Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

WIFI autoconnect

I have a MacBook Pro, and My Aunt has a MacBook Air. They are both running 10.9.4. But this problem has been with us since 10.9.1.

I set up the WIFI at my Aunt's house using WPA2 Personal. My MacBook Pro auto reconnects to her WIFI every time I visit, as does my iPhone.

But aftey she closes her clamshell for several hours, and openes up again, it will not auto reconnect to her WIFI. But If she runs the

Network Diagnostics, or turns off and on her WIFI, it auto reconnects with no problem.

But just opening up her clamshell after a day or so, it will not reconnect.


I have been collecting several WirelessDiagnostics logs when she reconnects via Network Diagnostics. I cannot see anything in the logs, that indicates a problem.

This seems to be unique to her MacBook Air, but I have not yet had the opportunity to try to have her MB Air learn other WIFI networks other than her home WIFI.

Posted on Jul 6, 2014 1:36 PM

Reply
Question marked as Best reply

Posted on Jul 6, 2014 3:20 PM

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.

1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked

Remember networks this computer has joined

is checked.

2. Follow the instructions in this support article under the heading

Symptom: After restarting or waking from sleep, my computer might not connect to the Internet

3. Reset the PRAM.

4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.

5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.

7. Repair permissions on the startup volume.

8. Turn off Bluetoothand test.

9. Reset the System Management Controller.

10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.

Select the Power Adapter tab and uncheck the boxes marked

Wake for Wi-Fi network access

and

Enable Power Nap...

if present. Then, if the computer is a MacBook, select the Battery tab and uncheck

Enable Power Nap...

11. Reinstall OS X.

2 replies
Question marked as Best reply

Jul 6, 2014 3:20 PM in response to JeffCMKRNL

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.

1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked

Remember networks this computer has joined

is checked.

2. Follow the instructions in this support article under the heading

Symptom: After restarting or waking from sleep, my computer might not connect to the Internet

3. Reset the PRAM.

4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.

5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.

7. Repair permissions on the startup volume.

8. Turn off Bluetoothand test.

9. Reset the System Management Controller.

10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.

Select the Power Adapter tab and uncheck the boxes marked

Wake for Wi-Fi network access

and

Enable Power Nap...

if present. Then, if the computer is a MacBook, select the Battery tab and uncheck

Enable Power Nap...

11. Reinstall OS X.

WIFI autoconnect

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.