forgot my guided access password

I forgot my guided access password and can't figure it out

Both of the previous answers are wrong, and I realize this is old, but I'm posting for anyone who comes across this in the future looking for the same answer.

On my son's iOS 8.1.2 iPad Mini, the solution was:

1. Force shutdown the iPad by holding the power and home buttons for about 10 seconds

2. Restart the iPad

3. Go to Settings -> Accessibility -> Guided Access and change the passcode

Note, that this iPad already has a passcode set to unlock it. I understand if there is no passcode set, then it reboots back into the same locked app.

Tony

I forgot my guide password

This does not help if you cannot shut off your ipad, which happens when you cannot get out of guided access.

The previous answer works if ipad has passcode set,

if not you can put the device into lost mode with find my iPhone, this adds a passcode to the device and will allow you to reboot and change passcode as above

David

How can I unlock my iPad if I forgot the passcode?

http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html

iOS: Device disabled after entering wrong passcode

http://support.apple.com/kb/ht1212

How can I unlock my iPad if I forgot the passcode?

http://tinyurl.com/7ndy8tb

How to Reset a Forgotten Password for an iOS Device

http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device

Using iPhone/iPad Recovery Mode

http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm

You may have to do this several times.

Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.

~~~~~~~~~~~~~

‘iPad is disabled’ fix without resetting using iTunes

Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.

I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).

Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:

1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.

2. Open iTunes with the iPad disconnected.

3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.

4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).

5. Click ‘Setup as new iPad’ and then click restore.

6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.

7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.

8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.

If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.

~~~~~~~~~~~~~

Try it and good luck. You have nothing more to lose if it doesn't work for you.

 Cheers, Tom 😉

FORCE IPAD INTO RECOVERY MODE

1. Turn off iPad

2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)

3. Plug USB cable into computer's USB port

4. Hold Home button down and plug the other end of cable into docking port.

DO NOT RELEASE BUTTON until you see picture of iTunes and plug

5. Release Home button.

ON COMPUTER

6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.

7. Select "Restore iPad"...

Note:

1. Data will be lost if you do not have backup

2. You must follow step 1 to step 4 VERY CLOSELY.