-
All replies
-
Helpful answers
-
Jan 7, 2014 12:41 PM in response to Daltonkelleyby Baby Boomer (USofA),http://support.apple.com/kb/HT1547
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
================
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***
-
Jan 7, 2014 12:42 PM in response to Daltonkelleyby OGELTHORPE,Three beeps usually indicates that there is a RAM problem. If you installed new RAM replace with the original RAM. If you did not, take out the RAM chips, clean off the contacts and then reinstall it. Make certain that they are well seated.
If no success, try a SMC reset:
http://support.apple.com/kb/ht3964
If still no success, make an appointment at an Apple store genius bar.
Ciao.
-
Jan 7, 2014 12:46 PM in response to OGELTHORPEby Daltonkelley,I'm not very good with the technical aspects of the comp so I'm not sure what any of that is
-
Jan 7, 2014 12:54 PM in response to Daltonkelleyby OGELTHORPE,Then you have two choices:
Make an appointment at an Apple store genius bar and have them examine the MBP.
Or, you may select the correct MBP from those listed in this link, and watch the video on how to take out the RAM and install it. That will provide you with the necessary information to execute my instructions.
http://eshop.macsales.com/installvideos/
Ciao.
