When phone is on silent mode, my vibrate feature is not working....any suggestions?

That helped me, too! Thank you!

SO glad I didn't have to "reset settings".

I think you should check your vibration settings. Follow the steps below-

• Settings
• Sounds
• Ringtone
• Vibration

Go to settings and then press sound and on top their will be a button that says vibrate on silent turn it on and then your good

msrenz813 wrote:

I've turned the phone off and on already as well.

So you've done the restart. Try resetting it. You won'd lose any data. Turn your iOS device off and on (restart) and reset

If it's a software issue and your settings are correct then the next step would be to restore your phone to new. Use iTunes to restore your iOS device to factory settings If it's the switch itself then try moving it back and forth several times. Perhaps there's a bit of pocket lint or dirt preventing a good contact. If that doesn't work then you'll have to take the phone into an authorized Apple repair centre or Apple store and have it checked out.

I just ran into this issue. I found out it was the Do not disturb feature was turned on. If the switch next to manual is turned on (blue) turn it off and hopefully this will resolve it.

Of all the weird to happen, this one baffled me...until I went to my accessibility and found the vibration was turned off! I don't recall doing it. Perhaps during a software update? But that fixed my problem!

I noticed my phone recently doing this. The issue with my phone was that the vibrate pattern was set to none. Go to Settings>Sounds>Ringtone>Vibration. Check and make sure it's not set to none. Good luck!

Head to sounds on the settings page then underneath ringer and alerts you should have a button saying change with buttons. This needs to be switched on to enable the vibration.

the accessibility setting was the issue. Thanks!

After checking everything that people suggested in this thread, but with no success, I contacted Apple Support. They had to do a "Reset All Settings" (Settings -> General -> Reset -> Reset All Settings) and that fixed it.

I had this same exact problem. I checked every setting there is that's related to vibration and all settings were good, but still no vibration. I turned the phone off, then back on and boom, vibration now works. Maybe it has to do with the recent update and just needs to be restarted.

My iPhone 6s Plus having vibrate problem and it was turn off and turn on itself automatically since 6 months,

It was frastrating but I did many experiment and finally comes to a great result, so friends follow the below instruction.

Simply backup all your data to iTunes

- go to setting> general > erase all content

Remove the SIM card

And follows the setup step

Once it ask for SIM card to activate the iPhone, then insert your SIM card ...

You are all set

Phone will works fine and vibrate problem will be solved.