safari and amazon - toxic - needs a fix

From the Safari menu bar, select

Safari ▹ Preferences ▹ Extensions

If any extensions are installed, disable them and test.

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.

Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.

Test. After testing, reboot as usual and post the results.

...after I test and reboot as usual, my passwords will be restored?

Booting into Recovery is just a test. It won't change anything. Your passwords won't be touched.

I assume that by "test" you mean go to Amazon and see if I can replicate the problems I've been having

Yes.

if I cannot, I can assume I've fixed the problem?

No, you won't have fixed anything, but you'll know that the problem resides on your Mac and not in the network.

I missed the fact that you're running 10.6, so you don't have a Recovery partition.

Please read this whole message before doing anything.

This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.

Step 1

The purpose of this step is to determine whether the problem is localized to your user account.

Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”

While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.

Test while logged in as Guest. Same problem?

After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.

*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

Step 2

The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.

Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:

• Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
• When you see the gray Apple logo, release the shift key.
• If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.

Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.

The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.

Test while in safe mode. Same problem?

After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Hi Milos --

I surf Amazon frequesntly with no problems with Safari. After you delect all the Amazon cookies from Safari, are you RESTARTING Safari immediately? Have you deleted Amazon references from Autofill? Is it in you KeyChain app?

Why are you concerned about resetting Safari? If the above doesn't clear it up, definitely Reset.

Yes, please.

Can you log on to your Amazon account from another computer, phone, or tablet? That would make this problem a lot easier to solve.