add a recovery partition.


If you don't have a current backup, you need to back up before you do anything else.


You have several options for reinstalling.


1. If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X and did have a Recovery partition, then you can boot from the Time Machine volume into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.


2. If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-R at the startup chime. Release the keys when you see a spinning globe.


Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.


3. Use Recovery Disk Assistant (RDA) on another Mac running the same major version of OS X as yours to create a bootable USB device. Boot your Mac from the device by holding down the option key at startup.Warning: All existing data on the USB device will be erased when you use RDA.


Once you've booted into Recovery, the OS X Utilities screen will appear. Follow the prompts to reinstall OS X. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.


If none of the above choices is open to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer. When you run it, be sure to choose the right drive to install on.

Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.