Stumped on IPv6
Hardware: Airport Extreme 6th Generation
Firmware: 7.7.1
Hello,
I am stumped on how to get a working IPv6 config for this new Airport Extreme. Appreciate any guidance you can offer.
Situation: Native IPv6 Internet-connected network with a Cisco 2911 (IOS 15.0) gateway router. Apple Airport Extreme 6th Generation (7.7.1 firmware) connected to a network on one of the local router interfaces. Router is handing out IPv6 using SLAAC and all other devices on the same network work fine with IPv6.
Goal: Use the Airport Extreme to provide IPv6 connectivity to wireless clients.
Cisco Config (Local Network)
IPv6 Address: 2001:aaaa:bbbb:100::1/56
Static Route: 2001:aaaa:bbbb:101::/64 via 2001:aaaa:bbbb:100::3
Airport Config
Configure IPv6: Manually
IPv6 Mode: Native
IPv6 WAN Address: 2001:aaaa:bbbb:100::3
IPv6 Default Route: 2001:aaaa:bbbb:100::1 <=== Cisco Router
IPv6 Delegated Prefix: 2001:aaaa:bbbb:101::/64
IPv6 LAN Address: 2001:aaaa:bbbb:101::1
What happens: Wireless device (MB Pro OSX 10.8.4) connects to the Airport and is handed an IPv6 address in the 2001:aaaa:bbbb:101::/64 subnet (interesting is that the router address is listed as an fe80 address instead of the 2001:aaaa:bbbb:101::1 address assigned to the LAN interface). The wireless client can ping the Airport LAN Interface, Airport WAN interface and Cisco. Cisco Can ping IPv6 Internet. Wireless client cannot connect to IPv6 Internet.
Any suggestions? Anyone have a similar config that is working.
Thanks in advance.
--Tom