Skip navigation

How do I access a home sharing network from my mac book pro?

322 Views 10 Replies Latest reply: Apr 3, 2013 5:21 PM by SwankPeRFection RSS
Harry Randhawa Level 1 Level 1 (0 points)
Currently Being Moderated
Apr 3, 2013 5:19 AM

How do I access a home sharing network from my mac book pro?

MacBook Pro, Mac OS X (10.7.5)
  • Shootist007 Level 6 Level 6 (16,640 points)

    Not sure what you mean by Home Sharing Network. All Mac's have no real problem accessing any LAN shares from any network they are physically connected to, by Ethernet or WiFi.

     

    The problems come from not setting up the other computers and the Mac correctly. I have a Mac that has no problems connecting to all my other Windows PCs running both Win 7 and XP and those Win PCs have no problem connecting to my Mac.

     

    You'll have to give a little more info on what systems you have and what exactly you want to do.

  • SwankPeRFection Level 4 Level 4 (1,435 points)

    Click on Finder and then Go and Computer.  On the left hand side, look under the SHARED section and expand that out and you should see Harry (the Windows machine name) listed in there.  Click on it to connect.  If you don't see any shares on it, that means you'll need to authenticate to the machine before seeing the shares.  You should see a Connect As button on that screen toward the 1 o'clock position.  Click it and enter the username and password you use to log into the Windows machine (blank passwords won't be allowed usually for normal sharing unless you have simple sharing turned On on the Windows box).

  • Shootist007 Level 6 Level 6 (16,640 points)

    What versions of Windows are you running, XP, Vista or 7 (or Win 8)? If they are all Windows 7 then more then likely you are using the HomeGroup sharing settings and that will not work with other systems, Mac or Windows, other then Windows 7 or 8. So you would have to disable the HomeGroup sharing setting and use the Workgroup system where every PC has a different computer name and they all use the same Workgroup name. Then you set the same Workgroup name on the Mac in the Network Sys Prefs Advanced WINS tab area.

     

    And of course turn on the SMB (Windows) Sharing setting in the Sharing Sys Prefs.

     

    Then once that is all done all computer should be able to see one another and access the Shared Resources on each computers.

  • Shootist007 Level 6 Level 6 (16,640 points)

    That is Go To Server in the Go menu item of Finder. But if you have the Windows PCs setup in a HomeGroup system then the Mac will not be able to access it as it does not have the same system for joining a HomeGroup.

     

    The whole HomeGroup system stuff is a JOKE being played on all Windows 7 users. It simply does not work with any other system running anything other then Windows 7. So until you check that and Leave the HomeGroup you will never access any of your Windows PCs from a Mac, or any other computer running any other OS, even XP or Vista.

  • Shootist007 Level 6 Level 6 (16,640 points)

    Ok just why haven't you simply followed my last post.

    Screen Shot 2013-04-03 at 5.41.38 PM.png

    Screen Shot 2013-04-03 at 5.42.08 PM.png

    Screen Shot 2013-04-03 at 5.42.41 PM.png

    Screen Shot 2013-04-03 at 5.45.47 PM.png

     

    Ok now do you see what I am talking about? i5 and 192.168.1.100 are the same Windows 7 computer.

     

    you have to start with SMB then : then // then the name of the system or the IP address. OS X has to be told to use the SMB (Windows) sharing protocol.

     

    There is no RUN in OS X like in Windows. The Go, Connect To Server is the best you'll get.

  • SwankPeRFection Level 4 Level 4 (1,435 points)

    As I said in my post, if you don't see anything under Shared, then you don't have anything advertising shares on your network.  Going to Connect To Server and connecting that way may get you to it as Shootist said, but you will most likely need to do a Connect As as I said in my previous post.  Again, if the systems are advertising shares, then this step wouldn't be needed.  You can also go to a Terminal prompt and see if you can ping the systems in question, even though if Firewalling is turned On on them, they may not be pingable, but would still be reachable for file access if that's properly set to allowable traffic.  Either way, you can at least see if you can resolve the name to IP via a ping in Terminal because if that doesn't work, you'll need to hit the share via IP address and not the "harry" name.

     

    What's puzzling is that you're running a Linux box but you're having a hard time with a Mac....?  It's pretty much the same thing.

Actions

More Like This

  • Retrieving data ...

Bookmarked By (0)

Legend

  • This solved my question - 10 points
  • This helped me - 5 points
This site contains user submitted content, comments and opinions and is for informational purposes only. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Apple Support Communities Terms of Use.