I'm using Roland UA-25 in Garage band and after upgrading to Mavericks I cannot get sound output to work. Recording using the external soundcard's input seems to work but not the output. According to Roland the device should be compatible with Mavericks. Anyone else having the same issue? Please help!
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9), Garageband/Roland UA-25
I have the same problem
I have a guy from Roland UK taking over my MAc later today to see if he can resolve the issue.
He thinks it is an Apple Firmware issue!
Not happy
Yep, same has happened to me. Very annoying
I am in need of the same information. Updated and now no output on the Roland Ua 25ex. Dang! I can't blast my music...Well the neighbors are happy 🙂
Let me know if anybody has any fix or info pleeeeeeease
It seems like a lot of users have the same problem and the people at Roland seem to have noticed the problem:
http://www.roland.com/support/article/?q=information&p=UA%2D25&id=63061613
Hopefully they will fix the problem soon..
Hey guys, My problem is sorted
try the following
unplug the UA25 and switch sample rate to 44 and Advanced Driver to 'off'
when I reconnected I went to system preferences and selected UA25ex and hey presto.
I hope this helps
imd 4298 - you´re the best! It solved my problem too. I did just as you mentioned and - voilà! - everything worked again! Great work!
Per A 1192 wrote:
imd 4298 - you´re the best! It solved my problem too. I did just as you mentioned and - voilà! - everything worked again! Great work!
..........Really????? please tell my wife!
IMD4298 OMG you nailed it! THANKS MAN, you made my day!! 😀 Everything is working now and I'm so happy!
...or not. Now the output works but not the input..😕 I have tried switching the advanced mode off/on, changing the sample rate between 44, 48, 96hz, record mode vs play mode etc, reinstalling the drivers, unplugging the usb cable, changing the settings in Audio MIDI setup etc. Nothing works. It must be some kind of a firmware issue, I hope Roland fix this. Anyone tried using the old drivers for OSX 10.8? Imd4298 does the input work as well or do you have the same problem as me?
It's Roland's fault. Roland suggests not to upgrade to Mavericks in Late 2009 models because lots of users had issues. I can't undestand how can Mavericks work in Late 2009 MacBooks but Roland interfaces not (properly). My UA-4FX doesn't work in my MacBook (white) Late 2009. I send them several emails but no reply.
Visit the following link about Mavericks compatibility.
http://www.roland.com/support/article/?q=information&id=63061613
I hope Roland to fix this.
I've tried using 10.8 drivers but it's impossible to install. "This version is not compatible with your OsX"
Same problem with UA 20 and iMac late 2009 solved in the same way turning off the advanced driver.
Hi there!! Roland answered my email! Here is the link where is the DRIVER WHICH FIXES UA-4FX PROBLEM!
I can't beleve it but they solved it.
Thank you to all of you, this post helped me to keep it running while it doesn't work in advanced driver mode.
Congrats to all of UA-4FX users.
http://www.roland.com/support/article/?q=downloads&p=UA-4FX&id=63061799
Great to hear that Roland solved it for you!
My solution to my own problem was this: I bought a Propellerheads Balance. Works very well, thank you.
BR / P.
The new drivers (v1.0.1) solved my problem:
http://www.roland.com/support/article/?q=downloads&p=UA%2D25&id=63061795
🙂
No sound output with Roland UA-25 after upgrading from Mountain Lion to Mavericks
