Volume RS1:R1V3 unrecoverable media error - One or more bad blocks created in LBA range
I searched and couldn't find any info.
OSX 10.5.8
Model Name: Xserve
Model Identifier: Xserve3,1
Boot ROM Version: XS31.0081.B06
SMC Version (system): 1.43f4
LOM Revision: 1.1.8
This is an Xserve which I don't manage, yet was doing hardware inventory and I found these errors yesterday:
Wednesday, August 20, 2014 3:15:28 PM CT Volume RS1:R1V2 unrecoverable media error - One or more bad blocks created in LBA range 0x2864b21 to 0x2864b21 informational
Wednesday, August 20, 2014 2:52:48 PM CT Volume RS1:R1V1 unrecoverable media error - One or more bad blocks created in LBA range 0x3aa8b63 to 0x3aa8b63 informational
Friday, July 18, 2014 12:01:56 AM CT Volume RS1:R1V1 unrecoverable media error - One or more bad blocks created in LBA range 0x72c1afd to 0x72c1afd informational
Tuesday, July 1, 2014 3:16:52 PM CT Volume RS1:R1V1 unrecoverable media error - One or more bad blocks created in LBA range 0x2c01381 to 0x2c01381 informational
Tuesday, July 1, 2014 12:02:48 AM CT Volume RS1:R1V1 unrecoverable media error - One or more bad blocks created in LBA range 0x5958063 to 0x5958068 informational
Tuesday, July 1, 2014 12:02:37 AM CT Volume RS1:R1V1 unrecoverable media error - One or more bad blocks created in LBA range 0x594ab80 to 0x594ab80 informational
Saturday, June 28, 2014 12:05:56 PM CT Volume RS1:R1V1 unrecoverable media error - One or more bad blocks created in LBA range 0x78de158 to 0x78de158 informational
Sunday, June 1, 2014 3:43:52 PM CT Degraded RAID set RS1 - No spare available for rebuild critical
Sunday, June 1, 2014 3:43:51 PM CT Degraded RAID set RS1 warning
Sunday, June 1, 2014 3:43:51 PM CT Drive 3:5000c500137ba7f7 failure detected - Previous drive status was inuse critical
I replaced the drive and the RAID rebuilt, yet now I still get:
Wednesday, August 20, 2014 10:41:19 PM CT Volume RS1:R1V3 unrecoverable media error - One or more bad blocks created in LBA range 0xc7af000 to 0xc7af001 informational
I'm currently using the RAID Utility to Verify RAID Set.
Should I be doing anything else?
Thanks for any assistance.