Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

iMac 27" (late 2009), freezing - List of solutions tried

Perhaps my tests and trouble shootings can help others to solve their freezing problems entirely or temporary. As for me I'm still after the quest of solving the problem for my iMac. It seems that this problem is quite common for iMacs but also MacBooks and hot topic among Apple Support Communities.

Symptoms:

-Started with occasional freezing with only mouse pointer working. And now freezing on every boot.

-Freezing after a while of normal usage (browsing & etc). Mouse pointer working .

-Freezing on startups, with strange artifacts or mosaics. Still dam mouse working if it's loaded.

-Now freezes on Command+V or Command+S and normal boot.


Solutions tried w/o success:

-SMC reset/s

-PRAM reset/s

-Disk Utility verify/repair permissions

-Disk utility verify/repair disk

-Boot with Command+V and no kernel panic upon freeze

-Boot with Command+S and fsck the drive. All OK

-Onyx cleaning

-Clean install of Mavericks & Mountain Lion (complete updates)

-Clean install of original OSX Snow Leopard (complete updates)

-Apple Service Diagnostic (ASD) Dual Boot 3S138 - all test passes everytime, (onetime freezing on Graphic tests out of 4 tests).

-No kernel panics in Log files

-Fan control to cool down the iMac and GPU Diode using "Macs Fan Control"

-Cleaned air cooling vents and RAM from dusts

-Change of 10.6.2 ATI graphics driver kernel extensions (.kext). Problem loading the kext files at all. Seems that they need to be signed and verified by apple after certain OSX version (source: http://www.pauloamgomes.net/blog/fix-weird-os-x-freeze-imacs-late-2009).


Fan readings (Normal usage on Safe mode):

Ambient 27

CPU Core 0 48

CPU Core 1 48

CPU Heatsink 46

GPU Diode 81

GPU Heatsink 76

LCD Proximity 48

Mem Controller 55

Optical Drive 52

PSU Primary 64

HD 52


Possible solutions left:

(1) Buy new graphic card

(2) "Bake" current GPU card in the oven and re-apply good thermal paste.

(3) Or sell it cheap 😢


No extended warranty left and far away from nearest apple service. No other gadgets connected to the iMac during trouble shooting. Only working state is on Safe mode with limited loaded hardware/software. I can hardly boot normally the past few days. But before that I managed to finally RE-CREATE the freezing problem by using Geeks3D GpuTest. As soon as the test starts the screen would freeze. It seems that the problem originating from the OpenGL and Quartz Extreme.😠 Must be the reason I can boot into safe mode without any freezing, due to Quartz Extreme is disabled in safe mode state.


After hours of trouble shooting and reading forums like a crazy Viking I'm now out of options and ideas. If anyone can assist or advice it would be much appreciated???


Can upload pictures of the freezing and logs if required.


PLZ HELP 😟

iMac, OS X Mavericks (10.9.4)

Posted on Sep 5, 2014 8:00 AM

Reply
13 replies

Sep 5, 2014 8:40 AM in response to B_Baygan

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.

Launch the Console application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad. Click Utilities, then Console in the icon grid.

Step 1

For this step, the title of the Console window should be All Messages. If it isn't, select

SYSTEM LOG QUERIES All Messages

from the log list on the left. If you don't see that list, select

View Show Log List

from the menu bar at the top of the screen.

In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)

Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.

For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.

If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.

When posting a log extract, be selective. A few dozen lines are almost always more than enough.

Some private information, such as your name, may appear in the log. Anonymize before posting.

Please don't indiscriminately dump thousands of lines from the log into this discussion.

Please don't post screenshots of log messages—post the text.

Step 2

In the Console window, select

DIAGNOSTIC AND USAGE INFORMATION System Diagnostic Reports

(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select

View Show Log List

from the menu bar.

There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.

I know the report is long, maybe several hundred lines. Please post all of it anyway.

If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.

In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)

Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Sep 6, 2014 2:48 AM in response to Linc Davis

In response to your help here is the logs you requested. These are the last logs before the iMac crashed and I had to hard-reboot. If you want I can provide with the rest from the top.


STEP1 LOGS

................................

2014-09-06 11:18:32,057 WindowServer[90]: Server is starting up

2014-09-06 11:18:32,197 WindowServer[90]: Session 256 retained (2 references)

2014-09-06 11:18:32,197 WindowServer[90]: Session 256 released (1 references)

2014-09-06 11:18:32,251 WindowServer[90]: Session 256 retained (2 references)

2014-09-06 11:18:32,252 WindowServer[90]: init_page_flip: page flip mode is on

2014-09-06 11:18:33,096 apsd[58]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)

2014-09-06 11:18:33,165 configd[16]: network changed: v4(en1+:192.168.0.11) DNS+ Proxy+ SMB

2014-09-06 11:18:33,240 UserEventAgent[11]: Captive: en1: Not probing '__SKYNET__' (protected network)

2014-09-06 11:18:33,243 configd[16]: network changed: v4(en1!:192.168.0.11) DNS Proxy SMB

2014-09-06 11:18:32,461 ntpd[94]: proto: precision = 1.000 usec

2014-09-06 11:18:32,730 WindowServer[90]: mux_initialize: Couldn't find any matches

2014-09-06 11:18:32,782 WindowServer[90]: GLCompositor enabled for tile size [256 x 256]

2014-09-06 11:18:32,782 WindowServer[90]: CGXGLInitMipMap: mip map mode is on

2014-09-06 11:18:32,799 WindowServer[90]: WSMachineUsesNewStyleMirroring: false

2014-09-06 11:18:32,800 WindowServer[90]: Display 0x04272d40: GL mask 0x1; bounds (0, 0)[2560 x 1440], 36 modes available

Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cb5, S/N 0, Unit 0, Rotation 0

UUID 0x0000061000009cb50000000004272d40

2014-09-06 11:18:32,800 WindowServer[90]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available

off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0

UUID 0xffffffffffffffffffffffff003f003d

2014-09-06 11:18:32,825 WindowServer[90]: Created shield window 0x5 for display 0x04272d40

2014-09-06 11:18:32,825 WindowServer[90]: Created shield window 0x6 for display 0x003f003d

2014-09-06 11:18:32,831 WindowServer[90]: Display 0x04272d40: GL mask 0x1; bounds (0, 0)[2560 x 1440], 36 modes available

Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cb5, S/N 0, Unit 0, Rotation 0

UUID 0x0000061000009cb50000000004272d40

2014-09-06 11:18:32,831 WindowServer[90]: Display 0x003f003d: GL mask 0x2; bounds (3584, 0)[1 x 1], 1 modes available

off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0

UUID 0xffffffffffffffffffffffff003f003d

2014-09-06 11:18:32,831 WindowServer[90]: CGXPerformInitialDisplayConfiguration

2014-09-06 11:18:32,831 WindowServer[90]: Display 0x04272d40: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cb5 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1

2014-09-06 11:18:32,831 WindowServer[90]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1

2014-09-06 11:18:32,947 WindowServer[90]: GLCompositor: GL renderer id 0x01021a07, GL mask 0x00000003, accelerator 0x0000385b, unit 0, caps QEX|QGL|MIPMAP, vram 512 MB

2014-09-06 11:18:32,947 WindowServer[90]: GLCompositor: GL renderer id 0x01021a07, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT

2014-09-06 11:18:33,006 loginwindow[42]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.

2014-09-06 11:18:33,471 WindowServer[90]: Created shield window 0x7 for display 0x04272d40

2014-09-06 11:18:33,472 WindowServer[90]: Display 0x04272d40: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)

2014-09-06 11:18:33,960 airportd[64]: _doAutoJoin: Already associated to “__SKYNET__”. Bailing on auto-join.

2014-09-06 11:18:34,191 launchctl[113]: com.apple.findmymacmessenger: Already loaded

2014-09-06 11:18:34,233 com.apple.SecurityServer[17]: Session 100004 created

2014-09-06 11:18:34,650 BezelServices 235.55[42]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)

2014-09-06 11:18:34,826 WindowServer[90]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.

2014-09-06 11:18:34,869 WindowServer[90]: Display 0x04272d40: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)

2014-09-06 11:18:34,897 WindowServer[90]: Display 0x04272d40: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)

2014-09-06 11:18:35,022 loginwindow[42]: Login Window Started Security Agent

2014-09-06 11:18:35,390 SecurityAgent[123]: This is the first run

2014-09-06 11:18:35,390 SecurityAgent[123]: MacBuddy was run = 0

2014-09-06 11:18:35,445 SecurityAgent[123]: User info context values set for admin

2014-09-06 11:18:37,038 loginwindow[42]: Login Window - Returned from Security Agent

2014-09-06 11:18:37,101 loginwindow[42]: USER_PROCESS: 42 console

2014-09-06 11:18:37,120 airportd[64]: _doAutoJoin: Already associated to “__SKYNET__”. Bailing on auto-join.

2014-09-06 11:18:37,302 com.apple.launchd.peruser.501[126]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self

2014-09-06 11:18:37,306 loginwindow[42]: Connection with distnoted server was invalidated

2014-09-06 11:18:37,318 distnoted[129]: # distnote server agent absolute time: 89.717062427 civil time: Sat Sep 6 11:18:37 2014 pid: 129 uid: 501 root: no

2014-09-06 11:18:37,320 coreaudiod[120]: 2014-09-06 11:18:37.319175 AM [AirPlay] Started browsing for _airplay._tcp.

2014-09-06 11:18:37,320 coreaudiod[120]: 2014-09-06 11:18:37.319954 AM [AirPlay] Started browsing for _raop._tcp.

2014-09-06 11:18:37,718 WindowServer[90]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.

2014-09-06 11:18:38,418 com.apple.SecurityServer[17]: Session 100005 created

2014-09-06 11:18:39,826 awacsd[56]: Exiting

2014-09-06 11:19:30,000 bootlog[0]: BOOT_TIME 1409995170 0


User uploaded file


STEP2 LOGS

Unfortunately there is no logs inside System Diagnostic reports. Triple checked it and took an screen shot for proof.


User uploaded file

Sep 6, 2014 6:02 AM in response to B_Baygan

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.

2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.

You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.

In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.

You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.

Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.

4. Here's a summary of what you need to do, if you choose to proceed:

☞ Copy a line of text in this window to the Clipboard.

☞ Paste into the window of another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Paste the results, which will have been copied automatically, back into a reply on this page.

The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.

5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.

6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.

Triple-click anywhere in the line of text below on this page to select it:

PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-

Copy the selected text to the Clipboard by pressing the key combination command-C.

8. Launch the built-in Terminal application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.

Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.

9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter

exec bash

and press return. Then paste the script again.

10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.

If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line

[Process completed]

to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.

12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.

If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.

14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.

______________________________________________________________

Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Sep 6, 2014 6:35 AM in response to Linc Davis

Start time: 15:15:04 09/06/14


Model Identifier: iMac11,1

System Version: OS X 10.8 (12A269)

Kernel Version: Darwin 12.0.0

Boot Mode: Safe

Time since boot: 3:56


SATA

ST31000528AS


USB

USB Flash Drive (Lexar Media, Inc.)


Log

Sep 5 12:01:08 Sleep failure code 0x00000000 0x31000000

Sep 5 14:36:22 Sleep failure code 0x00000000 0x31000000

Sep 5 14:36:22 jnl: unknown-dev: replay_journal: from: 14881792 to: 23061504 (joffset 0x1d1c000)

Sep 5 14:36:22 jnl: unknown-dev: journal replay done.

Sep 5 14:37:33 Sleep failure code 0x00000000 0x31000000

Sep 5 14:37:33 jnl: unknown-dev: replay_journal: from: 29126144 to: 33365504 (joffset 0x1d1c000)

Sep 5 14:37:33 jnl: unknown-dev: journal replay done.

Sep 5 14:37:57 IOHIDSystem: Seize of AppleEmbeddedKeyboard failed.

Sep 5 14:39:15 Sleep failure code 0x00000000 0x31000000

Sep 5 14:39:15 jnl: unknown-dev: replay_journal: from: 35259904 to: 37479424 (joffset 0x1d1c000)

Sep 5 14:39:15 jnl: unknown-dev: journal replay done.

Sep 5 14:39:39 IOHIDSystem: Seize of AppleEmbeddedKeyboard failed.

Sep 6 11:20:16 Sleep failure code 0x00000000 0x31000000

Sep 6 11:20:16 jnl: unknown-dev: replay_journal: from: 20893184 to: 24809472 (joffset 0x1d1c000)

Sep 6 11:20:16 jnl: unknown-dev: journal replay done.

Sep 6 11:20:42 IOHIDSystem: Seize of IOHIDPointing failed.

Sep 6 11:20:42 IOHIDSystem: Seize of AppleMultitouchHIDEventDriver failed.


Bundles

/Library/Internet Plug-Ins/JavaAppletPlugin.plugin

- com.apple.java.JavaAppletPlugin


Contents of /System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist (XML document text)

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>EnableTransactions</key>

<true/>

<key>KeepAlive</key>

<dict>

<key>PathState</key>

<dict>

<key>/Library/Preferences/com.apple.AirPortBaseStationAgent.launchd</key>

<true/>

</dict>

</dict>

<key>Label</key>

<string>com.apple.AirPortBaseStationAgent</string>

<key>ProgramArguments</key>

<array>

<string>/System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent</string>

<string>-launchd</string>

<string>-allowquit</string>

</array>

</dict>

</plist>


Spotlight: Indexing and searching disabled


Firewall: On


DNS: 83.255.245.11


Restricted files: 896


Elapsed time (s): 877




PS: The terminal asked me twice to input my password if that's any kind of anomalies. If so, I can run the script again!

Sep 6, 2014 8:47 AM in response to Linc Davis

The 1TB Seagate HD was replaced in 2011 as part of Apple Replacement program.


Did you find anything in the log files or script result? Did they indicate some sort HD failure?


I'm still thinking it must be the GPU that is not working properly. Especially when the iMac works in Safe Mode but not in normal boot state. It has to be the Quartz Extreme. Do know how we can disable the Quartz for normal boot testing?

Sep 9, 2014 10:20 AM in response to B_Baygan

Found a way to disable GLCompositor/Quartz. Not sure if it's disabled entire hardware acceleration or parts of it.


1. Open Terminal

2. Copy & Paste below line: sudo defaults write /Library/Preferences/com.apple.windowserver GLCompositor -dict tileHeight -int 0 tileWidth -int 0

3. Restart


Results: The iMac started normally with sound and everything. The rendering was little bit slow and videos 720p not working. It worked for a 30 minutes or so before it would freeze again. After 2-3 restarts, the iMac starts but the would freeze again within 1 min or so.


I guess we are at square one again. Still doesn't make sense - no single freezing in Safe Mode. Has to be GPU and graphic driver related issue!!

iMac 27" (late 2009), freezing - List of solutions tried

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.