CeBaker!

Q: My iphone 6 plus with 8.0.2 os just froze up and died.....help?

My iphone 6 plus 8.0.2 os just froze up and died, what's the problem ....Help???

iPhone 6 Plus, iOS 8

Posted on Oct 9, 2014 8:02 PM

Close

Q: My iphone 6 plus with 8.0.2 os just froze up and died.....help?

  • All replies
  • Helpful answers

  • by joe_7399,Helpful

    joe_7399 joe_7399 Oct 11, 2014 11:44 AM in response to CeBaker!
    Community Specialists
    Oct 11, 2014 11:44 AM in response to CeBaker!

    Hi CeBaker!,

     

    Welcome to the Apple Support Communities!

     

    I know that it can be both concerning and frustrating when you iPhone isn’t working the way you would expect. In this situation there are a specific set of troubleshooting steps I would suggest working through to help resolve the situation. Please use the attached article for information and as a resource.

     

    iPhone: Hardware troubleshooting

     

    Will not turn on, will not turn on unless connected to power, or unexpected power off

    1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    2. Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    3. Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    4. After at least 30 minutes, if:
      • The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
      • The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
      • Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    5. If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
      • If the display turns on, go to step 4.
      • If the display remains black, go to next step.
    6. Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    7. If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

     

    Regards,

    Joe