Help my macbook pro will not turn on i am using leopard and my keyboard will and my computer will but the screen wontand wheni start it up the light on the right of the computer at the front starts blinking
MacBook Pro
Hello, see if this helps...
The following table lists the new tones and their meaning:
Tone(s) Description
1 tone, a 5-second pause, repeat No RAM installed
3 successive tones, a 5-second pause, 3 successive tones RAM does not pass data integrity check
1 long tone when holding down the power button Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
3 long tones, 3 short tones, 3 long tones Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
http://support.apple.com/kb/HT2538
Older meanings...
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
MY MAC BOOK PRO SCREEN WONT TURN ON AND WHEN I START IT UP THE INDERCADER LIGHT FLASHES
