I want to replace a Cisco router with my new airport extreme. I have several cameras set up with static ip's in the range of 10.0.0.###, and it would take tall ladders and several hours to reset them all to a different range. But the airport isnt allowing me to match that range....what am I doing wrong?
Mac Pro, iOS 6.1.4
No. You cannot use 10.0.0.1 as this is reserved for the base station itself ... and you cannot use any IP address above 10.0.0.254, as .255 is reserved and the range can't go higher than that.
So the maximum range would be 10.0.0.2 - 10.0.0.254
thanks and dhpc range 10.0.0.1 to 10.0.0.256 can be ?
Apple defaults are 10.0.1.1 for the AirPort Extreme and the range for connected devices would be 10.0.1.2 through 10.0.1.200.
Should be no problem to change the range to 10.0.0.2 through 10.0.0.200. The AirPort Extreme will get 10.0.0.1 by default when you do this.
I dont get there. I get this:
or this:
I originally posted the Network Options screen.
On the top screen of your post with the Router Mode of DHCP and NAT......click Network Options.
No, but 10.0.0.1 to 10.0.0.255 will probably work. Try 10.0.0.1 to 10.0.0.254 if ".255" does not work.
Airport Extreme: Need range of 10.0.0.1-200
