Want to highlight a helpful answer? Upvote!

Did someone help you, or did an answer or User Tip resolve your issue? Upvote by selecting the upvote arrow. Your feedback helps others! Learn more about when to upvote >

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

SuperDuper?

Hello all,

I understand that there are probably a billion other posts concerning backup and this program. However, I have just a couple of questions I would liked confirmed.

Does SuperDuper require an external drive? If not, where does the program store your precious data?

I want the backup to be bootable, can SuperDuper achieve this?

MacBook Pro, Mac OS X (10.4.7), 2.16GHz Intel Core Duo, 1GB ram

Posted on Aug 2, 2006 6:00 AM

Reply
Question marked as Best reply

Posted on Aug 2, 2006 6:07 AM

Superduper yes requires some sort of volume that can store data. With its built-in scripting mechanism you can specify where you want the destination files to be. However, the only bootable type of solution which follows your needs is an external hard drive. And yes Superduper makes a bootable backup to any external hard drive that is Firewire that has that capability. Three I'm familiar with that do are http://www.macsales.com/ http://www.lacie.com/ and http://www.granitedigital.com/

Since you posted in the MacBook Pro forum, there have been some who have succeeded in making Intel Macs also bootable from external USB hard drives. Don't know which of those do support booting and not.

Mac OS X will boot on Mac OS X Server based networks, but that's a whole different story and something someone in the Mac OS X Server forum would better know how to work.
20 replies
Question marked as Best reply

Aug 2, 2006 6:07 AM in response to elutz

Superduper yes requires some sort of volume that can store data. With its built-in scripting mechanism you can specify where you want the destination files to be. However, the only bootable type of solution which follows your needs is an external hard drive. And yes Superduper makes a bootable backup to any external hard drive that is Firewire that has that capability. Three I'm familiar with that do are http://www.macsales.com/ http://www.lacie.com/ and http://www.granitedigital.com/

Since you posted in the MacBook Pro forum, there have been some who have succeeded in making Intel Macs also bootable from external USB hard drives. Don't know which of those do support booting and not.

Mac OS X will boot on Mac OS X Server based networks, but that's a whole different story and something someone in the Mac OS X Server forum would better know how to work.

Aug 2, 2006 8:40 AM in response to elutz

I'm pretty sure that SuperDuper will also allow you to back up to a disk image on your local drive. Then you could later copy that disk image to another hard drive, upload it to remote storage (network drive or something like .Mac), or maybe even burn it to a DVD (although it might not fit, depending on how big your backup is).

Of course, your goal should be to store the data somewhere other than your local drive so you can recover from a catastrophic hardware failure. Ideally, that external storage should also be kept in a different location from your main drive. So leave it at home if you mostly use your MBP out of the house, or keep the drive at work if you use your MBP mostly at home.

Personally, I keep my external FireWire drive at home for convenience since my MBP is usually with me anyway. I use SuperDuper to backup my entire MBP drive to it about once a week. Then, just in case I lose my MBP and my house burns down in the same day, I also keep my most important data on an encrypted disk image and upload to a network server at work. So at any given time, my most important items are in three different locations and on three different pieces of hardware.

Aug 2, 2006 9:09 AM in response to elutz

A disk image is essentially a virtual disk stored on a hard drive. When you double click a disk image, it mounts in the Finder and looks and acts just like a separate hard drive volume, even though it's actually on the same physical disk as your boot volume. You've probably seen these in operation when doing drag-and-drop installations of software. This method is particularly popular with shareware.

To create a disk image, open /Applications/Utilities/Disk Utility.app. Then go to File->New->Blank Disk Image... or File->New->Disk Image from Folder... and you'll get a dialog with several options for naming, compression, encryption, etc.

Choose your settings and click Save. Depending on how much data you've included, it may take a few seconds or minutes to complete. You can then mount the resulting disk image in the Finder to verify that all of your data got copied successfully.

Hope this helps.



Aug 10, 2006 12:07 PM in response to Oleguer Vilella

superduper is great for creating bootable backups...i use it to clone my mac hard drive to a 100gb partition on my external drive....i was using the free version but paid for the full version which allows you to schedule backups as well as run fast updates, where it updates the clone but only files that have changed, so the backup takes fractions of the time....

i highly recommend this program...

Aug 10, 2006 2:03 PM in response to David Lloyd

you cannot backup the whole hard drive, since you have it partitioned they are basically 2 separate hard drives as far as superduper is concerned...i just back up my mac partition and i save all my windows apps/games on my external hard drive anyway so if i lost my windows partition and had to re-install windows i wouldn't lose anything....just the OS itself

you could always just back up both of them separately...

SuperDuper?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.