Jamesretief

Q: Safari only loading secure sites

Since applying the recent Mavericks update (10.9.3) which included updating to Safari 7.0.4, I can only access secure sites. I have tried using Chrome and Firefox but the same problem exists. Any advice would be appreciated.

iMac, OS X Mavericks (10.9.3)

Posted on May 27, 2014 9:06 AM

Close

Q: Safari only loading secure sites

  • All replies
  • Helpful answers

  • by Carolyn Samit,

    Carolyn Samit Carolyn Samit May 27, 2014 12:53 PM in response to Jamesretief
    Level 10 (120,370 points)
    Apple Watch
    May 27, 2014 12:53 PM in response to Jamesretief

    Check your settings in System Preferences > Security & Privacy > Firewall

  • by Linc Davis,

    Linc Davis Linc Davis May 27, 2014 1:38 PM in response to Jamesretief
    Level 10 (207,926 points)
    Applications
    May 27, 2014 1:38 PM in response to Jamesretief

    Please read this whole message before doing anything.

    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.

    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.

    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.

    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.

    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.

    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

    Test while in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • by Jamesretief,

    Jamesretief Jamesretief May 28, 2014 7:12 AM in response to Linc Davis
    Level 1 (0 points)
    May 28, 2014 7:12 AM in response to Linc Davis

    Many thanks for the advice.

     

    Everything worked perfectly and I was able to access any sites when in safe mode. As soon as I restarted in normal mode it reverted to only being able to access secure sites.

  • by Linc Davis,

    Linc Davis Linc Davis May 28, 2014 7:58 AM in response to Jamesretief
    Level 10 (207,926 points)
    Applications
    May 28, 2014 7:58 AM in response to Jamesretief

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.

    Here's a summary of what you need to do, if you choose to proceed:

    ☞ Copy a line of text in this window to the Clipboard.

    ☞ Paste into the window of another application.

    ☞ Wait for the test to run. It usually takes a few minutes.

    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.

    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.

    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.

    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.

    Triple-click anywhere in the line of text below on this page to select it:

    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple |Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' ' {/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' ' -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist ' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` " /e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf " list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
      
    Copy the selected text to the Clipboard by pressing the key combination command-C.

    7. Launch the built-in Terminal application in any of the following ways:

    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.

    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.

    8. If you see an error message in the Terminal window such as "syntax error," enter

    exec bash

    and press return. Then paste the script again.

    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.

    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line

    [Process completed]

    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.

    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.

    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.

    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.

    ________________________________

     
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
  • by Jamesretief,

    Jamesretief Jamesretief May 28, 2014 10:57 AM in response to Linc Davis
    Level 1 (0 points)
    May 28, 2014 10:57 AM in response to Linc Davis

    Model Identifier: iMac10,1

    System Version: OS X 10.9.3 (13D65)

    Kernel Version: Darwin 13.2.0

    Boot Mode: Normal

    Time since boot: 13:52

     

     

    USB

     

     

       JM20336 SATA, USB Combo (JMicron Technology Corp.)

     

     

    Log

     

     

       May 27 16:55:10 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 27 16:55:10 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 27 16:55:10 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 27 16:55:10 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 27 16:55:10 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 27 16:55:10 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 27 16:55:30 process com.apple.WebKit[2783] thread 483282 caught burning CPU! It used more than 50% CPU (Actual recent usage: 88%) over 180 seconds. thread lifetime cpu usage 282.217734 seconds, (281.085891 user, 1.131843 system) ledger info: balance: 90007221453 credit: 282195759883 debit: 192188538430 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 101292344823

       May 27 16:56:13 process Safari[2862] thread 495566 caught burning CPU! It used more than 50% CPU (Actual recent usage: 61%) over 180 seconds. thread lifetime cpu usage 90.014490 seconds, (89.817458 user, 0.197032 system) ledger info: balance: 90003957668 credit: 90003957668 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 145896654824

       May 27 17:07:09 process com.apple.WebKit[2885] thread 501500 caught burning CPU! It used more than 50% CPU (Actual recent usage: 63%) over 180 seconds. thread lifetime cpu usage 332.744585 seconds, (331.899534 user, 0.845051 system) ledger info: balance: 90007640109 credit: 332715474029 debit: 242707833920 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 142413046731

       May 27 17:08:12 process com.apple.WebKit[2892] thread 503706 caught burning CPU! It used more than 50% CPU (Actual recent usage: 78%) over 180 seconds. thread lifetime cpu usage 333.729515 seconds, (332.881039 user, 0.848476 system) ledger info: balance: 90005329557 credit: 333700761672 debit: 243695432115 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 114844522976

       May 27 17:12:36 process com.apple.WebKit[2952] thread 525049 caught burning CPU! It used more than 50% CPU (Actual recent usage: 73%) over 180 seconds. thread lifetime cpu usage 90.022021 seconds, (89.860407 user, 0.161614 system) ledger info: balance: 90015783907 credit: 90015783907 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 123262001852

       May 27 17:31:55 process InterCheck[2913] thread 512109 caught burning CPU!; EXC_RESOURCE supressed due to audio playback

       May 27 17:46:18 process AAM Updates Noti[264] caught causing excessive wakeups. Observed wakeups rate (per sec): 731; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45617

       May 27 17:50:46 process Safari[301] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45162

       May 28 05:56:21 process AAM Updates Noti[296] caught causing excessive wakeups. Observed wakeups rate (per sec): 953; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45261

       May 28 16:14:17 process Safari[259] caught causing excessive wakeups. Observed wakeups rate (per sec): 187; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 92196

       May 28 16:51:18 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 28 16:51:18 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 28 16:51:18 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 28 16:51:18 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 28 16:51:18 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 28 16:51:18 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 28 16:51:18 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 28 16:51:18 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

       May 28 16:51:18 /SourceCache/AppleFSCompression_kexts/AppleFSCompression-56/Compressors/Datales s/compressorType5Kext.c:538: Error: failed to get data

     

     

    kexts

     

     

       com.rim.driver.BlackBerryUSBDriverInt (0.0.74)

       com.seagate.driver.PowSecDriverCore (5.2.6)

       com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)

       com.apple.driver.AppleIntelMCEReporter (104)

       com.Cycling74.driver.Soundflower (1.5.2)

       com.sophos.nke.swi (9.0.53)

       com.sophos.kext.sav (9.0.61)

       com.avg.netshield.kext (1.1)

       com.trusteer.driver.gakl_driver_2 (1)

     

     

    Daemons

     

     

       com.sophos.scan

       com.sophos.intercheck

       com.seagate.TBDecorator.plist

       com.zeobit.MacKeeper.plugin.AntiTheft.daemon

       com.trusteer.rooks.rooksd

       com.sophos.webd

       com.sophos.sxld

       com.sophos.notification

       com.sophos.configuration

       com.sophos.autoupdate

       com.macpaw.CleanMyMac2.Agent

       com.google.keystone.daemon

       com.avg.avginfosd

       com.avg.apiServices

       com.adobe.versioncueCS3

       com.adobe.SwitchBoard

       com.adobe.fpsaud

     

     

    Agents

     

     

       com.adobe.PDApp.AAMUpdatesNotifier.45968.UUID

       net.kromtech.MemoryKeeper.Launcher

       com.trusteer.rapport.rapportd

       com.sophos.uiserver

       com.google.keystone.system.agent

       com.avg.LinkScannerAgent

       com.zeobit.MacKeeper.Helper

       com.macpaw.CleanMyMac2Helper.trashWatcher

       com.macpaw.CleanMyMac2Helper.scheduledScan

       com.macpaw.CleanMyMac2Helper.diskSpaceWatcher

       com.adobe.ARM.UUID

       com.adobe.ARM.UUID

     

     

    launchd

     

     

       /System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist

                 (com.apple.AirPortBaseStationAgent)

       /System/Library/LaunchAgents/com.apple.appleseed.seedusaged.plist

                 (com.apple.appleseed.seedusaged)

       /System/Library/LaunchAgents/com.apple.CalendarAgentLauncher.plist

                 (com.apple.CalendarAgentLauncher)

       /System/Library/LaunchAgents/com.apple.java.InstallOnDemand.plist

                 (com.apple.java.InstallOnDemandAgent)

       /System/Library/LaunchAgents/com.apple.java.updateSharing.plist

                 (com.apple.java.updateSharing)

       /System/Library/LaunchAgents/com.apple.mrt.uiagent.plist

                 (com.apple.mrt.uiagent)

       /System/Library/LaunchDaemons/com.apple.appleseed.fbahelperd.plist

                 (com.apple.appleseed.fbahelperd)

       /System/Library/LaunchDaemons/com.apple.displaypolicyd.plist

                 (com.apple.displaypolicyd)

       /System/Library/LaunchDaemons/com.apple.mrt.plist

                 (com.apple.mrt)

       /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist

                 (com.seagate.TBDecorator.plist)

       /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist

                 (com.adobe.AAM.Startup-1.0)

       /Library/LaunchAgents/com.avg.LinkScannerAgent.plist

                 (com.avg.LinkScannerAgent)

       /Library/LaunchAgents/com.google.keystone.agent.plist

                 (com.google.keystone.system.agent)

       /Library/LaunchAgents/com.sophos.uiserver.plist

                 (com.sophos.uiserver)

       /Library/LaunchAgents/com.trusteer.rapport.rapportd.plist

                 (com.trusteer.rapport.rapportd)

       /Library/LaunchDaemons/com.adobe.fpsaud.plist

                 (com.adobe.fpsaud)

       /Library/LaunchDaemons/com.adobe.SwitchBoard.plist

                 (com.adobe.SwitchBoard)

       /Library/LaunchDaemons/com.adobe.versioncueCS3.plist

                 (com.adobe.versioncueCS3)

       /Library/LaunchDaemons/com.avg.apiServices.plist

                 (com.avg.apiServices)

       /Library/LaunchDaemons/com.avg.avginfosd.plist

                 (com.avg.avginfosd)

       /Library/LaunchDaemons/com.google.keystone.daemon.plist

                 (com.google.keystone.daemon)

       /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist

                 (com.macpaw.CleanMyMac2.Agent)

       /Library/LaunchDaemons/com.sophos.autoupdate.plist

                 (com.sophos.autoupdate)

       /Library/LaunchDaemons/com.sophos.configuration.plist

                 (com.sophos.configuration)

       /Library/LaunchDaemons/com.sophos.intercheck.plist

                 (com.sophos.intercheck)

       /Library/LaunchDaemons/com.sophos.notification.plist

                 (com.sophos.notification)

       /Library/LaunchDaemons/com.sophos.scan.plist

                 (com.sophos.scan)

       /Library/LaunchDaemons/com.sophos.sxld.plist

                 (com.sophos.sxld)

       /Library/LaunchDaemons/com.sophos.webd.plist

                 (com.sophos.webd)

       /Library/LaunchDaemons/com.trusteer.rooks.rooksd.plist

                 (com.trusteer.rooks.rooksd)

       /Library/LaunchDaemons/com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist

                 (com.zeobit.MacKeeper.plugin.AntiTheft.daemon)

       Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist

                 (com.adobe.AAM.Scheduler-1.0)

       Library/LaunchAgents/com.adobe.ARM.UUID.plist

                 (com.adobe.ARM.UUID)

       Library/LaunchAgents/com.adobe.ARM.UUID.plist

                 (com.adobe.ARM.UUID)

       Library/LaunchAgents/com.apple.FolderActions.enabled.plist

                 (com.apple.FolderActions.enabled)

       Library/LaunchAgents/com.apple.FolderActions.folders.plist

                 (com.apple.FolderActions.folders)

       Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist

                 (com.macpaw.CleanMyMac2Helper.diskSpaceWatcher)

       Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.scheduledScan.plist

                 (com.macpaw.CleanMyMac2Helper.scheduledScan)

       Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.trashWatcher.plist

                 (com.macpaw.CleanMyMac2Helper.trashWatcher)

       Library/LaunchAgents/com.zeobit.MacKeeper.Helper.plist

                 (com.zeobit.MacKeeper.Helper)

     

     

    Startup items

     

     

       /Library/StartupItems/AvgNetShieldLoader/AvgNetShieldLoader

       /Library/StartupItems/AvgNetShieldLoader/StartupParameters.plist

       /Library/StartupItems/FanControlDaemon/FanControlDaemon

       /Library/StartupItems/FanControlDaemon/StartupParameters.plist

     

     

    Bundles

     

     

       /System/Library/Extensions/AppleIntelMCEReporter.kext

                 (com.apple.driver.AppleIntelMCEReporter)

       /System/Library/Extensions/BJUSBMP.kext

                 (jp.co.canon.bj.kext.BJUSBMP)

       /System/Library/Extensions/hp_fax_io.kext

                 (com.hp.kext.hp-fax-io)

       /System/Library/Extensions/hp_Inkjet1_io_enabler.kext

                 (com.hp.print.hpio.Inkjet1.kext)

       /System/Library/Extensions/hp_Inkjet3_io_enabler.kext

                 (com.hp.print.hpio.Inkjet3.kext)

       /System/Library/Extensions/hp_Inkjet4_io_enabler.kext

                 (com.hp.print.hpio.Inkjet4.kext)

       /System/Library/Extensions/hp_Inkjet5_io_enabler.kext

                 (com.hp.print.hpio.Inkjet5.kext)

       /System/Library/Extensions/hp_Inkjet8_io_enabler.kext

                 (com.hp.print.hpio.inkjet8.kext)

       /System/Library/Extensions/hp_Inkjet_io_enabler.kext

                 (com.hp.print.hpio.Inkjet.kext)

       /System/Library/Extensions/hp_io_printerclassdriver_enabler.kext

                 (com.hp.hpio.hp_io_printerclassdriver_enabler)

       /System/Library/Extensions/hp_Laserjet_io_enabler.kext

                 (com.hp.print.hpio.Laserjet.kext)

       /System/Library/Extensions/hp_Officejet_io_enabler.kext

                 (com.hp.print.hpio.Officejet.kext)

       /System/Library/Extensions/hp_Photosmart_io_enabler.kext

                 (com.hp.print.hpio.Photosmart.kext)

       /System/Library/Extensions/hp_PhotosmartPro_io_enabler.kext

                 (com.hp.print.hpio.PhotosmartPro.kext)

       /System/Library/Extensions/hp_qc_io_enabler.kext

                 (com.hp.hpio.hp_psa530_630_io_enabler)

       /System/Library/Extensions/LexmarkUSBMerge.kext

                 (com.lexmark.print.usbmerge)

       /System/Library/Extensions/RIMBBUSB.kext

                 (com.rim.driver.BlackBerryUSBDriverInt)

       /System/Library/Extensions/RIMBBVSP.kext

                 (com.rim.driver.BlackBerryUSBDriverVSP)

       /System/Library/Extensions/Seagate Storage Driver.kext

                 (com.seagate.driver.PowSecDriverCore)

       /System/Library/Extensions/Soundflower.kext

                 (com.Cycling74.driver.Soundflower)

       /Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component

                 (net.telestream.wmv.import)

       /Library/Extensions/SophosNetworkInterceptor.kext

                 (com.sophos.nke.swi)

       /Library/Extensions/SophosOnAccessInterceptor.kext

                 (com.sophos.kext.sav)

       /Library/Internet Plug-Ins/AdobePDFViewer.plugin

                 (com.adobe.acrobat.pdfviewer)

       /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin

                 (com.adobe.acrobat.pdfviewerNPAPI)

       /Library/Internet Plug-Ins/DivX Web Player.plugin

                 (com.divx.DivXWebPlayer)

       /Library/Internet Plug-Ins/EPPEX Plugin.plugin

                 (N/A)

       /Library/Internet Plug-Ins/Flash Player.plugin

                 (N/A)

       /Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin

                 (net.telestream.wmv.plugin)

       /Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin

                 (com.Google.GoogleEarthPlugin.plugin)

       /Library/Internet Plug-Ins/iPhotoPhotocast.plugin

                 (com.apple.plugin.iPhotoPhotocast)

       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin

                 (com.apple.java.JavaAppletPlugin)

       /Library/Internet Plug-Ins/OVSHelper.plugin

                 (com.divx.OVSHelper)

       /Library/Internet Plug-Ins/Silverlight.plugin

                 (com.microsoft.SilverlightPlugin)

       /Library/Internet Plug-Ins/Unity Web Player.plugin

                 (com.unity.UnityWebPlayer)

       /Library/PhonePlugins/Nokia_E75_2v0.phoneplugin

                 (com.nokia.phoneplugin.NokiaE75)

       /Library/PreferencePanes/AppTrap.prefPane

                 (se.konstochvanligasaker.AppTrap.prefpanel)

       /Library/PreferencePanes/DashboardPreferences.prefPane

                 (com.seagate.dashboard.preferences)

       /Library/PreferencePanes/Flash Player.prefPane

                 (com.adobe.flashplayerpreferences)

       /Library/PreferencePanes/Flip4Mac WMV.prefPane

                 (net.telestream.wmv.prefpane)

       /Library/PreferencePanes/LinkScannerSettings.prefPane

                 (com.avg.LinkScannerSettings)

       /Library/PreferencePanes/NTFSforMacOSX.prefPane

                 (com.paragon-software.filesystems.ntfs.prefpanel)

       /Library/PreferencePanes/RapportPreferences.prefPane

                 (com.trusteer.RapportPreferences)

       /Library/PreferencePanes/VersionCueCS3.prefPane

                 (com.adobe.versioncueCS3.VCPrefPane)

       /Library/QuickTime/CanonMJPEGAVI.component

                 (jp.co.canon.MJPEGAVIExporter)

       /Library/QuickTime/CanonMJPEGAVIDec.component

                 (jp.co.canon.CanonMJPEGAVIDec)

       /Library/QuickTime/CanonText.component

                 (jp.co.canon.Text)

       /Library/QuickTime/DivX Decoder.component

                 (com.DivXInc.DivXDecoder)

       /Library/QuickTime/DivX Decoder.component/Contents/Resources

                 (com.DivXInc.DivXDecoder)

       /Library/QuickTime/DivX Encoder.component

                 (com.DivXInc.DivXCodec)

       /Library/QuickTime/Flip4Mac WMV Advanced.component

                 (net.telestream.wmv.advanced)

       /Library/QuickTime/Flip4Mac WMV Export.component

                 (net.telestream.wmv.export)

       /Library/QuickTime/Flip4Mac WMV Import.component

                 (net.telestream.wmv.import)

       /Library/ScriptingAdditions/Adobe Unit Types.osax

                 (N/A)

       /Library/ScriptingAdditions/AVGScriptingAdditions.osax

                 (com.avg.ScriptAdditions)

       /Library/ScriptingAdditions/XMail.osax

                 (org.lestang.osax.xmail)

       /Library/ScriptingAdditions/XMail.osax/Contents/Resources

                 (org.lestang.osax.xmail)

       Library/Address Book Plug-Ins/SkypeABDialer.bundle

                 (com.skype.skypeabdialer)

       Library/Address Book Plug-Ins/SkypeABSMS.bundle

                 (com.skype.skypeabsms)

       Library/Audio/Plug-Ins/Components/A52Codec.component

                 (com.shepmater.A52Codec)

       Library/Caches/com.apple.Safari/Extensions/AVG LinkScanner.safariextension

                 (com.avg.safari.safesearch)

       Library/PreferencePanes/Perian.prefPane

                 (org.perian.PerianPane)

       Library/PreferencePanes/Secrets.prefPane

                 (com.blacktree.Secrets)

       Library/PreferencePanes/VLC Streamer.prefPane

                 (com.HobbyistSoftware.VLCStreamPrefs)

       Library/QuickTime/AC3MovieImport.component

                 (com.cod3r.ac3movieimport)

       Library/QuickTime/Perian.component

                 (org.perian.Perian)

       Library/Widgets/iEyeNet.wdgt

                 (com.digitician.widget.iEyeNet)

       Library/Widgets/iStat nano.wdgt

                 (com.iSlayer.iStatnanoV2.widget)

       Library/Widgets/iStat nano.wdgt/iStatNano.bundle

                 (com.iSlayer.iStatNano.widgetplugin)

       Library/Widgets/iStat nano.wdgt/iStatNano.bundle/Contents/s

                 (com.iSlayer.iStatNano.widgetplugin)

       Library/Widgets/iStat Pro.wdgt

                 (com.iSlayer.iStatpro4.widget)

       Library/Widgets/iStat Pro.wdgt/iStatPro.bundle

                 (com.iSlayer.iStatPro4.widgetplugin)

       Library/Widgets/MightyMonitor.wdgt

                 (com.johnstarmer.widget.MightyMonitor)

       Library/Widgets/MightyMonitor.wdgt/MightyMonitor.widgetplugin

                 (com.johnstarmer.MightyMonitor4.widgetplugin)

       Library/Widgets/MyBandwidth 2.01.wdgt

                 (com.Afrihost.widget.MyBandwidth2)

       Library/Widgets/Percount.wdgt

                 (novisdesign.Percount.widget)

     

     

    dylibs

     

     

       /usr/lib/libruby.2.0.0.dylib

       /usr/lib/libUFSDNTFS.dylib

     

     

    Font issues: 1

     

     

    Firewall: On

     

     

    DNS: 196.7.7.7 (static)

     

     

    Listeners

     

     

       launchd: afpovertcp

       kdc: kerberos

     

     

    Restricted files: 292

     

     

    Safari extensions

     

     

       AVG LinkScanner

     

     

    Widgets

     

     

       MyBandwidth 2.01

       iStat Pro

       MightyMonitor

     

     

    Elapsed time (s): 326

  • by Linc Davis,Helpful

    Linc Davis Linc Davis May 28, 2014 12:03 PM in response to Jamesretief
    Level 10 (207,926 points)
    Applications
    May 28, 2014 12:03 PM in response to Jamesretief

    A.

    Remove "MacKeeper" as follows. First, back up all data.

    "MacKeeper" is a scam with only one useful feature: it deletes itself.

    Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.

    If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.

    IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.

    In the Finder, select

    Go Applications

    from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.

    Quit MacKeeper before dragging it to the Trash.

    Don't empty the Trash. Let MacKeeper delete itself.

    Don't try to drag the MacKeeper Dock icon to the Trash.

    B.

    Remove the Sophos product by following the instructions on this page. If you have a different version, the procedure may be different.

    C.

    Remove "AVG Antivirus" by following the instructions on this page.

    D.

    Remove "CleanMyMac" by following the first set of instructions on this page. If you have a different version of the product, the procedure may be different. Do not drag the CleanMyMac application to the Trash.

    E.

    Remove "Rapport" by following the instructions on this page.

    F.

      

    Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.

      

    Back up all data.

       

    Step 1

       

    If you have more than one user, and the one in question is not an administrator, then go to Step 2.

        

    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):

    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-

       

    This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.

        

    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.

        

    Step 2 (optional)

        

    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.

       

    Start up in Recovery mode. When the OS X Utilities screen appears, select

       

    Utilities Terminal

      

    from the menu bar. A Terminal window will open. In that window, type this:

      

    res

     

    Press the tab key. The partial command you typed will automatically be completed to this:

      

    resetpassword

      

    Press return. A Reset Password window will open. You’re not  going to reset a password.

       

    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.

       

    Select your username from the menu labeled Select the user account if not already selected.

       

    Under Reset Home Directory Permissions and ACLs, click the Reset button.

       

    Select

      

    Restart

      

    from the menu bar.

  • by Linc Davis,

    Linc Davis Linc Davis May 28, 2014 12:03 PM in response to Jamesretief
    Level 10 (207,926 points)
    Applications
    May 28, 2014 12:03 PM in response to Jamesretief

    How to maintain a Mac

     

    1. Make two or more backups of all your files, keeping at least one off site at all times in case of disaster. One backup is not enough to be safe. Don’t back up your backups; all should be made directly from the original data. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.

       

    2. Keep your software up to date. In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.

     

    Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of trouble with system updates.

       

    3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.

      

    It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac" and “MacKeeper” scams, but there are many others.

       

    As a rule, the only software you should install is that which directly enables you to do the things you use a computer for, and doesn't change the way other software works.

      

    Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction.  Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.

      

    Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.

     

    4. Don't install bad, conflicting, or unnecessary fonts. Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions. Deactivate or remove fonts that you don't really need to speed up application launching.

     

    5. Avoid malware. Malware is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but malware is now increasingly common, and increasingly dangerous.

     

    There is some built-in protection against downloading malware, but you can’t rely on it—the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness—not paranoia, which only makes you more vulnerable.

     

    Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.

     

    In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.

     

    Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.

     

    6. Don't fill up your disk/SSD. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a startup failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.

       

    While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.

      

    If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.

      

    7. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.

      

    To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform. A well-made computing device is not something you should have to think about much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that needs a lot of attention, use a PC.

      

    The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

  • by Linc Davis,

    Linc Davis Linc Davis May 28, 2014 12:04 PM in response to Jamesretief
    Level 10 (207,926 points)
    Applications
    May 28, 2014 12:04 PM in response to Jamesretief
    1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
      
    If you find this comment too long or too technical, read only sections 5, 6, and 10.
      
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.

    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
      
    The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
       
    The following caveats apply to XProtect:
    • It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    • It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
      
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
       
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    • It can easily be disabled or overridden by the user.
    • A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    • An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
      
    For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
           
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
     
    5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, and a technological fix is not going to solve it. Trusting software to protect you will only make you more vulnerable.
      
    The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the scam artists. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
      
    Software from an untrustworthy source
    • Software of any kind is distributed via BitTorrent. or Usenet, or on a website that also distributes pirated music or movies.
    • Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, your browser, or anything else.
    • Rogue websites such as Softonic and CNET Download distribute free applications that have been packaged in a superfluous "installer."
    • The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
    Software that is plainly illegal or does something illegal
    • High-priced commercial software such as Photoshop is "cracked" or "free."
    • An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission.
    Conditional or unsolicited offers from strangers
    • A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    • A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
    • You win a prize in a contest you never entered.
    • Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
    • A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
    • Anything online that you would expect to pay for is "free."
    Unexpected events
    • You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
    • An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    • Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
    I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
      
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
      
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
       
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable itnot JavaScript—in your browsers.
       
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.

    Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.

    7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
      
    Why shouldn't you use commercial AV products?
    • To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
    • Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    • By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
    • Most importantly, a false sense of security is dangerous.
    8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
        
    An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
       
    Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
      
    London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
       
    You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an institutional policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
      
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
      
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
        
    10. As a Mac user you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither should you assume that you will always be safe from exploitation, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.
  • by Jamesretief,Solvedanswer

    Jamesretief Jamesretief May 28, 2014 1:38 PM in response to Linc Davis
    Level 1 (0 points)
    May 28, 2014 1:38 PM in response to Linc Davis

    Thank you very, very much - all sorted.

  • by Rick Kovacic,

    Rick Kovacic Rick Kovacic Feb 11, 2016 1:41 PM in response to Jamesretief
    Level 1 (0 points)
    Feb 11, 2016 1:41 PM in response to Jamesretief

    I had a similar problem with Safari and other browsers on my Mac Pro running OS X El Capitan (10.11.x). Except I could load all sites except secure ones using 'https' protocol.

     

    I installed my 3rd Party virus software from Avast, restarted and now have no issues. Draw your own conclusions.

     

    I am only using the System Firewall to guard my machine, and according the tech reps I have talked to, it is robust enough to negate the need for a 3rd party virus solution.