Apple Event: May 7th at 7 am PT

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

How do i reset a Macbook pro 13" whose hardware has been upgraded, without any operating system disks?

I have a macbook pro 13" (early 2011) upgraded to a 500gb SSD and 16G of Ram. This was purchased over ebay and is a used computer. I would like to clean wipe all the data on this computer and reinstall the OS so the computer is as new without any traces of the past data. I do not have any operating system disks. Please advice. Currently i have OS X Mavericks 10.9.2 installed.

MacBook Pro, OS X Mavericks (10.9.2), Early 2011

Posted on Mar 20, 2014 1:13 AM

Reply
Question marked as Best reply

Posted on Mar 20, 2014 2:02 AM

If the machine came with Mavericks then the OS will be tied to the previous owners Apple ID. So you need your own copy tied to your Apple ID.


The simplest method would be to get a 8GB+ USB flash drive, download Mavericks from the Mac App Store using your own Apple ID, quit the installation process and make a bootable installation disk using DiskMaker X. Then boot from the flash drive, erase the SSD using Disk Utility and then install Mavericks.


Pretty simple,


Clinton

9 replies
Question marked as Best reply

Mar 20, 2014 2:02 AM in response to kraken84

If the machine came with Mavericks then the OS will be tied to the previous owners Apple ID. So you need your own copy tied to your Apple ID.


The simplest method would be to get a 8GB+ USB flash drive, download Mavericks from the Mac App Store using your own Apple ID, quit the installation process and make a bootable installation disk using DiskMaker X. Then boot from the flash drive, erase the SSD using Disk Utility and then install Mavericks.


Pretty simple,


Clinton

Mar 20, 2014 3:29 AM in response to clintonfrombirmingham

Hi thanks for your reply. I just want to clarify originally the machine had a previous operating system which was OS Lion i believe and the previous owner had then upgraded to Mavericks. So originally it did'nt come with Mavericks Does it matter I just wanted to make sure before i begin the process. I already have signed on the app store with my apple ID and i am currently downloading Mavericks.

Thanks very much again.

Cheers !

Mar 20, 2014 3:46 AM in response to kraken84

The early 2011 model came with both Snow Leopard and DVD discs to reinstall that version of OS X and Lion on later released units after Lion came out.


To see if your Early 2011 model came with Lion originally boot to the Online internet Recovery system. To do that at startup hold down the Command + Option/alt + r keys and keep them held down until you see a globe on the screen. From the screen that comes up you can repartition the HDD/SSD as One partition, to Remove all data and get rid of the Mavericks built in Recovery HD partition, Using Disk Utility. Once that is done then try to download Lion by selecting Reinstall Mac OS X from the list on the original screen. If your Mac came with Lion originally when it was new Lion will be downloaded and installed.


If it originally came with Snow Leopard you will get an error when you try to download Lion. In that case you'll need to contact Apple by phone and Order a Replacement Set of Original System Reinstall DVDs.

Mar 20, 2014 11:44 AM in response to kraken84

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.

1a. If you don't own another Mac

If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.

If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.

To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.

If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.

1b. If you do own another Mac

If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.

2. Partition and install OS X

If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.

Launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.

After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.

Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

3. Other issues

If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.

If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

Mar 21, 2014 5:39 AM in response to Linc Davis

Hi thanks for your detailed reply.

I do have another MAC and i checked the OS on that is 10.7.5 so i am currently updating that to the latest version of mavericks so that i can make a bootable USB drive.


The scenario in step 2 where you mention if the first owner has set a firmware password or the machine being remotely locked via icloud and i do not have the password immediately, can i roll back the installation or would i be stuck at this set up screen till i get this issue resolved i.e. either by getting the password from the previous owner or taking it to an authorized service provider.


Also since it was bought over eBay would the proof of purchase be sufficiant or would i have to get the proof of purchase from the previous owner.


How do i reset a Macbook pro 13" whose hardware has been upgraded, without any operating system disks?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.