HT202012: Aperture 3: Frequently Asked Questions (FAQ)

Learn about Aperture 3: Frequently Asked Questions (FAQ)
colintravelfreak

Q: Photoes becoming corrupted

Does anyone know what causes pictures to become corrupted when using Viewer? This is an intermittent fault. Occasionally a is replaced by bright colourrs on a white background.

iMac

Posted on Apr 5, 2014 4:20 AM

Close

Q: Photoes becoming corrupted

  • All replies
  • Helpful answers

Page 1 Next
  • by léonie,

    léonie léonie Apr 5, 2014 4:30 AM in response to colintravelfreak
    Level 10 (106,814 points)
    iLife
    Apr 5, 2014 4:30 AM in response to colintravelfreak

    Something similar to this?

    Screen Shot 2014-04-05 at 13.26.26.PNG

    Check your "View" menu if "Highlight Hot and Cold Areas" is active. Or "Onscreen Proofing" with an unsuitable color profile.

     

    You can toggle Highlight Hot and Cold Areas"  on and off with ⌥⇧H  (option-shift-H).

  • by colintravelfreak,

    colintravelfreak colintravelfreak Apr 5, 2014 4:49 AM in response to léonie
    Level 1 (7 points)
    Apr 5, 2014 4:49 AM in response to léonie

    Hi Ieonie,

     

    I get this on some photos

     

    file:///Users/colinmassey2/Desktop/Screen%20Shot%202014-04-05%20at%2012.46.26.pn g
    "highlight hot and cold areas" isnt active. I've checked the colour profile and tht is correct.
  • by léonie,Helpful

    léonie léonie Apr 5, 2014 4:52 AM in response to colintravelfreak
    Level 10 (106,814 points)
    iLife
    Apr 5, 2014 4:52 AM in response to colintravelfreak

    The link you gave points to your Desktop. Better upload your screenshot using the camera icon in the Editor toolbar:

    Screen Shot 2014-04-05 at 13.51.45.PNG

  • by colintravelfreak,

    colintravelfreak colintravelfreak Apr 5, 2014 5:00 AM in response to léonie
    Level 1 (7 points)
    Apr 5, 2014 5:00 AM in response to léonie

    The problem occurs in series. I will get shots I’ve taken in over half an hour all corrupting. Then I move location and take some more photos and they are OK.

    Screen Shot 2014-04-05 at 12.46.26.png

  • by léonie,Helpful

    léonie léonie Apr 5, 2014 5:07 AM in response to colintravelfreak
    Level 10 (106,814 points)
    iLife
    Apr 5, 2014 5:07 AM in response to colintravelfreak

    Are the originals corrupted, or only displaying currupted in the Viewer?  When you export the original and view it in Preview, is it o.k.?

  • by colintravelfreak,

    colintravelfreak colintravelfreak Apr 5, 2014 5:25 AM in response to léonie
    Level 1 (7 points)
    Apr 5, 2014 5:25 AM in response to léonie

    When I look at the photos in the "Browser" they are OK.

    If I open them in "Viewer" they become corrupt.

    If I export originals and view them in "Preview" they are OK.

  • by colintravelfreak,

    colintravelfreak colintravelfreak Apr 6, 2014 1:40 AM in response to léonie
    Level 1 (7 points)
    Apr 6, 2014 1:40 AM in response to léonie

    Hello again,

     

    What do you think causes this?

  • by léonie,

    léonie léonie Apr 6, 2014 2:23 AM in response to colintravelfreak
    Level 10 (106,814 points)
    iLife
    Apr 6, 2014 2:23 AM in response to colintravelfreak

    When I look at the photos in the "Browser" they are OK.

    If I open them in "Viewer" they become corrupt.

    If I export originals and view them in "Preview" they are OK.

    So the originals are o.k.? Can Aperture show the original o.k.? While viewing the image in the Viewer type the "M" key. This will toggle between original and version. You will see "Original Image" overlayed on the image.

    Screen Shot 2014-04-06 at 11.07.08.PNG

    If that looks o.k., try "Photos >  New version from Original" or "Photos > Reprocess original".

    If not, reimport the exported original and see, if Aperture now can process it correctly.

     

    There may be a corruption of your Aperture library, causing some versions to be read incorrectly. If you have not done so recently, I'd run the Aperture library First Aid Tools: 

    Launch Aperture while holding down the key combination option-command ⌥⌘ and continue to hold down the keys firmly, until you are seeing the Library First Aid panel.  Select "Repair database" from the panel and let the repair run. That may take a very long time, sometimes hours for a large database, without any apparent progress, so let it run.

     

    It is hard to tell from the problems you are seeing, what exactly is causing this. If you have plenty of free disk space on your system drive, formatted all drives correctly, all software updated to the latest versions, check this link, to see what you not yet tried: Aperture 3: Troubleshooting Basics

     

    Sometimes these random image corruptions can indicate hardware trouble - a bad block on your drive or problem with the RAM. If you can exclude all software problems, run a disk check and check your RAM.

  • by colintravelfreak,

    colintravelfreak colintravelfreak Apr 6, 2014 3:04 AM in response to léonie
    Level 1 (7 points)
    Apr 6, 2014 3:04 AM in response to léonie

    Typing "M" shows the same corrupt version.

    "Photos >  New version from Original" and "Photos > Reprocess original" gives me the same corruption.

    Switching between "Use JPEG as original" and "Use RAW as original gives me the same corruption.

    Reimporting the exported original as an ORF file (Olympus Raw Image file) is corrupt.

    But...Reimporting the exported orignal as a JPEG file is OK and can be processed correctly!

    I will now run the the first aid tools.

  • by léonie,

    léonie léonie Apr 6, 2014 3:18 AM in response to colintravelfreak
    Level 10 (106,814 points)
    iLife
    Apr 6, 2014 3:18 AM in response to colintravelfreak

    If you cannot process the reimported raw image, there may be a problem with your raw decode settings:

     

    Have you tried to change your "Raw Fine Tuning settings" in the Adjustments?

    Try, if removing your camera default or removing all raw fine tuning presets can help (from the menu behind the gears icon):

    Screen Shot 2014-04-06 at 12.13.06.PNG

     

    If that does not change anything, quit Aperture, remove this files from your user library, and restart the system:

     

    ~/Library/Application Support/Aperture/Raw Decode Presets.plist

     

    You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:

     

    • Select the "Home" folder icon (the little house)  in the Finder's sidebar and press the key combination ⌘J to open the "view options".
    • Enable "Show Library Folder".
    • Then open the Home folder and open the Library folder inside and navigate to ~/Library/Application Support/Aperture

  • by colintravelfreak,

    colintravelfreak colintravelfreak Apr 6, 2014 3:39 AM in response to léonie
    Level 1 (7 points)
    Apr 6, 2014 3:39 AM in response to léonie

    Hum interesting...There is no "Raw Decode Presets.plist" in "~/Library/Application Support/Aperture"

  • by léonie,

    léonie léonie Apr 6, 2014 3:50 AM in response to colintravelfreak
    Level 10 (106,814 points)
    iLife
    Apr 6, 2014 3:50 AM in response to colintravelfreak

    Hum interesting...There is no "Raw Decode Presets.plist" in "~/Library/Application Support/Aperture"

    Then you have probably never saved your own camera presets. It is only necessary, if you do not like the Aperture defaults for your camera.

  • by léonie,

    léonie léonie Apr 6, 2014 3:55 AM in response to léonie
    Level 10 (106,814 points)
    iLife
    Apr 6, 2014 3:55 AM in response to léonie

    The problem occurs in series. I will get shots I’ve taken in over half an hour all corrupting. Then I move location and take some more photos and they are OK.

    Have you tried, if the camera, your, card, your card reader could be causing this?

    Do you have backups of the original image files directly from your card to compare? Or are the originals still on the card, so you could import again and compare?

     

    It would help to be able to exclude the camera as the source of the trouble by making a few tests with a different card, reformatted in the camera.

  • by colintravelfreak,

    colintravelfreak colintravelfreak Apr 6, 2014 4:14 AM in response to léonie
    Level 1 (7 points)
    Apr 6, 2014 4:14 AM in response to léonie

    I don't have the original images on the card anymore but I do have them on my iPad.

     

    The currupt photos (about 50) are from a set I took in India. The process I used was to transfer the photos to the iPad each evening to make space on the card. I did some basic editing on the iPad but this was mainly to eliminate unwanted photos. None of the currupt files had been edited. On my return home I transferred the photos to my iMac

     

    I'm now suspecting that it is this process that is the cause of the problem because I've never encountered it when transferring from camera to iMac. I will now try transferring the relevant files from the iPad to the iMac and see what I get.

Page 1 Next