Hi,
My iPhone 5 doesn't appear LTE while my wife iP5s have LTE. We both using same carrier with LTE support. I have put the phone side by side also but the iP5s have LTE not mine. Does my iP5 need to change its firmware because I have resetting everything including my nano sim but it still the same. currently using ios 7.1
anyone can help me what to do?
iPhone 5, iOS 7.1
Was the iPhone bought in Malaysia?
Hi ckuan.
Yup, bought it in Malaysia
Are you using one of these carrier:
| Celcom | Celcom Support3 | ✓ | ✓ | ✓ | |
| DiGi | DiGi Support3 | ✓ | ✓ | ✓ | |
| Maxis | Maxis Support3 | ✓ | ✓ | ✓ | ✓ |
Im using Maxis carrier with LTE support..Maxis has reset my sim and they confirm that my LTE is enable..when i put my sim into my wife iP5s, i got LTE. When i changed back to my iP5, there is no LTE..for your info, my setting in iP5 has On Enable LTE..so what shoulf i do next?
iPhone 5 (GSM International)
UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 3, 5)
iPhone 5s
A1533 (GSM): UMTS/HSPA+/DC-HSDPA (850, 900, 1700/2100, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 2, 3, 4, 5, 8, 13, 17, 19, 20, 25) A1533 (CDMA): CDMA EV-DO Rev. A and Rev. B (800, 1700/2100, 1900, 2100 MHz); UMTS/HSPA+/DC-HSDPA (850, 900, 1700/2100, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 2, 3, 4, 5, 8, 13, 17, 19, 20, 25) A1453: CDMA EV-DO Rev. A and Rev. B (800, 1700/2100, 1900, 2100 MHz); UMTS/HSPA+/DC-HSDPA (850, 900, 1700/2100, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 2, 3, 4, 5, 8, 13, 17, 18, 19, 20, 25, 26) A1457: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 2, 3, 5, 7, 8, 20) A1528: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz)；GSM/EDGE (850, 900, 1800, 1900 MHz) A1530: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); FDD-LTE (Bands 1, 2, 3, 5, 7, 8, 20); TD-LTE (Bands 38, 39, 40)
Notice the network differences?
You can check if you get any carrier updates in
Settings > General > About
Read here:
http://support.apple.com/kb/HT1970
By the way do you have enable 4G in Settings > Mobile/Cellular?
So the iP5 still support the LTE right?
Yes, the LTE is on in the setting..the carrier is up to date
Is the firmware cause of this failure?
Check your bands.
What do you see on your statusbar?
It appear MY MAXIS 3G only at the status bar..
Can u tell how to check the bands? Thank you soo much
I looked at the back of my phone it show model A1429..but in setting > general > about > legal > regulatory it shows the phone model is A1428 ... Does this also causing i can't get any LTE? I just found out just now
You cannot check the bands without tools.
Read this and also talk to your carrier.
Best show the the 2 iPhones
Alright..thanks ckuan..i will try my best
Both models are different
One is GSM, 1428 other CDMA, 1429.*
Both provide LTE Support but in different frequency bands.
https://www.apple.com/iphone/LTE/
*With GSM port open.
Message was edited.
Hudd Habiborrahman wrote:
I looked at the back of my phone it show model A1429..but in setting > general > about > legal > regulatory it shows the phone model is A1428 ... Does this also causing i can't get any LTE? I just found out just now
Strange indeed:
A1428 is iPhone 5 (GSM North America)
A1429 is iPhone 5 (GSM International)
LTE problem (Malaysia)
