How is the correct setup to connect my airport extreme with a lan-router Hitron CVE-30360?

Question

Level 1

0 points

How is the correct setup to connect my airport extreme with a lan-router Hitron CVE-30360?

I have connected my airport extreme with a lan-router Hitron CVE-30360 from "Kabel Deutschland". I have problems with the speed in the W-Lan.

The following structure and setup I have at the moment:

Lan Modem Hitron CVE-30360:

Bridge mode: off

LAN DHCP: active

Lease time: 1 week

DHCP start IP: 192.168.0.10

DHCP End IP: 192.168.0.199

Airport extreme:

W-Lan: 2.4 GHz and 5 GHz

Router mode: off(bridge mode)

iPad 2, iOS 6.1.3, Download purchased videos

Posted on May 3, 2014 12:41 AM

Reply

Answer 1

Sep 28, 2015 2:08 PM in response to horses1206

I am using the CVE-30360 as well. Setup your Airport Extreme (AE) in Bridge-mode. Using the Airport utility on a Mac, Click on the image portraying your AE>click Edit>go to Networks> choose Bridge mode from the pop-up menu. Create your WiFi network as you normally would. The only problem I have been unable to solve is configuring the Guest Network to access the Internet. Apparently, the AE requires that it be the DHCP for the guest network to access the internet. Hope this helps, if not check out this post: Connecting Airport Extreme Base Station and HiTron CGN3 . I know its a different model Hitron, but the method is correct. I've used it in two locations thus far.

Reply