chloeshaw7708

Q: macbook air gets really hot and i can hear a fan

i recently brought a macbook air second had its in really good condtion, the first time i used it, it got hot pretty quickly and now i can hear a fan like noise?

Posted on Feb 25, 2014 1:51 AM

Close

Q: macbook air gets really hot and i can hear a fan

  • All replies
  • Helpful answers

  • by LowLuster,

    LowLuster LowLuster Feb 25, 2014 3:13 AM in response to chloeshaw7708
    Level 6 (12,074 points)
    Feb 25, 2014 3:13 AM in response to chloeshaw7708

    How old it is? How was it used before you bought it? Could be it is loaded with dust.

     

    Right you hear the fan because it is trying to keep the system cool. That is noraml once it heats up and depending on what you are doing on it the system will heat faster when used with a heavy load on it.

  • by chloeshaw7708,

    chloeshaw7708 chloeshaw7708 Feb 25, 2014 12:20 PM in response to LowLuster
    Level 1 (0 points)
    Feb 25, 2014 12:20 PM in response to LowLuster

    It is a 2012 model, i have only beeing using the interent for downloading music, and i have been useing pages.

  • by Linc Davis,

    Linc Davis Linc Davis Feb 25, 2014 3:00 PM in response to chloeshaw7708
    Level 10 (208,037 points)
    Applications
    Feb 25, 2014 3:00 PM in response to chloeshaw7708

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.

    1. You don't own another Mac.

    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.

    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.

    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.

    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.

    2. You do own another Mac.

    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.

    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.

    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.

    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.

    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • by OGELTHORPE,

    OGELTHORPE OGELTHORPE Feb 25, 2014 3:30 PM in response to chloeshaw7708
    Level 9 (52,776 points)
    Mac OS X
    Feb 25, 2014 3:30 PM in response to chloeshaw7708

    Have you tried a SMC reset?

     

    http://support.apple.com/kb/ht3964

     

    Cioao.