-
All replies
-
Helpful answers
-
Jul 3, 2013 5:49 PM in response to Peter Scanlanby LaPastenague,★HelpfulPlug the TC into the new modem with a decent length ethernet cord.. a few meters..
Then simply setup roaming network.. so both the TC and the new modem will reinforce each other.. the setup is easy.. Bob at least says it is.. automagically from the new v6 utility.. but it is not hard to do manually either IMHO.
The basic rule is simple.
TC in bridge.
TC creates a wireless network. Same SSID.. ie wireless name Same security .. ie WPA2 AES = WPA2 Personal.. same password.
Voila there it is. although using different channels can be helpful.. if you run into problem.
Now you don't have to worry about which is stronger.. the MB will connect to whichever is stronger.. without human intervention.
Ask Bob to elaborate..
https://discussions.apple.com/thread/5146401?tstart=0
BTW the roaming network document is a help.
http://support.apple.com/kb/HT4260
The fact that you have one apple and one non-apple router here makes no difference except in terminology.