ebaker1954

Q: prgs not booting

First of all I just bought an early 2009 Mac Pro with 12GB mem. It came loaded Mavericks 10.9.1 on the system. First thing I did was use Migrate to bring over all my applications from my older 2007 Mac Pro. For the most part the programs run but so far I have found that Toast will start to load and it even shows up on the tool bar but doesn't open up. NOTHING. I have tried asking the makers of TOAST but unless I am willing to pay them they wont even acknowledge my question. So I was assuming it was just Toast but now I went to make a bootable flash drive copy of Mavericks and when I go to run that program from the computer it too starts loading like normal but NOTHING. So far that is the only two programs I have come across that is acting like that. I have ran photoshop 6, microsoft word, snap pro and numerous other programs that I both brought over from the old system and others that I have loaded onto the new system from disk and online so I am totally confused as to what I might causing the problem and how to trouble shoot it and fix it. Any and all suggestions would be greatly appreciated

Ed

Posted on Jan 29, 2014 7:42 PM

Close

Q: prgs not booting

  • All replies
  • Helpful answers

  • by Grant Bennet-Alder,

    Grant Bennet-Alder Grant Bennet-Alder Jan 29, 2014 7:48 PM in response to ebaker1954
    Level 9 (61,390 points)
    Desktops
    Jan 29, 2014 7:48 PM in response to ebaker1954

    What version of Toast are you complaining about?

     

    What are you doing to make this system copy onto a Thumb drive? "when I go to run that program..." what program would that be?

  • by ebaker1954,

    ebaker1954 ebaker1954 Jan 29, 2014 8:28 PM in response to Grant Bennet-Alder
    Level 1 (0 points)
    Jan 29, 2014 8:28 PM in response to Grant Bennet-Alder

    First of all I'm not complaining about anything, I'm having trouble and looking for a soultion, as for the version I am using the latest which is Toast Titanium 11

    As for the Maverick I am following apple's suggestion and I have gone through disk utility and partioned the flash drive and then remove the check mark from the ownership box. I then went back to start the install so that I could direct it to install on the flash drive but no luck.

  • by Linc Davis,Helpful

    Linc Davis Linc Davis Jan 29, 2014 8:52 PM in response to ebaker1954
    Level 10 (208,037 points)
    Applications
    Jan 29, 2014 8:52 PM in response to ebaker1954

    The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.

    1. You don't own another Mac.

    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.

    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.

    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.

    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.

    2. You do own another Mac.

    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. You will need the Apple ID and password that you used to upgrade. Note that if your other Mac was never upgraded in the App Store, you can't use this method.

    Once booted from the disc, the USB device, or Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.

    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.

    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.

    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • by ebaker1954,

    ebaker1954 ebaker1954 Jan 29, 2014 9:05 PM in response to Linc Davis
    Level 1 (0 points)
    Jan 29, 2014 9:05 PM in response to Linc Davis

    As stated I own two Mac Pros (2007 and early 2009). I have purchased all my upgrade software from apple including Lion which I had been told would run on my 2007 model and its doesn't, no matter, I just purchased the early 2009 from MEGAMACS and the system came installed with OS 10.9.1 or so it says on the "about this mac" marquee. funny thing though, when I have ran checks on the system using Mac Helpmate and another program I don't recall at the moment both stated I had Mountain Lion installed. Go figure. There are been a ton of "little things" that have slowed me down getting back up to speed with this newer system. As for using software I didn;t buy I DON'T. anyway thanks for taking the time to reply

    Ed