-
All replies
-
Helpful answers
-
Jun 13, 2013 12:59 PM in response to lusebraby Jeff Leigh,Do you now have an IPv6 address in the Network control panel screen?
Also check that the Airport has IPv6 enabled. You'll need AU 6.2 or 5.6 to access it obviously.
-
Jun 15, 2013 9:39 AM in response to dfavorby nickbyrd,Followed this. Still cannot find Airport Utility anywhere.
-
-
Jun 26, 2013 7:28 PM in response to dfavorby emmyjustin,Step by step instructions were great. Thanks for holding my hand.
-
Jul 5, 2013 10:32 AM in response to Jeff Leighby Lexvold,Thanks for the help. I made the changes to link-to-link the SYSTEM PREFERENCES, but would you recommend I also set it to link-to-link in the ADVANCED OPTIONS in the INTERNET section of Airport Utility as well?
-
Jul 8, 2013 12:36 PM in response to grafiksolby cbscpe,Activating IPv6 did not help in my case, so I had to fall back to Version 6.2 of the Airport Utility. Thanks for your instructions.
-
Jul 9, 2013 3:31 AM in response to dfavorby hotban,Thank a lot!
I have to downgrade to Airport Utility V6.2.
-
Jul 11, 2013 2:32 PM in response to grafiksolby grafiksol,Apple has just posted Airport Utility V6.3.1, with the following update note:
Use AirPort Utility to set up and manage your 802.11n and 802.11ac AirPort base stations, including AirPort Express, AirPort Extreme, and AirPort Time Capsule. AirPort Utility 6.3.1 resolves an issue where AirPort base stations may not appear in AirPort Utility.
For the latest information on AirPort software, check Software Update in System Preferences or the following Apple Support Downloads website: http://support.apple.com/downloads/.
-
Jul 11, 2013 4:08 PM in response to grafiksolby John Galt,Thanks grafiksol. Today's 6.3.1 update fixed things for me.
-
Jul 11, 2013 7:27 PM in response to John Galtby user1724,The 6.3.1 update did not work for me. It sees my Airport Extreme just fine, but it still cannot see my Airport Express Base Station.
Same on the current iOS version.
-
Jul 11, 2013 7:34 PM in response to grafiksolby EddieONON,When I updated 6.3 , my iMac 2011 not work, still can use wifi and network but no any airport and express display in Utility. Finally downed to 6.2.
In my MacBook Pro 2011, use 6.3 is fine, so strange.
My iphone 's airport utility also work fine.
Tonight I will try update 6.3.1.
Is 6.3.1 is out for OSX 10.8.4??
-
Jul 11, 2013 7:59 PM in response to user1724by John Galt,user1724 wrote:
The 6.3.1 update did not work for me. It sees my Airport Extreme just fine, but it still cannot see my Airport Express Base Station.
Same on the current iOS version.
If by any chance you are using an older, 802.11b/g only Express you will need to use this workaround to install an earlier version of AirPort Utility on a Mac.
The iOS version of AirPort Utility will not work for those older Express models.
-
Jul 11, 2013 8:33 PM in response to John Galtby user1724,It is a new Base Station.
But . . . I did a reboot of the Base Station and now it works. So you have to install 6.3.1 AND reboot the Base Station.
All good now. Even on the new iOS version.
-
Jul 12, 2013 11:39 PM in response to grafiksolby cbscpe,Upgrade to 6.3.1 did the job Now it finds my three Airports again without even rebooting the Base Stations.
-
Jul 13, 2013 4:34 AM in response to cbscpeby EddieONON,Same as u, so 6.3.1 fixes the problem finally.